This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1915.156(b)(1)(i) | ASTM F2412 | 2005 | Standard Test Methods for Foot Protection | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM B42 | 1993 | Standard Specification for Seamless Copper Pipe, Standard Sizes | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(x) | EPA-821-R-02-014 | 2002 | Short-term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Marine and Estuarine Organisms, Third Edition | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 14 CFR 152.11(b) | 150/5390-1A | 1969 | Heliport Design Guide | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 110.10-1(g)(6) | IEC 60079-0 | 2000 | Electrical apparatus for Explosive Gas Atmospheres—Part 0: General Requirements (Edition 3.1) | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(2) | Drawing No. SA 150 M020 | 1987 | Neck assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (88) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table Note 2 | APHA Standard Methods On-Line | 2014 | On-line editions of Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(1) | ASTM D95 | 2010 | Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation | ASTM International | |
Labor Department | 41 CFR 50-204.65 | 49 CFR 172 | 2014 | Hazardous Materials Table, Special Provisions, Hazardous Materials Communications, Emergency Response Information, and Training Requirements | U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 60.41c Coal | ASTM D388 | 2004 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 60.5535(d)(1) | ANSI C12.20 | 2010 | American National Standard for Electricity Meters—0.2 and 0.5 Accuracy Classes | American Society of Mechanical Engineers | |
Coast Guard | 7 CFR 1755.508(i) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 111.60-11(c) | UL 83 | 1998 | Standard for Thermoplastic-Insulated Wires and Cables, Twelfth Edition | Underwriters Laboratories, Inc. | |
Food and Drug Administration | 21 CFR 177.1430(c)(3) | ASTM D1492 | 1978 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration | ASTM International | |
Coast Guard | 46 CFR 111.33-3(a)(2) | IEC 92-304 | 1995 | Amendment 1 Electrical Installation in Ships, Part 304: Equipment-Semiconductor Convertors | International Electrotechnical Commission | |
Research and Special Programs Administration | 49 CFR 195.106(e) | ASTM A106/A 106M | 2004 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | ASTM International | |
Coast Guard | 40 CFR 60.335(a)(3) | EPA Method 3 | 2014 | Gas analysis for the determination of dry molecular weight | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 265.1063(d)(1) | ASTM E260 | 1985 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Drawing No. H51970 | 1996 | Type 1-1/2 JQ 225 | Chlorine Institute, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (61) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (23) Silica | APHA Method 4500-SiO2 D | 1998 | Silica, Dissolved, Heteropoly Blue Method | American Public Health Association | |
Energy Department | 10 CFR 440 Appendix A | NFPA 58 | 1989 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 795.232(c)(2)(i) | ASTM D1836 | 1983 | Standard Specification for Commercial Hexanes | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(g)(4) | ISO/TR 15349-1 | 1988 | Unalloyed steel—Determination of low carbon content. Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation), First Edition | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.261(k)(12) | ANSI B15.1 | 1958 | Safety Code for Mechanical Power Transmission Apparatus | American National Standards Institute | |
Coast Guard | 46 CFR 56.20-1(c)(2)(i) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(xlix) | APHA Method 4500-S2-- | 2000 | Sulfide | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.5085(j) Table 3, C1 | ASTM E729 | 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians | ASTM International | |
Environmental Protection Agency | 40 CFR 98.254(e)(2) | ASTM D240 | 2007 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Coast Guard | 46 CFR 160.151-21(k) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 131.44(b)(3) | Florida Statute, Title 28, Section 373.4592 | 2008 | Everglades improvement and management | State of Florida | |
Environmental Protection Agency | 40 CFR 265.192(a)(3)(iii)(C) Note | NACE RP-0285 | 2002 | Recommended Practice for Control of External Corrosion on Metallic Buried, Partially Buried, or Submerged Liquid Storage Systems | National Association of Corrosion Engineers | |
Environmental Protection Agency | 40 CFR 63.1064(b)(3) | API MPMS | 2015 | Weight Loss Test Method for the Measurement of Deck-Fitting Loss Factors for Internal Floating-Roof Tanks, Chapter 19, Section 3, Part E | American Petroleum Institute | |
Centers for Medicare & Medicaid Services | 42 CFR 485.623(d)(1)(i) | NFPA 101 | 2000 | Life Safety Code | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 172.502(b)(1) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API MPMS | 1996 | Chapter 3, Section 3 | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (b)(1) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(18)(iii) | ANSI B31.1 | 1967 | Code for Pressure Piping With Addenda | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. I, 2.9.1.3 | IEC 62301 | 2005 | Household electrical appliances—Measurement of standby power | International Electrotechnical Commission | |
Rural Utilities Service | 7 CFR 1755.890(i)(4)(iii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
National Highway Traffic Safety Administration | 49 CFR 571.209 S4.1(k) | SAE J-800c | 1973 | Recommended Practice for Motor Vehicle Seat Belt Installations | Society of Automotive Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(k)(1) | NACE MR-0175 | 2003 | Sulfide Stress Cracking Resistant Metallic Materials for Oil Field Equipment | National Association of Corrosion Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Chloroneb) | EPA Method 525.1 | 1988 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.01-2(e)(24) | ASTM A312/A 312M | 1995 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix E (1)(C) | MIL-B-2885D | 1975 | Military Specification For Fireman's Boots amendment | U.S. Department of Defense | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.400-18(b) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Food and Drug Administration | 21 CFR 184.1443a(b) | Food Chemicals Codex | 1981 | Malt | National Academy Press | |
Coast Guard | 46 CFR 125.180(b) | ABS Publication | 1983 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 Ft) in Length | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 572.127(d)(2) | Drawing No. SA-572-S26 | 1987 | Lower neck force/moment transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation |