This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 197.336(a) | ANSI B31.1 | 2013 | Code for Pressure Piping | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 55.14(d)(16)(i) | 40 CFR part 52, subpart HH | 2007 | State of New York Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.6(v)(1) | ANSI K61.1 | 1972 | Standard for the Storage and Handling of Anhydrous Ammonia | American National Standards Institute | |
Energy Department | 10 CFR 431.66(d)(3) | ARI 1200 | 2006 | Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets | Air Conditioning and Refrigeration Institute | |
Energy Department | 10 CFR 434.701.1 RS-40 | AHAM RAC-1 | 1992 | Room Air Conditioners (RS-40) | Association of Home Appliance Manufacturers | |
Mine Safety and Health Administration | 30 CFR 70.204(e) | MSHA Informational Report IR 1240 | 1996 | Calibration and Maintenance Procedures for Coal Mine Respirable Dust Samplers | Mine Safety and Health Administration, U.S. Department of Labor | |
Coast Guard | 27 CFR 21.65(b)(1) 243 | The United States Pharmacopoeia | 1980 | Formula No. 38-B | U.S. Pharmacopeial Convention | |
Food and Drug Administration | 21 CFR 177.1050(c)(2) | FDA Publication | 1995 | Molecular Weight of Matrix Copolymer by Solution Viscosity | Food and Drug Administration, U.S. Department of Health and Human Services | |
Energy Department | 10 CFR 430 Subpart B, App. M, 2.2, a | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 161.006-4(k) | NSSC 43B11 | 2012 | Bolts, nuts, studs, and tap-rivets | Navy Supply Systems Command | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I)(3)(ii) | EPA-600-R-95-131 | 1993 | Method 552.2--Determination of Haloacetic Acids and dalapon in Drinking Water by Liquid-Liquid Extraction, Derivatization and Gas Chromatography with Electron-Capture Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(b)(1)(i) | AFPC Book of Methods | 1991 | Section IX, Methods of Analysis for Phosphate Rock, No. 1 Preparation of Sample | Association of Florida Phosphate Chemists | |
Environmental Protection Agency | 40 CFR 60.17(g)(181) | ASTM D 6366 | 1999 | Standard Test Method for Total Trace Nitrogen and Its Derivatives in Liquid Aromatic Hydrocarbons by Oxidative Combustion and Electrochemical Detection | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (50) | EPA Method 365.3 | 1978 | Phosphorus, All Forms (Colorimetric, Ascorbic Acid, Two Reagent) | U.S. Environmental Protection Agency | |
Federal Railroad Administration | 49 CFR 238.311(a) | APTA SS-M-005 | 1998 | Code of Tests for Passenger Car Equipment Using Single Car Testing Device | American Public Transit Association | |
Housing and Urban Development Department | 24 CFR 3280.607(b)(3)(iii) | ANSI Z97.1 | 1984 | Safety Performance Specifications and Methods of Test for Safety Glazing Materials Used in Buildings | American National Standards Institute | |
Energy Department | 10 CFR 431.18(b) | NIST Handbook 150 | 1994 | Program Procedures and General Requirementsns | National Institute of Standards and Technology, National Voluntary Laboratory Accreditation Program | |
Environmental Protection Agency | 40 CFR 1065.267(b) | SAE J-1151 | 2011 | Methane Measurement Using Gas Chromatography | Society of Automotive Engineers | |
Research and Special Programs Administration | 10 CFR 440 Appendix A | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID Footnote 10 | EPA Method 525.1 | 1988 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(k)(2) | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.177(d)(1)(ii) | ASTM D 4814 | 2013 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
Coast Guard | 46 CFR 160.076-37(b) | UL 1180 | 2009 | Fully Inflatable Recreational Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Tetrahydrofuran) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.052-5(b) | Drawing No. 160.052-1, Sheet 1 | 2012 | Buoyant Vest, Unicellular Plastic Foam, Adult and Child, Cutting Pattern and General Arrangement, Model AP | U.S. Coast Guard | |
Environmental Protection Agency | 40 CFR 147.2800(a)(2) | NMIUIC regulations | 1984 | CNMI Coastal Resources Management Act, 2 CMC sections 1501, et seq. | Commonwealth of the Northern Mariana Islands | |
Environmental Protection Agency | 40 CFR 63.5758(c) | ASTM D 1475 | 1990 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Environmental Protection Agency | 40 CFR 62.14104(b) | ASME PTC 4.1 | 1964 | Power Test Codes: Test Code for Steam Generating Units (with 1968 and 1969 Addenda) | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 156.330(c) | ICS Publication | 1989 | Guide to Helicopter/Ship Operations | International Chamber of Shipping | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F 1199 | 1993 | Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150 Degrees F Maximum) | ASTM International | |
Rural Utilities Service | 7 CFR 1755.903(c)(3) | ICEA S-110-717 | 2003 | Standard for Optical Drop Cable | Insulated Cable Engineers Association | |
Food and Drug Administration | 21 CFR 189.155(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Federal Railroad Administration | 49 CFR 238.230(c)(2) | APTA SS-C&S-020-03 | 2003 | Standard for Passenger Rail Vehicle Structural Repair | American Public Transit Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.917(e)(1) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(27) | NFPA 251 | 1969 | Standard Methods of Fire Tests of Building Construction and Materials | National Fire Protection Association | |
Coast Guard | 40 CFR 136.3(a) Table IB Footnote 52 | EPA Method 300.1-1 | 1994 | Methods for the Determination of Metals in Environmental Samples, Supplement I, EPA/600/R-94/111 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(b)(1) Table | ASTM D 6581 | 2000 | Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.97(a)(3)(ii) | ANSI Z535.1 | 2011 | Safety colors | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.100(b)(2) | NHTSA Publication | 1995 | Free Motion Head Form User's Manual, Version 2 | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (103) | EPA Method 1613 B | 1997 | Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution GC/HRMS | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.902(r)(14) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(ii) | ASTM D 4084 | 2005 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.268(s)(1)(v) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.269(u)(1) Note (3) | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (65) | APHA Method 4500-SO4(2-) E | 1997 | Sulfate, Turbidimetric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 18 | LI QuikChem Method 10-204-00-1-X | 2000 | Digestion and Distillation of Total Cyanide in Drinking and Wastewaters using MICRO DIST and Determination of Cyanide by Flow Injection Analysis, Revision 2.1 | Lachat Instruments | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.301b(c)(2)(ii) | ISO 11117 | 1998 | Gas cylinders--Valve protection caps and valve guards for industrial and medical gas cylinders--Design, construction and tests | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(3) | EPA Method 200.7 | 1987 | Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(c)(3) | API RP 2SM | 2001 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
Coast Guard | 46 CFR 56.01-2(e)(23) | ASTM A 307 | 1997 | Carbon Steel Bolts and Studs, 60,000 PSI Tensile Strength | ASTM International |