This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 98.324(d)(1) | ASTM D 1945 | 2003 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 58.03-1(g)(4) | ASTM B 127 | 1993 | Standard Specification for Nickel-Copper Alloy (UNS NO4400) Plate, Sheet, and Strip | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (41) | ASTM D 3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 147.2600(a)(3) | GUUIC regulations | 1982 | Guam Environmental Protection Agency, Underground Injection Control Regulations, Chapters 1-9, as revised by amendments adopted September 24, 1982 | Guam Territory | |
Consumer Product Safety Commission | 16 CFR 1211.8(d) | UL 1998 | 1998 | Software in Programmable Components | Underwriters Laboratories, Inc. | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 28.345(b) | ABYC E-1 | 1972 | Bonding of Direct Current Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 60.17(g)(151) | ASTM D 4177 | 2000 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(j)(4) | ASTM D 93 | 1969 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Veterans Affairs Department | 38 CFR 17.63(a)(2) | NFPA 101A | 2010 | Guide to Alternative Approaches to Life Safety | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(33) | SAE J-941 | 1965 | Passenger Car Driver's Eye Range | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 7500-Ra D | 2011 | Radium - Sequential Precipitation Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1) | ASTM D 4057 | 2000 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(3)(vi) | ASME OM Code | 1999 | Code for Operation and Maintenance of Nuclear Power Plants, ISTC-3540 of the 1999 Addenda through the latest edition and addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(i) Note to paragraph (c)(2)(i) | ASTM F 1236 | 2012 | Standard Guide for Visual Inspection of Electrical Protective Rubber Products | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (44) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 | ASTM D 2015 | 1977 | Standard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 35 | 2005 | Manufacture of Organic Coatings | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 178.3740(b) | ASTM D 2161 | 1982 | Standard Method of Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity | ASTM International | |
Coast Guard | 46 CFR 177.410(a) | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(u)(1)(i) | 35 I.A.C. 215, Subpart V | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.860(c)(3) | ASTM D 1535 | 1989 | Specifying Color by the Munsell System | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(8)(vi) | EPA Method 1604 | 2002 | Total Coliforms and Escherichia coli (E. coli) in Water by Membrane Filtration Using a Simultaneous Detection Technique (MI Medium) on DC | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-21 | 1964 | Specification for L-813 Static Indoor Type Constant Current Regulator Assembly; 4 KW and 7\1/2\ KW; for Remote Operation of Taxiway Lights | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F B | 1998 | Fluoride Distillation | American Public Health Association | |
Consumer Product Safety Commission | 16 CFR 1211.8(d) | UL 1998 | 1998 | Software in Programmable Components | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0018 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Coast Guard | 40 CFR 136.3(a) Table IB (35) | EPA Method 245.7 | 2005 | Mercury in Water by Cold Vapor Atomic Fluorescence Spectrometry, EPA-821-R-05-001, Revision 2.0 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.021-1(a)(1) | NIST Publication 440 | 1976 | Color: Universal Language and Dictionary of Names | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 59.213(b)(2) | ASTM E 380 | 1993 | Standard Practice for Use of the SI International System of Units | ASTM International | |
Coast Guard | 46 CFR 39.2009(a)(1)(iii)(A) | NEMA Publication WD-6 | 1988 | Wiring Devices, Dimensional Requirements | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 30.10-27 Table 30.10-27 | ASTM D 56 | 2013 | Standard Test Method for Flash Point by Tag Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (40) | AOAC Method 993.30 | 1998 | Nitrite (as N), mg/L | AOAC International | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(E) | EPA Method 615 | 1993 | Chlorinated Herbicides by Liquid/Liquid Extraction, Derivitization and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | EPA Method 200.8 | 1994 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(e)(2) | ISO 15765-4:2005(E) | 2005 | Road Vehicles—Diagnostics on Controller Area Networks (CAN)—Part 4: Requirements for emissions-related systems | International Organization for Standardization | |
Coast Guard | 46 CFR 58.60-9 | API RP 14C | 1986 | Analysis, Design, Installation and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 46 CFR 160.135-11(c)(2)(ii) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Environmental Protection Agency | 40 CFR 1043.100(a)(1)(i) | IMO Publication | 2008 | Revised MARPOL Annex VI, Regulations for the Prevention of Pollution from Ships (2008 Annex VI) | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 147.750(a)(3) | INUIC regulations | 1991 | Indiana Administrative Code, title 310, article 7, rules 1 through 3 (Cumm. Supp. 1991) | State of Indiana | |
Environmental Protection Agency | 40 CFR 63.404(a) | EPA SW-846 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75, Appendix A, Section 2.1.1.1(c) | ASTM D 1552 | 2001 | Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) | ASTM International | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 816.49(a)(4)(i) | USDA Technical Release 210-VI-TR60 | 1985 | Earth Dams and Reservoirs | Soil Conservation Service, U.S. Department of Agriculture | |
Occupational Safety and Health Administration | 29 CFR 1917.119(c) | ANSI A14.5 | 1992 | Safety Requirements for Portable Reinforced Plastic Ladders | American National Standards Institute | |
Coast Guard | 46 CFR 170.165(a) | IMO Resolution MSC 267(85) | 2008 | Adoption of the International Code on Intact Stability, 2008 (2008 IS Code) | International Maritime Organization | |
Research and Special Programs Administration | 49 CFR 195.3(c) E7 | ASTM A 691 | 2002 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperature | ASTM International | |
Coast Guard | 46 CFR 160.077-19(d)(2) | ASTM D 751 | 1995 | Standard Test Methods for Coated Fabrics | ASTM International | |
Environmental Protection Agency | 40 CFR 600.113-12(f)(4)(ii)(A) SGE | ASTM D 1289 | 2012 | Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (70) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
National Highway Traffic Safety Administration | 24 CFR 3280.403(e)(2) | AAMA 1701.2 | 1995 | Primary Window and Sliding Glass Door Voluntary Standard for Utilization in Manufactured Housing | American Architectural Manufacturers Association |