Environmental Protection Agency |
|
40 CFR 60.105a(b)(2)(ii) |
ANSI/ASME PTC 19.10-1981 |
1981 |
Flue and Exhaust Gas Analyses
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 265.1035(b)(4)(iii) |
EPA-450-2-81-005 |
1981 |
Air Pollution Training Institute Course 415: Control of Gaseous Emissions
|
U.S. Environmental Protection Agency |
Federal Energy Regulatory Commission |
|
18 CFR 284.12(a)(1)(iv) |
NAESB Publication |
2006 |
Invoicing Related Standards
|
North American Energy Standards Board |
Federal Highway Administration |
|
23 CFR 650.211(b) |
AASHTO Publication |
1991 |
Model Drainage Manual
|
American Association of State Highway and Transportation Officials |
Research and Special Programs Administration |
|
49 CFR 173.120(c)(1)(i)(A) |
ASTM D56 |
1993 |
Standard Test Method for Flash Point by Tag Closed Cup Tester
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID Footnote 3 |
EPA Publication |
1978 |
Methods for Benzidine, Chlorinated Organic Compounds, Pentachlorophenol and Pesticides in Water and Wastewater
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 60.664(e)(4) |
ASTM D1946 |
1977 |
Standard Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(13) |
NFPA 59 |
1968 |
Standard for the Storage and Handling of Liquefied Petroleum Gases at Utility Gas Plants
|
National Fire Protection Association |
Coast Guard |
|
46 CFR 160.002-4(h) |
Federal Standard 751 |
1965 |
Stitches, Seams, and Stitchings
|
Federal Specifications Standards and Test Methods |
National Highway Traffic Safety Administration |
|
49 CFR 572.155(e) |
Part No. 921022-000 |
2001 |
Parts List and Drawings, Subpart R, CRABI 12-Month-Old Infant Crash Test Dummy (CRABI-12, Alpha version)
|
Reprographic Technologies |
Coast Guard |
|
46 CFR 160.055-1(a)(4) |
ASTM D882 |
1997 |
Standard Test Method for Tensile Properties of Thin Plastic Sheeting
|
ASTM International |
Federal Communications Commission |
|
47 CFR 15.123(b)(3) |
SCTE 54 (formerly DVS 241) |
2003 |
Digital Video Service Multiplex and Transport System Standard for Cable Television
|
Society of Cable Telecommunications Engineers |
Rural Utilities Service |
|
7 CFR 1755.890(k)(4)(i) |
ICEA S-84-608 |
1988 |
Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements
|
Insulated Cable Engineers Association |
Energy Department |
|
10 CFR 430 Subpart B, App. J1, 2.6.4.5.2 |
AATCC 79 |
2000 |
Absorbency of Bleached Textiles
|
American Association of Textile Chemists and Colorists |
Food and Drug Administration |
|
21 CFR 177.1390(c)(3)(i)(B)(2) |
FDA Publication |
2005 |
Determination of Non-Volative Chloroform Soluble Residues in Retort Pouch Water Extractives
|
Food and Drug Administration, U.S. Department of Health and Human Services |
Federal Railroad Administration |
|
49 CFR 237 Appendix A 5(b) |
AREMA Manual |
2005 |
Manual for Railway Engineering
|
American Railway Engineering and Maintenance of Way Association |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (28) |
APHA Method 6410 B |
2000 |
Base/Neutral and Acid Extractable Compounds by GC/MS
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 143.4(b) Table (Iron) |
APHA Method 3111 B |
1999 |
APHA Standards On-line, Metals by Flame Atomic Absorption
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 799.5085(h)(2) |
ASTM E729 |
1996 |
Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 244(b)(4)(vi) |
ASTM D5291 |
2007 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (27) |
APHA Method 6200 B |
1997 |
Volatile Organic Compounds by Purge and Trap GC/MS
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 141.24(e)(1) Table (Pentachlorophenol) |
EPA Method 515.2 |
1995 |
Chlorinated acids Liquid/Solid and GC/ECD
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 63.1450(a)(1)(v) |
ASTM D4536 |
1996 |
Standard Test Method for High-Volume Sampling for Solid Particulate Matter and Determination of Particulate Emissions
|
American Society for Microbiology |
Energy Department |
|
10 CFR 433.4(a)(1)(i) |
ASHRAE 90.1 |
2004 |
Energy Standard for Buildings Except Low-Rise Residential Buildings
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
Alcohol, Tobacco, Firearms, and Explosives Bureau |
|
27 CFR 21.114(a) |
ASTM D3699 |
1978 |
Standard Specification for Kerosine
|
ASTM International |
National Archives and Records Administration |
|
36 CFR 1238.5(c)(4) |
AIIM MS19 |
1993 |
Standard Recommended Practice--Identification of Microforms
|
Association for Information and Image Management |
National Highway Traffic Safety Administration |
|
49 CFR 572.91(a)(1) |
Drawing No. 126-0022 |
1992 |
Construction of the Newborn Infant Dummy
|
Reprographic Technologies |
National Oceanic and Atmospheric Administration |
|
50 CFR 226.205 |
USGS Paper 2294 |
1987 |
Hydrologic Unit Maps, Water Supply
|
U.S. Geological Survey |
Environmental Protection Agency |
|
40 CFR 265.190(a) |
EPA SW-846 |
1996 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 300.915(b)(8) |
ASTM D3278 |
1978 |
Standard Test Methods for Flash Point of Liquids by Setaflash Closed-Cup Apparatus
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60.17(g)(129) |
ASTM D3270 |
1973 |
Standard Test Method for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
|
ASTM International |
Federal Motor Carrier Safety Administration |
|
49 CFR 393.55(c)(1) |
FMVSS 121 |
1998 |
Air Brake Systems
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
Housing and Urban Development Department |
|
24 CFR 200.948(a)(2) |
ASTM D1667 |
1990 |
Standard Specification for Flexible Cellular Materials--Vinyl Chloride Polymers and Copolymers (Closed-cell Foam)
|
ASTM International |
Coast Guard |
|
45 CFR 162.920(c)(3)(v) |
CAQH Publication |
2011 |
Phase II CORE 270: Connectivity Rule, version 2.2.0
|
Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) |
Minerals Management Service |
|
30 CFR 250.806(a)(3) |
API Spec. 6A |
2009 |
Specification for Wellhead and Christmas Tree Equipment
|
American Petroleum Institute |
Coast Guard |
|
46 CFR 111.60-3(a)(2) |
IEC 92-353 |
1995 |
Electrical Installations in Ships—Part 353: Single and Multicore Non-Radial Field Power Cables with Extruded Solid Insulation for Rated Voltages 1kV and 3kV, Second Edition
|
International Electrotechnical Commission |
National Highway Traffic Safety Administration |
|
49 CFR 571.106 S5.3.9 |
SAE J-1703 |
1995 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 1(a) |
ASTM D6323 |
1998 |
Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities
|
ASTM International |
Energy Department |
|
10 CFR 430 Subpart B, App. P, 3 |
ANSI Z21.56 |
1994 |
Gas-Fired Pool Heaters
|
American National Standards Institute |
Coast Guard |
|
46 CFR 164.120-5(d)(5) |
ISO 604:2002(E) |
2002 |
Plastics—Determination of compressive properties, Third Edition
|
International Organization for Standardization |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (33) |
EPA Method 200.7 |
1994 |
ICP - metals, Revision 4.4
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (7) Cadmium |
APHA Method 3113 B |
1999 |
Metals by Graphite Furnace Atomic Absorption
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 63.7575 Biodiesel |
ASTM D6751 |
2011 |
Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
|
ASTM International |
National Highway Traffic Safety Administration |
|
49 CFR 572.180(a)(2)(xi) |
Drawing No. 175-7000-1 |
2009 |
Leg Assembly, left
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
Environmental Protection Agency |
|
40 CFR 136.3(b)(3)(ii)(E) |
EPA Method 245.1 |
1994 |
Determination of Mercury in Water by Cold Vapor Atomic Absorption Spectrometry. Revision 3.0
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 60.45(f)(5)(i) |
ASTM D1137 |
1953 |
Standard Method for Analysis of Natural Gases and Related Types of Gaseous Mixtures by the Mass Spectrometer
|
ASTM International |
Consumer Product Safety Commission |
|
16 CFR 1216.2 |
ASTM F977 |
2012 |
Standard Consumer Safety Specification for Infant Walkers
|
ASTM International |
Food and Drug Administration |
|
21 CFR 161.173(c)(1) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
Coast Guard |
|
46 CFR 160.055-1(a)(3) |
Federal Standard 191 |
1978 |
Textile Test Methods
|
Federal Specifications Standards and Test Methods |
Research and Special Programs Administration |
|
49 CFR 178.337-9(b)(8) |
CI Pamphlet 166 |
2002 |
Section 3, Angle Valve Guidelines for Chlorine Bulk Transportation
|
Chlorine Institute, Inc. |