This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Isopropyl ether) | ASTM D 3695 | 1995 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 147.1050(a)(7) | MDUIC regulations | 1989 | Code of Maryland Regulations, Title 26, Subtitle 01, Chapter 02, promulgated and effective as of March 1, 1989 | State of Maryland | |
Environmental Protection Agency | 40 CFR 52.741(u)(1)(i) | 35 I.A.C. 215, Subpart Y | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.860(e)(4) | ASTM D 4872 | 1988 | Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds | ASTM International | |
Coast Guard | 40 CFR 60.335(b)(4) | EPA Method 20 | 1986 | Source Assessment Sampling System (SASS) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.8(a) | ASTM D 4057 | 2012 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products | ASTM International | |
Coast Guard | 46 CFR 160.151-21(l) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Occupational Safety and Health Administration | 10 CFR 430.2, Definitions, BP incandescent reflector lamp (2) | ANSI C78.21 | 1989 | Electric Lamps--PAR and R Shapes | American National Standards Institute | |
National Archives and Records Administration | 36 CFR 1234.14(b)(3) | NAPM IT9.25 | 1998 | Imaging Materials--Optical Disc Media--Storage | Association for Information and Image Management | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0020 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Coast Guard | 46 CFR 120.340(i) | UL 486A | 1992 | Wire Connections and Soldering Lugs for Use With Copper Conductors | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 430 Subpart B, App. N, 7.0 | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 12.15-3(b)(1) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.85(b)(1) | Drawing No. LP 1049-1 through LP1049-13 | 1979 | 9-month old Dummy Components and Parts for Head-Neck | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.14(g)(12) | ASTM D 1475 | 2012 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 305R | 1989 | Hot Weather Concreting | American Concrete Institute | |
Minerals Management Service | 30 CFR 870.18(c) | ASTM D 5192 | 1991 | Standard Practice for Collection of Coal Samples from Core | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASME B&PV Code | 1988 | Boiler and Pressure Vessel Code, Section V | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 36 Appendix G G36.105(b) | IEC 561 | 1976 | Electro-acoustical Measuring Equipment for Aircraft Noise Certification | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (99) | EPA Method 610 (HPLC) | 1982 | Polynuclear Hydrocarbons by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | ASTM Annual Book of Standards | 1996 | Water and Environmental Technology--Section 11.01 | ASTM International | |
Environmental Protection Agency | 40 CFR 60.41c Distillate oil | ASTM D 975 | 2008 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 33 CFR 149.408(a) | NFPA 10 | 2010 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(9)(ii) | EPA-600-4-79-020 | 1983 | Method 245.2--Automated Cold Vapor Technique | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 89.6(a)(5) | ASTM D 445 | 2009 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(e)(35) | ASTM D 7430 | 2008 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (63) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 2 | EPA-600-R-94-111 | 1994 | Methods for the Determination of Metals in Environmental Samples—Supplement I | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 131.150(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 21 CFR 101.81(c)(2)(ii)(A) | AOAC Official Methods | 1995 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 49 CFR 195.3(c) E6 | ASTM A 672 | 2001 | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures | ASTM International | |
Coast Guard | 46 CFR 175.600(b) Table | ABS Publication | 1983 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 feet) in Length | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 571.225 S6.2.2(a)(1) | SAE J-1100 | 1993 | Motor Vehicle Dimensions | Society of Automotive Engineers | |
Energy Department | 10 CFR 430 Subpart B, App. B1, 2.4(c) | AHAM HRF-1 | 1979 | Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers | Association of Home Appliance Manufacturers | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(3)(vi) | ANSI B31.1.0a Addendum | 1969 | Code for Pressure Piping Addendum | American National Standards Institute | |
Labor Department | 41 CFR 50-204.2(a)(3) | 49 CFR 175 | 2014 | Carriage by Aircraft | U.S. Department of Transportation | |
Research and Special Programs Administration | 49 CFR 173.420(a)(1) | ANSI N14.1 | 1971 | Packaging of Uranium Hexafluoride for Transport | American National Standards Institute | |
Food and Drug Administration | 21 CFR 101.81(c)(2)(ii)(B)(2) | AOAC Publication | 1995 | Determination of Soluble and Insoluble Dietary Fiber in Psyllium-containing Cereal Products | AOAC International | |
Coast Guard | 46 CFR 56.95-10(c)(4) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 799.5085(j) Table 3, C2 | ASTM E 1218 | 2004 | Standard Guide for Conducting Static Toxicity Tests with Microalgae | ASTM International | |
Environmental Protection Agency | 40 CFR 98.244(b)(4)(vii) | ASTM D 5373 | 2002 | Standard Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke | ASTM International | |
Coast Guard | 46 CFR 116.423(a)(4) | ASTM E 662 | 1997 | Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials | ASTM International | |
Coast Guard | 46 CFR 160.156-7(b)(26) | Federal Standard 595C | 2008 | Colors Used in Government Procurement | General Services Administration | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (5) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(13)(i)(C) | AOAC Method 973.40 | 1998 | Specific conductance of water | AOAC International | |
Environmental Protection Agency | 40 CFR 63.1020 Note to In Light Liquid Service | ASTM D 2879 | 1996 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-15 | CGA G-4.1 | 1985 | Cleaning Equipment for Oxygen Service | Compressed Gas Association | |
National Highway Traffic Safety Administration | 49 CFR 572.133(c)(2) | Drawing No. 9000018 | 1987 | Jam Nut | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Dinoseb) | EPA Method 615 | 1993 | The Determination of Chlorinated Herbicides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 266.111(d)(2) | NFPA 30 | 1977 | Flammable and Combustible Liquids Code | National Fire Protection Association |