| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(4) |
ASTM A391 |
1965 |
Alloy Steel Chain
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(3) |
ASTM A126 |
1966 |
Gray iron Casting for Valves, Flanges and Pipe Fittings
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(28) |
ASTM F2413 |
2005 |
Standard Specification for Performance Requirements for Protective Footwear
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(27) |
ASTM F2412 |
2005 |
Standard Test Methods for Foot Protection
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(26) |
ASTM D3828 |
2007 |
Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(25) |
ASTM D3278 |
2004 |
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(24) |
ASTM D2161 |
1966 |
Conversion Tables for SUS
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(23) |
ASTM D1692 |
1968 |
Test for Flammability of Plastic Sheeting and Cellular Plastics
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(22) |
ASTM D1078 |
2005 |
Standard Test Method for Distillation Range of Volatile Organic Liquids
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(21) |
ASTM D445 |
1965 |
Test for Viscosity of Transparent and Opaque Liquids
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(20) |
ASTM D323 |
1968 |
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(2) |
ASTM A53 |
1969 |
Welded and Seamless Steel Pipe
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(19) |
ASTM D240 |
2007 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(18) |
ASTM D93 |
2008 |
Test for Flash Point by Pensky Martens Closed Cup Tester
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(17) |
ASTM D93 |
1971 |
Test for Flash Point by Pensky Martens Closed Cup Tester
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(16) |
ASTM D88 |
1956 |
Test for Saybolt Viscosity
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(15) |
ASTM D86 |
2007 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(14) |
ASTM D86 |
1962 |
Test for Distillation of Petroleum Products
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(13) |
ASTM D56 |
2005 |
Standard Test Method for Flash Point by Tag Closed Cup Tester
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(12) |
ASTM D56 |
1970 |
Test for Flash Point by Tag Closed Tester
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(11) |
ASTM D5 |
1965 |
Test for Penetration by Bituminous Materials
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(10) |
ASTM B241 |
1969 |
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(1) |
ASTM A47 |
1968 |
Malleable Iron Castings
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(7) |
ASME B56.6 |
1992 |
Safety Standard for Rough Terrain Forklift Trucks with addenda
Archived
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(6) |
ASME UPV Code |
1951 |
Code for Unfired Pressure Vessels for Petroleum Liquids and Gases
Archived
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(6) |
API UPV Code |
1951 |
Code for Unfired Pressure Vessels for Petroleum Liquids and Gases
Archived
|
American Petroleum Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(5) |
ASME B&PV Code |
1969 |
Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels, Including Addenda
Archived
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(4) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VIII, Paragraph UG-84
Archived
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(3) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VIII
Archived
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(2) |
ASME B&PV Code |
1968 |
Code for Pressure Vessels
Archived
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(1) |
ASME B&PV Code |
1949 |
Boiler and Pressure Vessel Code, Section VIII
Archived
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(1) |
ASME B&PV Code |
1950 |
Boiler and Pressure Vessel Code, Section VIII
Archived
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(1) |
ASME B&PV Code |
1952 |
Boiler and Pressure Vessel Code, Section VIII
Archived
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(1) |
ASME B&PV Code |
1956 |
Boiler and Pressure Vessel Code, Section VIII
Archived
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(1) |
ASME B&PV Code |
1959 |
Boiler and Pressure Vessel Code, Section VIII
Archived
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(1) |
ASME B&PV Code |
1962 |
Boiler and Pressure Vessel Code, Section VIII
Archived
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(f)(9) |
API 2201 |
1963 |
Welding or Hot Tapping on Equipment Containing Flammables
Archived
|
American Petroleum Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(f)(8) |
API 2000 |
1968 |
Venting Atmospheric and Low Pressure Storage Tanks
Archived
|
American Petroleum Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(f)(7) |
API 1104 |
1968 |
Standard for Welding Pipelines and Related Facilities
Archived
|
American Petroleum Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(f)(6) |
API 650 |
1966 |
Welded Steel Tanks for Oil Storage
Archived
|
American Petroleum Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(f)(5) |
API 620 |
1970 |
Recommended Rules for Design and Construction of Large Welded Low Pressure Storage Tanks
Archived
|
American Petroleum Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(f)(4) |
API 12F |
1961 |
Specification for Small Welded Production Tanks
Archived
|
American Petroleum Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(f)(3) |
API 12D |
1957 |
Specification for Large Welded Production Tanks
Archived
|
American Petroleum Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(f)(2) |
API 12B |
1958 |
Specification for Bolted Production Tanks
Archived
|
American Petroleum Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(9) |
ANSI A14.3 |
1956 |
Safety Code for Fixed Ladders
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(8) |
ANSI A14.2 |
1956 |
Safety Code for Portable Metal Ladders
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(79) |
ANSI Z89.2 |
1971 |
Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(78) |
ANSI Z89.1 |
1969 |
Safety Requirements for Industrial Head Protection
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(77) |
ANSI Z87.1 |
1968 |
Practice of Occupational and Educational Eye and Face Protection;
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(76) |
ANSI Z41.1 |
1967 |
Men's Safety Toe Footwear
Archived
|
American National Standards Institute |