DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation | CFR Citation Sort ascending | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 431.12, General purpose motor (2) | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 431.12, General purpose motor (1) | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 431.12, General purpose electric motor (Subtype 1) (2) | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 431.12, General purpose electric motor (Subtype 1) (1) | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 431.12, Accreditation | CSA C390 | 1993 | Input-Output Method with Indirect Measurement of the Stray-Load Loss and Direct Measurement of the Stator Winding (I2R), Rotor Winding (I2R), Core and Windage-Friction Losses, Test Method (1) | Canadian Standards Association | |
Energy Department | 10 CFR 431.12, Accreditation | IEEE 112 | 1996 | Test Procedure for Polyphase Induction Motors and Generators | Institute of Electrical and Electronics Engineers | |
Energy Department | 10 CFR 431.106(b) Table | ASTM D 2156 | 1980 | Standard Method for Smoke Density in Flue Gases from Burning Distillate Fuels 1980 | ASTM International | |
Energy Department | 10 CFR 431.106(b) Table | ANSI Z21.10.3 | 1998 | Standard for Gas Water Heaters | American National Standards Institute | |
Energy Department | 10 CFR 431.105(d)(2)(iii) | ASTM D 2156 | 1980 | Standard Method for Smoke Density in Flue Gases from Burning Distillate Fuels | ASTM International | |
Energy Department | 10 CFR 431.105(d)(2)(ii) | ASTM C 177 | 1997 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
Energy Department | 10 CFR 431.105(d)(2)(i) | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | ASTM International | |
Energy Department | 10 CFR 431.105(b) | ANSI Z21.10.3 | 1998 | Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous | American National Standards Institute | |
Energy Department | 10 CFR 431.105(b) | ANSI Z21.10.3a | 2000 | Addenda to Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous | American National Standards Institute | |
Energy Department | 10 CFR 431.105(b) | CSA 4.3-M | 1998 | Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous | Canadian Standards Association | |
Energy Department | 10 CFR 431.105(b) | CSA 4.3a-M | 2000 | Addenda to Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous | Canadian Standards Association | |
Energy Department | 10 CFR 431.102, Standby loss | ANSI Z21.10.3 | 1998 | Standard for Gas Water Heaters | American National Standards Institute | |
Energy Department | 10 CFR 431.102, R-value | ASTM C 177 | 1997 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
Energy Department | 10 CFR 431.102, R-value | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | ASTM International | |
Energy Department | 10 CFR 431.102 | ASTM D 2156 | 1980 | Method of Tests for Smoke Density in Flue Gases from Distillate Fuels | ASTM International | |
Energy Department | 10 CFR 431 Subpart B, App. B, 2 (2) | IEEE 112 | 1996 | Test Procedure for Polyphase Induction Motors and Generators | Institute of Electrical and Electronics Engineers | |
Energy Department | 10 CFR 431 Subpart B, App. B, 2 (1) | CSA C390 | 1993 | Input-Output Method with Indirect Measurement of the Stray-Load Loss and Direct Measurement of the Stator Winding (I2R), Rotor Winding (I2R), Core and Windage-Friction Losses | Canadian Standards Association | |
Energy Department | 10 CFR 431 Subpart B, App. B, 2 | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Energy Department | 88 FR 28780 | 10 CFR 431 | ANSI/ASHRAE 41.3–2014 | 2014 | Energy Conservation Program: Test Procedures for Walk-In Coolers and Walk-In Freezers | American Society of Heating, Refrigerating and Air Conditioning Engineers |
Energy Department | 88 FR 18965 | 10 CFR 431 | ASHRAE Standard 90.1–2016 | 2016 | Energy Conservation Program: Energy Conservation Standards for Variable Refrigerant Flow Multi-Split Air Conditioners and Heat Pumps | American Society of Heating, Refrigerating and Air Conditioning Engineers |
Energy Department | 88 FR 28381 | 10 CFR 431 | NFRC 102–2020 [E0A0] | 2020 | Energy Conservation Program: Test Procedure for Refrigerated Bottled or Canned Beverage Vending Machines | National Fenestration Rating Council |
Energy Department | 88 FR 17934 | 10 CFR 431 | ANSI/HI 14.1–14.2–2019 | 2019 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | Hydraulic Institute |
Energy Department | 88 FR 53371 | 10 CFR 431 | ANSI/AMCA 230– 23 | 2023 | Energy Conservation Program: Test Procedure for Fans and Blowers | Air Movement and Control Association |
Energy Department | 88 FR 17934 | 10 CFR 431 | ISO 5167–1:2003(E) | 2003 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | International Organization for Standardization |
Energy Department | 87 FR 37685 | 10 CFR 431 | ANSI C82.9–2016 | 2016 | Energy Conservation Program: Test Procedure for Metal Halide Lamp Fixtures | American National Standards Institute |
Energy Department | 88 FR 36217 | 10 CFR 431 | ANSI/AHRI 1500–2015 | 2015 | Energy Conservation Program: Test Procedure for Commercial Warm Air Furnaces | Air Conditioning, Heating, and Refrigeration Institute |
Energy Department | 88 FR 36217 | 10 CFR 431 | NFPA 97–2003 | 2003 | Energy Conservation Program: Test Procedure for Commercial Warm Air Furnaces | National Fire Protection Association |
Energy Department | 87 FR 33316 | 10 CFR 431 | AATCC TM135–2010 | 2010 | Energy Conservation Program: Test Procedures for Residential and Commercial Clothes Washers | American Association of Textile Chemists and Colorists |
Energy Department | 88 FR 28780 | 10 CFR 431 | ANSI/ASHRAE 41.6–2014 | 2014 | Energy Conservation Program: Test Procedures for Walk-In Coolers and Walk-In Freezers | American Society of Heating, Refrigerating and Air Conditioning Engineers |
Energy Department | 88 FR 17934 | 10 CFR 431 | ANSI/ASME MFC–5M–1985 (R2006) | 2006 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | American Society of Mechanical Engineers |
Energy Department | 88 FR 53371 | 10 CFR 431 | ANSI/AMCA 210–16 | 2016 | Energy Conservation Program: Test Procedure for Fans and Blowers | Air Movement and Control Association |
Energy Department | 88 FR 17934 | 10 CFR 431 | ISO 5198:1987(E) | 1987 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | International Organization for Standardization |
Energy Department | 87 FR 37685 | 10 CFR 431 | IEC 63103:2020 | 2011 | Energy Conservation Program: Test Procedure for Metal Halide Lamp Fixtures | International Electrotechnical Commission |
Energy Department | 87 FR 33316 | 10 CFR 431 | AATCC TM79–2010 | 2010 | Energy Conservation Program: Test Procedures for Residential and Commercial Clothes Washers | American Association of Textile Chemists and Colorists |
Energy Department | 88 FR 28780 | 10 CFR 431 | AHRI 1250–2020 | 2020 | Energy Conservation Program: Test Procedures for Walk-In Coolers and Walk-In Freezers | Air Conditioning, Heating, and Refrigeration Institute |
Energy Department | 88 FR 36392 | 10 CFR 431 | ASHRAE Standard 90.1-2019 | 2023 | Energy Conservation Program: Energy Conservation Standards for Computer Room Air Conditioners | American Society of Heating, Refrigerating and Air Conditioning Engineers |
Energy Department | 87 FR 75144 | 10 CFR 431 | ANSI/ASHRAE 37-2009 (R2019) | 2009 | Energy Conservation Program: Test Procedure for Single Package Vertical Air Conditioners and Single Package Vertical Heat Pumps | American National Standards Institute |
Energy Department | 88 FR 36217 | 10 CFR 431 | UL 727–2018 | 2018 | Energy Conservation Program: Test Procedure for Commercial Warm Air Furnaces | Underwriters Laboratories, Inc. |
Energy Department | 87 FR 33316 | 10 CFR 431 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedures for Residential and Commercial Clothes Washers | International Electrotechnical Commission |
Energy Department | 88 FR 28780 | 10 CFR 431 | ANSI/ASHRAE 41.10–2013 | 2013 | Energy Conservation Program: Test Procedures for Walk-In Coolers and Walk-In Freezers | American Society of Heating, Refrigerating and Air Conditioning Engineers |
Energy Department | 88 FR 17934 | 10 CFR 431 | ASME MFC–3M–2004 (R2017) | 2017 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | American Society of Mechanical Engineers |
Energy Department | 88 FR 17934 | 10 CFR 431 | ISO 6416:2017(E) | 2017 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | International Organization for Standardization |
Energy Department | 87 FR 75144 | 10 CFR 431 | ANSI/ASHRAE 41.2-1987 (RA 92) | 1987 | Energy Conservation Program: Test Procedure for Single Package Vertical Air Conditioners and Single Package Vertical Heat Pumps | American National Standards Institute |
Energy Department | 88 FR 36392 | 10 CFR 431 | AHRI 1360– 2017 | 2022 | Energy Conservation Program: Energy Conservation Standards for Computer Room Air Conditioners | Air Conditioning, Heating, and Refrigeration Institute |
Energy Department | 88 FR 28780 | 10 CFR 431 | ASTM C518–17 | 2017 | Energy Conservation Program: Test Procedures for Walk-In Coolers and Walk-In Freezers | ASTM International |
Energy Department | 88 FR 17934 | 10 CFR 431 | ASME MFC–8M–2001 (R2011) | 2011 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | American Society of Mechanical Engineers |