Minerals Management Service |
|
10 CFR 431.64(b)(1) |
ARI 1200 |
2006 |
Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets
|
Air Conditioning and Refrigeration Institute |
Energy Department |
|
10 CFR 431.63(b)(2) |
ARI 1200 |
2006 |
Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets
|
Air Conditioning and Refrigeration Institute |
Energy Department |
|
10 CFR 431.63(b)(1) |
AHAM HRF-1 |
2004 |
Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers
|
Association of Home Appliance Manufacturers |
Energy Department |
|
10 CFR 431.31(a)(2) |
NEMA MG-1 |
1993 |
Motors and Generators
|
National Electrical Manufacturers Association |
Coast Guard |
|
10 CFR 431.294(b)(2) |
AHAM HRF-1 |
2004 |
Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers
|
Association of Home Appliance Manufacturers |
Minerals Management Service |
|
10 CFR 431.294(b)(2) |
ASHRAE 32.1 |
2004 |
Methods of Testing for Rating Vending Machines for Bottled, Canned, and Other Sealed Beverages
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
Minerals Management Service |
|
10 CFR 431.294(b)(1) |
ASHRAE 32.1 |
2004 |
Methods of Testing for Rating Vending Machines for Bottled, Canned, and Other Sealed Beverages
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
Energy Department |
|
10 CFR 431.293(b)(2) |
ASHRAE 32.1 |
2004 |
Methods of Testing for Rating Vending Machines for Bottled, Canned, and Other Sealed Beverages
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
Energy Department |
|
10 CFR 431.293(b)(1) |
AHAM HRF-1 |
2004 |
Energy, Performance and Capacity of Household Refrigerators, Refrigerator-Freezers and Freezers
|
Association of Home Appliance Manufacturers |
Energy Department |
|
10 CFR 431.20(c)(4) |
ISO/IEA Guide 25 |
1983 |
General requirements for the competence of calibration and testing laboratories
|
International Organization for Standardization / International Electrotechnical Commission |
Energy Department |
|
10 CFR 431.20(c)(4) |
IEEE 112 |
1996 |
Test Procedure for Polyphase Induction Motors and Generators
|
Institute of Electrical and Electronics Engineers |
Energy Department |
|
10 CFR 431.20(c)(4) |
CSA C390 |
1993 |
Energy Efficiency Test Methods for Three-Phase Induction Motors, Test Method (1)
|
Canadian Standards Association |
Energy Department |
|
10 CFR 431.20(c)(3) |
ISO/IEC Guide 28 |
2004 |
General rules for a model third-party certification system for products
|
International Organization for Standardization / International Electrotechnical Commission |
Energy Department |
|
10 CFR 431.20(c)(3) |
ISO/IEC Guide 25 |
1990 |
General requirements for the competence of calibration and testing laboratories
|
International Organization for Standardization / International Electrotechnical Commission |
Energy Department |
|
10 CFR 431.20(c)(3) |
ISO/IEC Guide 65 |
1996 |
General requirements for bodies operating product certification systems
|
International Organization for Standardization / International Electrotechnical Commission |
Energy Department |
|
10 CFR 431.20(c)(3) |
ISO Guide 27 |
2003 |
Guidelines for corrective action
|
International Organization for Standardization |
Energy Department |
|
10 CFR 431.20(b)(4) |
IEEE 112 |
1996 |
Test Procedure for Polyphase Induction Motors and Generators
|
Institute of Electrical and Electronics Engineers |
Energy Department |
|
10 CFR 431.20(b)(4) |
CSA C390 |
1993 |
Energy Efficiency Test Methods for Three-Phase Induction Motors, Test Method (1)
|
Canadian Standards Association |
Energy Department |
|
10 CFR 431.19(c)(4) |
IEEE 112 |
1996 |
Test Procedure for Polyphase Induction Motors and Generators
|
Institute of Electrical and Electronics Engineers |
Energy Department |
|
10 CFR 431.19(c)(4) |
CSA C390 |
1993 |
Energy Efficiency Test Methods for Three-Phase Induction Motors, Test Method (1)
|
Canadian Standards Association |
Energy Department |
|
10 CFR 431.19(c)(4) |
ISO/IEC Guide 25 |
1990 |
General requirements for the competence of calibration and testing laboratories
|
International Organization for Standardization / International Electrotechnical Commission |
Energy Department |
|
10 CFR 431.19(c)(3) |
ISO/IEC Guide 25 |
1990 |
General requirements for the competence of calibration and testing laboratories
|
International Organization for Standardization / International Electrotechnical Commission |
Energy Department |
|
10 CFR 431.19(c)(3) |
ISO/IEC Guide 58 |
1993 |
Calibration and testing laboratory accreditation systems—General requirements for operation and recognition
|
International Organization for Standardization / International Electrotechnical Commission |
Energy Department |
|
10 CFR 431.19(b)(4) |
IEEE 112 |
1996 |
Test Procedure for Polyphase Induction Motors and Generators
|
Institute of Electrical and Electronics Engineers |
Energy Department |
|
10 CFR 431.19(b)(4) |
CSA C390 |
1993 |
Energy Efficiency Test Methods for Three-Phase Induction Motors, Test Method (1)
|
Canadian Standards Association |
Energy Department |
|
10 CFR 431.18(b) |
NIST Handbook 150-10 |
1995 |
Efficiency of Electric Motors
|
National Institute of Standards and Technology, National Voluntary Laboratory Accreditation Program |
Energy Department |
|
10 CFR 431.18(b) |
NIST Handbook 150 |
1994 |
Program Procedures and General Requirementsns
|
National Institute of Standards and Technology, National Voluntary Laboratory Accreditation Program |
Energy Department |
|
10 CFR 431.15(e)(2)(vi) |
ISO/IEC Guide 65 |
1993 |
General requirements for bodies operating product certification systems
|
International Organization for Standardization / International Electrotechnical Commission |
Energy Department |
|
10 CFR 431.15(e)(2)(v) |
ISO/IEC Guide 58 |
2004 |
Calibration and testing laboratory accreditation systems—General requirements for operation and recognition
|
International Organization for Standardization / International Electrotechnical Commission |
Energy Department |
|
10 CFR 431.15(e)(2)(iv) |
ISO/IEC Guide 28 |
1990 |
General rules for a model third-party certification system for products
|
International Organization for Standardization / International Electrotechnical Commission |
Energy Department |
|
10 CFR 431.15(e)(2)(iii) |
ISO Guide 27 |
1983 |
Guidelines for corrective action
|
International Organization for Standardization |
Energy Department |
|
10 CFR 431.15(e)(2)(ii) |
ISO/IEC Guide 25 |
2017 |
General requirements for the competence of calibration and testing laboratories
|
International Organization for Standardization / International Electrotechnical Commission |
Energy Department |
|
10 CFR 431.15(e)(2)(i) |
NIST Handbook 150-10 |
1995 |
Efficiency of Electric Motors
|
National Institute of Standards and Technology, National Voluntary Laboratory Accreditation Program |
Energy Department |
|
10 CFR 431.15(e)(2)(i) |
NIST Handbook 150 |
1994 |
Procedures and General Requirements
|
National Institute of Standards and Technology, National Voluntary Laboratory Accreditation Program |
Energy Department |
|
10 CFR 431.15(b)(7) |
IEC 60034-12 |
1980 |
Rotating Electrical Machines
|
International Electrotechnical Commission |
Energy Department |
|
10 CFR 431.15(b)(6) |
IEC 60072-1 |
1991 |
Dimensions and Output Series for Rotating Electrical Machines
|
International Electrotechnical Commission |
Energy Department |
|
10 CFR 431.15(b)(5) |
IEC 60050-411 |
1996 |
International Electrotechnical Vocabulary
|
International Electrotechnical Commission |
Energy Department |
|
10 CFR 431.15(b)(4) |
IEC 60034-1 |
1996 |
Rotating Electrical Machines
|
International Electrotechnical Commission |
Energy Department |
|
10 CFR 431.15(b)(3) |
CSA C390 |
1993 |
Input-Output Method With Indirect Measurement of the Stray-Load Loss and Direct Measurement of the Stator Winding (I2R), Rotor Winding (I2R), Core and Windage-Friction Losses
|
Canadian Standards Association |
Energy Department |
|
10 CFR 431.15(b)(2) |
IEEE 112 |
1996 |
Test Procedure for Polyphase Induction Motors and Generators
|
Institute of Electrical and Electronics Engineers |
Energy Department |
|
10 CFR 431.15(b)(1)(v) |
NEMA MG-1 |
1993 |
Motors and Generators, Section II, Part 14
|
National Electrical Manufacturers Association |
Energy Department |
|
10 CFR 431.15(b)(1)(iv) |
NEMA MG-1 |
1993 |
Motors and Generators, Section II, Part 12
|
National Electrical Manufacturers Association |
Energy Department |
|
10 CFR 431.15(b)(1)(iii) |
NEMA MG-1 |
1993 |
Motors and Generators, Section II, Part 11
|
National Electrical Manufacturers Association |
Energy Department |
|
10 CFR 431.15(b)(1)(ii) |
NEMA MG-1 |
1993 |
Motors and Generators, Section I, Part 4
|
National Electrical Manufacturers Association |
Energy Department |
|
10 CFR 431.15(b)(1)(i) |
NEMA MG-1 |
1993 |
Motors and Generators, Section I, Part 1
|
National Electrical Manufacturers Association |
Energy Department |
|
10 CFR 431.15(b)(1) |
NEMA MG-1 |
1993 |
Motors and Generators
|
National Electrical Manufacturers Association |
Energy Department |
|
10 CFR 431.134(b) |
ARI 810 |
2003 |
Performance Rating of Automatic Commercial Ice-Makers 2003
|
Air Conditioning and Refrigeration Institute |
Energy Department |
|
10 CFR 431.134(b) |
ASHRAE 29 |
2005 |
Methods of Testing Automatic Ice Makers
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
Energy Department |
|
10 CFR 431.133(b)(2) |
ASHRAE 29 |
2005 |
Methods of Testing Automatic Ice Makers
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
Energy Department |
|
10 CFR 431.133(b)(1) |
ARI 810 |
2003 |
Performance Rating of Automatic Commercial Ice-Makers
|
Air Conditioning and Refrigeration Institute |