DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 431.86(b) | HI BTS-2000 | 2001 | Method to Determine Efficiency of Commercial Space Heating Boilers | Hydronics Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | AFTO 11A-1-47 | 1998 | Explosive Hazard Classification Procedures | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) Note | ASM Applied and Environmental Microbiology | 1993 | New Medium for the Simultaneous Detection of Total Coliforms and Escherichia coli in Water. Appl. Environ. Microbiol. 59:3534-3544, Brenner et al. | American Society for Microbiology | |
Environmental Protection Agency | 40 CFR 799.5089(j) Table 3, C7 | ASTM E 1193 | 1997 | Standard Guide for Conducting Daphnia Magna Life-Cycle Toxicity Tests | ASTM International | |
Coast Guard | 46 CFR 110.10-1(f)(5) | IEEE 45 | 1998 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 28, Section 16.1.1 | ASTM D 4442 | 1984 | Standard Test Method for Direct Moisture Content Measurement of Wood and Wood-Based Materials | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.453(b)(3) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Coast Guard | 46 CFR 164.120-5(b)(6) | ASTM D 792 | 2008 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | ASTM D 4190 | 2008 | Metals by Direct Current Plasma | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Toxaphene) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(f)(9) | ASTM D 445 | 1988 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
Environmental Protection Agency | 40 CFR 80.8(e)(1)(ii) | ASTM D 4177 | 2010 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products | ASTM International | |
Coast Guard | 46 CFR 160.077-11(a)(5)(ii) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.173(b)(2)(iii) | Drawing No. SA-572-S11 | 1987 | Six axis neck transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.99(a)(5)(ii)(C) | CA State Regulations | 2010 | California Regulatory Requirements Applicable to the Air Toxics Program | State of California | |
Mine Safety and Health Administration | 30 CFR 75.333(d)(1) | ASTM E 162 | 1987 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source | ASTM International | |
Coast Guard | 46 CFR 27.102(b) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (21) | EPA Method 611 | 1982 | Haloethers GC/ELCD | U.S. Environmental Protection Agency | |
Minerals Management Service | 30 CFR 250.804(a)(5) | API RP 14H | 2007 | Recommended Practice for the Installation, Maintenance and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute | |
Coast Guard | 46 CFR 111.105-1 | IEC 60079-5 | 1997 | Electrical Apparatus for Explosive Gas Atmospheres—Part 5: Powder Filling “q”, Second Edition | International Electrotechnical Commission | |
Research and Special Programs Administration | 49 CFR 192.279 | ASME B16.5 | 2004 | Steel Pipe Flanges and Pipe Fittings | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 108A, 7.1.1 | ASTM D 1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1806-05(h)(1)(ii) | SAE J-1939-31 | 1997 | Network Layer | Society of Automotive Engineers | |
Coast Guard | 33 CFR 126.30(e) | NFPA 51B | 1994 | Standard for Fire Prevention in Use of Cutting and Welding Processes | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (35) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Sulfate) | EPA Method 300.1 | 2000 | Ion chromatography - anions | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(2) | API 650 | 1966 | Welded Steel Tanks for Oil Storage | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 28 | ENH Journal of Chromatography | 1970 | Direct Determination of Elemental Phosphorus by Gas-Liquid Chromatography | Elsevier/North-Holland, Inc. | |
Environmental Protection Agency | 40 CFR 60.17(g)(132) | ASTM D 3270 | 1995 | Standard Test Method for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1917.3(c)(1) | ASTM F 2412 | 2005 | Standard Test Methods for Foot Protection | ASTM International | |
Public Health Service | 42 CFR 37.51(b) | ILO Publication | 2011 | Guidelines for the Use of the ILO International Classification of Radiographs of Pneumoconioses | International Labor Organization | |
National Highway Traffic Safety Administration | 49 CFR 571.5(i)(1) | ISO 7117:1995(E) | 1995 | Motorcycles—Measurement of maximum speed, Second edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (36) | EPA Method 602 | 1982 | Purgeable Aromatics by GC/PID Purge & Trap | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table Note 2 | EPA-600-4-75-008 (Revised) | 1976 | Interim Radiochemical Methodology for Drinking Water | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.107a(d)(6)(v) | ASME MFC-22 | 2007 | Measurement of Liquid by Turbine Flowmeters | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 177.1990(c)(3) | FDA Publication | 1986 | Residual Methyl Acrylate and Vinylidene Chloride Monomers in Saran MA/VDC Resins and Pellets by headspace Gas Chromatography | Food and Drug Administration, U.S. Department of Health and Human Services | |
Housing and Urban Development Department | 24 CFR 3280.703 | ANSI Z21.1 | 2000 | Household Cooking Gas Appliances | American National Standards Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(8) | API RP 2FPS | 2001 | Planning, Designing, and Constructing Floating Production Systems | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(5) | SAE J-185 | 2003 | Access Systems for Off-Road Machines | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 58 Appendix E, 12.0(11) | EPA-450-3-77-013 | 1977 | Optimum Site Exposure Criteria for SO2 Monitoring, Ball, R.J. and G.E. Anderson. | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 24 CFR 200.927 | HUD MPS | 2013 | Minimum Property Standards as contained in the handbooks identified in 24 CFR 200.929(b) | U.S. Department of Housing and Urban Development | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(2)(i), Table I-2 Note | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | AA Publication | 1982 | Aluminum Standards and Data, Seventh Edition | Aluminum Association | |
Environmental Protection Agency | 40 CFR 98.64(a) | EPA Publication | 2008 | Protocol for Measurement of Tetrafluoromethane (CF4) and Hexafluoroethane (C2F6) Emissions from Primary Aluminum Production | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 52.741(x)(1)(i) | 35 I.A.C. 215, Subpart Y | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.703(g)(9)(i) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-1(a)(1) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-18 | 1968 | Taxiway Guidance Sign System | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (10) Copper | APHA Method 3120 B | 1995 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Coast Guard | 33 CFR 154, Appendix B, 3.3.1 | ASME B&PV Code | 2005 | Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers |