This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(6) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D4160 | 1982 | Specification for Reinforced Thermosetting Resin Pipe (RTRP) Fittings for Nonpressure Applications (Withdrawn 1989) | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. A1, 2.6(c) | AHAM HRF-1 | 1979 | Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers | Association of Home Appliance Manufacturers | |
Environmental Protection Agency | 40 CFR 63.5850(e)(4)(i) | ASTM D6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(12) | ASTM D56 | 1970 | Test for Flash Point by Tag Closed Tester | ASTM International | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(ii) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(24) | SAE J-826 | 1987 | Devices for Use in Defining and Measuring Vehicle Seating Accommodation | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (42) | USGS O-3104-83 | 1983 | Whole-water recoverable organophosphate pesticides | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 147.1450(a)(6) | NVUIC regulations | 1987 | Nevada Administrative Code [NAC], Regulations and Rules of Practice and Procedure adopted Pursuant to NRS 522.010 through 522.625, Inclusive. July 22, 1987 (amending NAC Chapter 522). | State of Nevada | |
Environmental Protection Agency | 40 CFR 60 Subpart LLLL, Table 1, Mercury | ASTM D6784 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (47) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D3972 | 2002 | Standard Test Method for Isotopic Uranium in Water by Radiochemistry | ASTM International | |
Federal Aviation Administration | 14 CFR 135.168(F)(1)(ii) | TSO-C126a | 2008 | 406 MHz Emergency Locator Transmitter (ELT) | U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.176-8(c)(2)(ii) | FAA TSO-C13d | 1983 | Federal Aviation Administration Standard for Life Preservers | Federal Aviation Administration, U.S. Department of Transportation | |
Research and Special Programs Administration | 49 CFR 173.120(c)(1)(ii)(B) | ASTM D3278 | 1995 | Standard Test Method for Flash Point of Liquids by Setaflash Closed-Cup Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 300.915(a)(9)(i)(C) | ASTM D93 | 1990 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(j)(3)(i) | 35 I.A.C. 215, Subpart R | 1989 | Section 215.446 | State of Illinois | |
Coast Guard | 46 CFR 53.05-5 | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 28, Section 16.1.1 | ASTM D4442 | 1984 | Standard Test Method for Direct Moisture Content Measurement of Wood and Wood-Based Materials | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.106 S12.7(b) | ASTM G151 | 1997 | Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources | ASTM International | |
Coast Guard | 46 CFR 160.077-23(h)(6) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7760 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 136.3(a) Table IF (Acetonitrile) | ASTM D3371 | 1995 | Standard Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 61.04(c)(1)(i) | NH State Regulations, Env-Sw 2100 | 2010 | Management and Control of Asbestos Disposal Sites Not Operated after July 9, 1981, (including a letter from Commissioner, Department of Environmental Services, State of New Hampshire, dated February 12, 2010, Env-Sw 2100) | State of New Hampshire | |
Food and Drug Administration | 21 CFR 172.864(b)(3) Footnote 1 | NBS Circular 484 | 1949 | Spectrophotometry | National Institute of Standards and Technology, U.S. Department of Commerce | |
Public Health Service | 42 CFR 37.51(e) | AAPM On-Line Report No. 03 | 2005 | Assessment of Display Performance for Medical Imaging Systems | American Association of Physicists in Medicine | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 42 | EPA Method 1664 | 2010 | n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT–HEM; Non-polar Material) by Extraction and Gravimetry, Revision B | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F E | 1995 | Fluoride by Complexone Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | EPA Method 239.1 | 1971 | Lead (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.84(c) | ASTM C114 | 2009 | Standard Test Methods for Chemical Analysis of Hydraulic Cement | ASTM International | |
Environmental Protection Agency | 40 CFR 1043.1(d) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(R) | EPA Method 633.1 | 1993 | Neutral Nitrogen Containing Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 4, (3)(d) | ASTM D6522 | 2005 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 30.1(c) | BATF Publication 5110.6 | 1978 | Gauging Manual Embracing Instructions and Tables for Determining Quantity of Distilled Spirits by Proof and Weight | Bureau of Alcohol, Tobacco, Firearms and Explosives, U.S. Department of the Treasury | |
National Archives and Records Administration | 36 CFR 1238.10(b) | AIIM MS5 | 1998 | Microfiche | Association for Information and Image Management | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (7) | ASTM D4382 | 2002 | Barium by Graphite Furnace Atomic Absorption | ASTM International | |
Rural Utilities Service | 7 CFR 1724.52(a)(2) | EEI Publication | 1996 | Suggested Practices for Raptor Protection on Power Lines: The State of the Art in 1996 | Edison Electric Institute | |
Food and Drug Administration | 21 CFR 175.300(b)(3)(xxix) | ASTM D1243 | 1979 | Standard Methods of Test for Dilute Solution Viscosity of Vinyl Chloride Polymers | ASTM International | |
Coast Guard | 46 CFR 58.60-7 | ANSI B31.3 | 1987 | Chemical Plant and Petroleum Refinery Piping | American National Standards Institute | |
Minerals Management Service | 30 CFR 250.901(d)(11) | ASTM C595 | 2008 | Blended Hydraulic Cements | ASTM International | |
Coast Guard | 46 CFR 111.60-5(a)(2) | IEC 92-353 | 1995 | Electrical Installations in Ships—Part 353: Single and Multicore Non-Radial Field Power Cables with Extruded Solid Insulation for Rated Voltages 1kV and 3kV, Second Edition | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.6.11.1.1 | ASTM B117 | 1979 | Standard Method of Salt Spray (Fog) Testing | ASTM International | |
Rural Utilities Service | 7 CFR 1755.901(d)(5) | ASTM D4568 | 1999 | Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Wire and Cable Materials | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.911 | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(79) | ANSI Z89.2 | 1971 | Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B | American National Standards Institute | |
Energy Department | 10 CFR 440 Appendix A | ASTM C208 | 1982 | Insulating Board (Cellulosic Fiber), Structural and Decorative | ASTM International | |
Rural Utilities Service | 7 CFR 1728.202(d)(3) | AWPA P8 | 2008 | Standard for Oil-Borne Preservatives | American Wood Protection Association | |
Coast Guard | 46 CFR 78.45-1(a)(2) | IMO Resolution A.654(16) | 1989 | Graphical Symbols for Fire Control Plans | International Maritime Organization | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-10C | 1971 | Specification for L-828 Constant Current Regulators | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 35.10-3(a) | IMO Resolution A.654(16) | 1989 | Graphical Symbols for Fire Control Plans | International Maritime Organization |