This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 49 CFR 572.33(b) | Drawing No. 78051-303 | 1987 | Title not specified | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (63) | EPA Method 505 | 1995 | Analysis of Organohalide Pesticides and Commercial Polychlorinated Biphenyl (PCB) Products in Water by Microextraction and Gas Chromatography - Revision 2.1 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.6(i)(5) | AWS D2.0 | 1969 | Specifications for Welding Highway and Railway Bridges | American Welding Society | |
Food and Drug Administration | 21 CFR 177.1040(c) Footnote 1 | FDA Publication | 2004 | Procedure for the Determination of Molecular Weights of Acrylonitrile/Styrene Copolymers | Food and Drug Administration, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1926.1440(c)(7) | ASME B30.14, Section 14-1.7.4 | 2004 | Side Boom Tractors, General Requirements—Welded Construction | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (72) | EPA Method 1613 B | 1997 | Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution GC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(c)(1)(i) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.485a(g)(6) | ASTM D 2382 | 1988 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Coast Guard | 46 CFR 164.015-1(a)(2) | FedSpec C-C-91D | 1983 | Candle, Illuminating | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (18) Nitrate | APHA Method 4500-NO3 E | 1995 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(f)(10) | ASME MFC-16 | 2007 | Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 154.106(d)(1) | ASTM F 631 | 1993 | Standard Guide for Collecting Skimmer Performance Data in Controlled Environments | ASTM International | |
Rural Utilities Service | 7 CFR 1755.505(c) | 7 CFR 1755.200 | 2012 | Splicing copper and fiber optic cables | Rural Utilities Service, U.S. Department of Agriculture | |
Rural Utilities Service | 7 CFR 1755.870(h)(6)(i) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.115(k)(3) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
National Highway Traffic Safety Administration | 49 CFR 572.120(a)(1)(i) | Drawing No. 127-1000 | 2009 | Drawings and Specifications for the Hybrid III 6-year-old Dummy, Head Assembly | Reprographic Technologies | |
Coast Guard | 46 CFR 160.176-8(b)(1)(ii) | UL 1191 | 1995 | Standard for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 21 CFR 118.8(a) | FDA Publication | 2008 | Environmental Sampling and Detection of Salmonella in Poultry Houses | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 268.44(o), Table Footnote 4 | EPA Method 9012B | 2004 | Total and Amenable Cyanide (Automated Colorimetric, with Off-Line Distillation) | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.86(a)(6) | FMVSS 223 | 1998 | Rear Impact Guards | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 56.25-7 | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 50 | USGS Open File Report (OFR) 98-165 | 1988 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Elements in Whole-water Digests Using Inductively Coupled Plasma-Optical Emission Spectrometry and Inductively Coupled Plasma-Mass Spectrometry | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 98.354(d)(5) | ASTM D 5614 | 2008 | Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs | ASTM International | |
Food and Drug Administration | 21 CFR 177.2450(b)(3) | FDA Publication | 1996 | Amide-Imide Polymer Content--Analysis of Monomer Content | Food and Drug Administration, U.S. Department of Health and Human Services | |
Federal Trade Commission | 16 CFR 460.5(e)(1)(ii) | ASTM C 518 | 2004 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | ASTM International | |
Coast Guard | 46 CFR 160.151-21(o) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.710 Table 1 | ASTM D 2699 | 2013 | Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 553 | 1992 | Determination of Benzidines and Nitrogen-Containing Pesticides in Water by Liquid-Liquid Extraction or Liquid-Solid Extraction and Reverse Phase High Performance Liquid Chromatography/Particle Beam/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b) Appendix (1) | EPA-600-4-79-020 | 1979 | Methods for Chemical Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(4)(i) | ASME B&PV Code | 1969 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 177.1520(b) | ASTM D 3835 | 1983 | Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Dichlorvos) | EPA Method 525.1 | 1988 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2550(a)(4) | WYUIC regulations | 1980 | Water Quality Rules and Regulations, Wyoming Department of Environmental Quality, Chapter IX: Wyoming Groundwater Pollution Control Permit (certified copy, signed April 9, 1980) | State of Wyoming | |
Environmental Protection Agency | 40 CFR 63.772(e)(3)(iv)(C)(1) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(7)(ii) | EPA-600-4-79-020 | 1983 | Method 335.2 Tritrimetric: Spectrophotometric | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200.935(d)(4)(ii)(A)(5) | ASQ Q9004-1 | 1994 | Quality Management and Quality Systems Elements-Guidelines | American Society for Quality Control | |
Coast Guard | 46 CFR 56.01-2(e)(51) | ASTM B 88 | 1996 | Standard Specification for Seamless Copper Water Tube | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.944(a)(1) | NIST PS 1 | 1983 | Product Standard for Construction and Industrial Plywood with Typical APA Trademarks | National Institute of Standards and Technology, U.S. Department of Commerce | |
Federal Motor Carrier Safety Administration | 49 CFR 393.104(e)(4) | WRTB Publication | 1985 | Wire Rope Users Manual, 2nd Edition | Wire Rope Technical Board | |
Environmental Protection Agency | 40 CFR 435.11(i) | ASTM D 975 | 1991 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Energy Department | 10 CFR 434.301.1.1 Table 301.1 Note | ASHRAE 90.1 | 1989 | Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings with addenda (RS-1) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Interior Department | 43 CFR 11.36(b)(1) | DOI NRDAM/GLE | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments, Technical Documentation | U.S. Department of the Interior | |
Research and Special Programs Administration | 45 CFR 162.1202(b)(2)(ii) | ASC X12N 270/271 | 2008 | Health Care Eligibility Benefit Inquiry and Response, Version 4010 | Washington Publishing Company | |
Coast Guard | 33 CFR 142.30(b) | ANSI Z89.1 | 1981 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 270.6(b)(1) | EPA-450-2-81-005 | 1981 | Air Pollution Training Institute Course 415: Control of Gaseous Emissions | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(17) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Coast Guard | 46 CFR 125.180(b) | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.113(a)(3) | Drawing No. 78051-307 | 1987 | Neck Bracket | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 60.685(c)(3)(i) | ASTM D 2584 | 1968 | Standard Test Method for Ignition Loss of Cured Reinforced Resins | ASTM International | |
Food and Drug Administration | 21 CFR 184.1304(b) | Food Chemicals Codex | 1981 | Ferric Pyrophosphate | National Academy Press |