This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 40 CFR 60.485(e)(1) | ASTM D2879 | 1996 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Environmental Protection Agency | 40 CFR 266, Appendix IX, 5.0 | EPA-450-4-88-010 | 1992 | Screening Procedures for Estimating the Air Quality Impact of Stationary Sources | U.S. Environmental Protection Agency | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.110 | ASTM D439 | 1979 | Specification for Automotive Gasoline | ASTM International | |
Veterans Affairs Department | 38 CFR 17.1(b)(3) | NFPA 101A | 2010 | Guide to Alternative Approaches to Life Safety | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0021 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 571.106 S10.7 | ASTM D471 | 1998 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(a) | ASTM D4057 | 2006 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Coast Guard | 33 CFR 183.516(a)(1)(ii) | ASTM D471 | 1996 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(22) | ASTM D2713 | 2013 | Standard Test Method for Dryness of Propane (Valve Freeze Method) | ASTM International | |
Coast Guard | 46 CFR 162.018-7(a) | ASME B&PV Code | 1980 | Boiler and Pressure Vessel Code, Section VIII, UG-131 | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.70-15(g)(2) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (71) | ASTM D5673 | 2005 | Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA Method 552.3 | 2003 | Determination of Haloacetic Acids and Dalapon in Drinking Water by Liquid-Liquid Microextraction, Derivitization, and Gas Chromatography With Electron Capture Detection | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME B16.26 | 1988 | Cast Copper Alloy Fittings for Flared Copper Tubes | American Society of Mechanical Engineers | |
Minerals Management Service | 30 CFR 250.806(a)(3) | API 6A V1 | 2003 | Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | American Petroleum Institute | |
Coast Guard | 46 CFR 12.05-3(b)(2) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 60.593(b)(2) | ASTM E168 | 1977 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
Coast Guard | 33 CFR 127.003(b) | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 160.156-7(b)(6) | IMO MSC/Circular 980 | 2001 | Standardized Life-saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (12) | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption, Revision 2.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xlii) | ASTM D3590 | 2006 | Standard Test Methods for Total Kjeldahl Nitrogen in Water | ASTM International | |
Research and Special Programs Administration | 49 CFR 178.337-9(b)(8) | CI Drawing No. 104-8 | 1993 | Standard Chlorine Angle Valve Assembly | Chlorine Institute, Inc. | |
Coast Guard | 33 CFR 164.74(a)(3)(ii) | CIA 3 | 1980 | Standard Test Methods for Fiber Rope Including Standard Terminations | Cordage Institute | |
Environmental Protection Agency | 40 CFR 55.14(e)(17)(i)(A) | 40 CFR part 52, subpart II. | 1992 | State of North Carolina Air Pollution Control Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 161.145(c)(3) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 160.052-1(a)(3) | Federal Standard 751A | 1977 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Nuclear Regulatory Commission | 10 CFR 73 App. B, IV C note 2 | NRA Publication | 1976 | NRA Target Manufacturers Index | National Rifle Association | |
Environmental Protection Agency | 40 CFR 799.9120(f)(7) | OECD No. 402 | 1987 | Guidelines for Testing of Chemicals, Acute Dermal Toxicity | Organization for Economic Cooperation and Development | |
Federal Highway Administration | 23 CFR 625.4(d)(1)(i) | AASHTO GDHS-7 | 2011 | A Policy on Geometric Design of Highways and Streets | American Association of State Highway and Transportation Officials | |
Rural Utilities Service | 7 CFR 1755.860(j)(3)(v) | ASTM D1248 | 1989 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 60.111a(g) Reid vapor pressure | ASTM D323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(6) | CGA P-1 | 1965 | Safe Handling of Compressed Gases | Compressed Gas Association | |
Coast Guard | 46 CFR 154.1(b) | IMO Publication | 1976 | Code For Existing Ships Carrying Liquefied Gases in Bulk | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.146(e) | Part No. 210-0000 | 2001 | Parts List and Drawings, Subpart P Hybrid III 3-year-old child crash test dummy, (H-III3C, Alpha version) | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Phosmet) | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID | APHA Standard Methods, 15th Edition | 1980 | Standard Methods for the Examination of Water and Wastewater. 15th Edition | American Public Health Association | |
Coast Guard | 33 CFR 154, Appendix B, 3.1 | ASTM F1155 | 1998 | Standard Practice for Selection and Application of Piping System Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 419.33(c)(1)(i) | EPA-440-1-82-014 | 1985 | Development Document for Effluent Limitations Guidelines, New Source Performance Standards, and Pretreatment Standards for the Petroleum Refining Point Source Category, Table III-7, pp. 49-54. | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.47(i)(1) | ASTM D3606 | 2010 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(4)(ii) | ASME OM Code | 2004 | Code for Operation and Maintenance of Nuclear Power Plants | American Society of Mechanical Engineers | |
Federal Railroad Administration | 49 CFR 229 Appendix F Verification Guidance (a)(6)(i) | IEC 61508-1 Corr. | 1999 | Corrigendum 1-Part 1: General Requirements | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (19) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Aluminum) | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Heptachlor) | EPA Method 505 | 1995 | Organohalide pesticides/PCBs (Drinking Water) | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.506(s) | 7 CFR 1755.510 | 2012 | Construction and assembly unit drawings | Rural Utilities Service, U.S. Department of Agriculture | |
Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1952 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.01-2(d)(21) | ASME B16.34 | 1996 | Valves--Flanged, Threaded, and Welding End | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 9 CFR 77.1(a) | USDA Uniform Methods and Rules | 1999 | Bovine Tuberculosis Eradication | U.S. Department of Agriculture | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | EPA-570-9-82-004 | 1982 | Manual of Individual Water Supply Systems | U.S. Environmental Protection Agency |