This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Rural Utilities Service | 7 CFR 1728.97(e)(6) | AWPA A7 | 2004 | Standard for Wet Ashing Procedures for Preparing Wood for Chemical Analysis | American Wood Protection Association | |
Energy Department | 10 CFR 431.19(c)(4) | CSA C390 | 1993 | Energy Efficiency Test Methods for Three-Phase Induction Motors, Test Method (1) | Canadian Standards Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 630.1 | 1993 | Dithiocarbamate Pesticides by GC/ELCD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 98.7(d)(4) | ASME MFC-6M | 1998 | Measurement of Fluid Flow in Pipes Using Vortex Flow Meters | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 172.723(b)(1) | AOCS Method Cd 9-57 | 1989 | Oxirane Oxygen | American Oil Chemists Society | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Ethanol) | EPA Method 1671 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Gas Chromatography/ Flame Ionization Detector | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2250(a)(2) | UTUIC regulations | 1990 | Underground Injection Control Regulations; Utah Administrative Code, Section R448-7 (effective as of January 2, 1990) | State of Utah | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 4, (2)(e) | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Labor Department | 41 CFR 50-204.2(a)(1) | 29 CFR 1910 | 2014 | General Industry Safety and Health Standards, Subparts C through S | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910.253(b)(1)(iii) | ANSI B57.1 | 1965 | Compressed Gas Cylinder Valve Outlet and Inlet Connections | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 761.71(b)(2)(vi) | ASTM D 3178 | 1984 | Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Coke and Coal | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASSE 1019 | 1978 | Performance Requirements for Wall Hydrants, Frost Proof Automatic Draining, Anti-Backflow Types | American Society of Sanitary Engineering | |
National Highway Traffic Safety Administration | 49 CFR 571.213 S5.4.1.2 | AATCC Publication | 2013 | Geometric Gray Scale | American Association of Textile Chemists and Colorists | |
Coast Guard | 21 CFR 184.1095(b) | Food Chemicals Codex | 1981 | Sulfuric Acid | National Academy Press | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.1 | 1998 | Cast Iron Pipe Flanges and Flanged Fittings, Classes 25, 125, 250 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (59) | EPA Method 267.2 | 1978 | Ruthenium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.11(j) | Drawing No. SA 150 M002 | 1996 | Hybrid II 50th Male Dummy (?) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 153.4(b) | ASTM F 1122 | 1992 | Standard Specification for Quick Disconnect Couplings | ASTM International | |
Environmental Protection Agency | 40 CFR 1048.105(a) | SAE J-2260 | 1996 | Non-metallic Fuel System Tubing with One or More Layers | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 6.4 | ASTM D 4017 | 1981 | Standard Test Method for Water in Paints and Paint Materials by the Karl Fischer Titration Method | ASTM International | |
Coast Guard | 33 CFR 127.1203(b) | 29 CFR 1910.1000, Z Tables | 2014 | Permissible Exposure Limits | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix E (3)(F) | Federal Test Method Standard 191, Method 5903 | 1971 | Textile Test Methods | Architectural Aluminum Manufacturers Association | |
Coast Guard | 46 CFR 160.151-33(c) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1066.310(b)(7)(i) | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Research and Special Programs Administration | 49 CFR 179.101-1 Table Note 6 | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Coast Guard | 46 CFR 56.01-2(d)(6) | ASME B16.4 | 1998 | Gray Iron Threaded Fittings, Classes 125 and 250 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63, Appendix A, Method 315, Section 7.1.1 | ASTM D 2986 | 1995 | Standard Practice for Evaluation of Air Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | EPA Method 300.0 | 1993 | Ion chromatography - anions, Revision 2.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 61.18(a)(14) | ASTM E 50 | 1990 | Standard Method Practice for Apparatus Reagents, and Safety Precautions for Chemical Analysis of Metals | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/SDI A123.1 | 1982 | Nomenclature for Steel Doors and Steel Door Frames | Steel Door Institute | |
Food and Drug Administration | 21 CFR 131.200(e)(3) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 60.58b(i)(6)(ii) | ASME PTC 4.1 | 1991 | Power Test Codes: Test Code for Steam Generating Units | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (23) Silica | APHA Method 3120 B | 1998 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.335(b)(10)(ii) | ASTM D 1072 | 1980 | Standard Test Method for Total Sulfur in Fuel Gases | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.137(j) | Drawing No. 880105-300 | 2000 | Upper Torso Assembly | Reprographic Technologies | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.3 | ASTM F 1487 | 2001 | Standard Consumer Safety Performance Specification for Playground Equipment for Public Use | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(11) | API MPMS | 2003 | Chapter 4, Section 2 | American Petroleum Institute | |
Coast Guard | 46 CFR 134.140(a)(1) | ABS Publication | 1994 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 572.125(a) | Drawing No. 127-8095 | 1994 | Cable | Reprographic Technologies | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM A 569/A 569M | 1991 | Standard Specification for Steel, Carbon (0.15 Maximum Percent), Hot-Rolled Sheet and Strip, Commercial Quality | ASTM International | |
Minerals Management Service | 30 CFR 250.1629(b)(1) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section I | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 184.1610(b) | Food Chemicals Codex | 1981 | Potassium Alginate | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1311(b) | Food Chemicals Codex | 1996 | Ferrous Lactate | National Academy Press | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(2) | SAE J-583 | 2004 | Front Fog Lamp | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (115) | ASTM D 7065 | 2006 | Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry | ASTM International | |
Rural Utilities Service | 7 CFR 1755.390(i)(3) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 80.46(h)(1)(xiii) | ASTM D 6550 | 2010 | Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(lxi) | APHA Method 6440 | 2000 | Polynuclear Aromatic Hydrocarbons | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.5085(h)(2) | ASTM E 1218 | 2004 | Standard Guide for Conducting Static Toxicity Tests with Microalgae | ASTM International |