This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation Sort descending | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(l)(1)(iii) | ISO 11119-3 | 2002 | Gas cylinders of composite construction--Specification and test methods--Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(m)(1) | ISO 11114-1 | 1997 | Transportable gas cylinders--Compatibility of cylinder and valve materials with gas contents--Part 1: Metallic materials | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(m)(2) | ISO 11114-2 | 2000 | Transportable gas cylinders-- Compatibility of cylinder and valve materials with gas contents--Part 2: Non- metallic materials | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(r)(2) | ISO 7225 | 2005 | Gas Cylinders--Precautionary Labels | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 178.74(c)(5)(ii) | ISO 1496-3 | 1995 | Series 1 Freight Containers--Specification and Testing--Part 3, Tank containers for Liquids, Gases and Pressurized Dry Bulk | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(d)(3)(i) | ISO 9809-1 | 1999 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 1: Quenched and Tempered Steel Cylinders with Tensile Strength less than 1 100 MPa, | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(d)(3)(ii) | ISO 11120 | 1999 | Gas cylinders--Refillable seamless steel tubes of water capacity between 150 L and 3000 L--Design, construction and testing | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(d)(3)(ii) | ISO 9809-2 | 2000 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 2: Quenched and Tempered Steel Cylinders with Tensile Strength Greater than or Equal to 1 100 MPa | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(d)(3)(iii) | ISO 9809-3 | 2000 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 3: Normalized Steel Cylinders | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(h)(4)(iv) | ISO 1496-3 | 1995 | Series 1 Freight Containers--Specification and Testing--Part 3, Tank containers for Liquids, Gases and Pressurized Dry Bulk | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(i)(4) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.801(i) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Transportation Department | 85 FR 44994 | 49 CFR 179 | AAR Circular OT-55-Q | 2018 | Hazardous Materials: Liquefied Natural Gas by Rail | Association of American Railroads |
Transportation Department | 85 FR 44994 | 49 CFR 179 | AAR MSRP Section C Part III | 2014 | Hazardous Materials: Liquefied Natural Gas by Rail | Association of American Railroads |
Transportation Department | 85 FR 75680 | 49 CFR 179 | APA Standard 87-1 A, B, C | 2018 | Hazardous Materials: Adoption of Miscellaneous Petitions To Reduce Regulatory Burdens | American Pyrotechnics Association |
Research and Special Programs Administration | 49 CFR 179.100 | ASTM A588 | 1981 | High-Strength Low-Alloy Structural Steel with 50 ksi Minimum Yield Point to 4 inches Thick | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.100-10(a) | AAR Publication | 2000 | AAR Specification for Design, Fabrication and Construction of Freight Cars, Appendix W | Association of American Railroads | |
Research and Special Programs Administration | 49 CFR 179.100-10(c) | ASTM A240/A 240M | 1994 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.100-12(a) | AAR Publication | 2000 | AAR Specification for Design, Fabrication and Construction of Freight Cars, Appendix E | Association of American Railroads | |
Research and Special Programs Administration | 49 CFR 179.100-13(e) | AAR Publication | 1981 | AAR Specification for Design, Fabrication and Construction of Freight Cars, Appendix W | Association of American Railroads | |
Research and Special Programs Administration | 49 CFR 179.100-14(a)(1) | AAR Publication | 1969 | AAR Specification for Design, Fabrication and Construction of Freight Cars, Appendix E | Association of American Railroads | |
Research and Special Programs Administration | 49 CFR 179.100-18(c) | AAR Publication | 1982 | AAR Specification for Design, Fabrication and Construction of Freight Cars, Appendix W | Association of American Railroads | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.100-20(a) | ASTM A240/A 240M | 1999 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.100-20(a) | ASTM A516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.100-7(a) | ASTM A302/A 302M | 1993 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum Nickel | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.100-7(a) | ASTM A516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.100-7(a) | ASTM A537/A 537M | 1991 | Standard for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.100-7(b) | ASTM B209 | 1993 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.100-7(c)(1) | ASTM A240/A 240M | 1994 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.100-7(c)(2)(i) | ASTM A262 | 1993 | Standard Practice for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.101-1 Table Note 6 | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Research and Special Programs Administration | 49 CFR 179.102-1(a)(1) | AAR Publication | 2000 | Specification for Tank Cars, Appendix W | Association of American Railroads | |
Research and Special Programs Administration | 49 CFR 179.102-1(a)(1) | ASTM A516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.102-1(a)(1) | ASTM A370 | 1994 | Standard Test Method and Definitions for Mechanical Testing of Steel Products | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.102-1(a)(1) | ARA Specification TC 128 | 2000 | AAR Specifications for Tank Cars, Grade B | Association of American Railroads | |
Research and Special Programs Administration | 49 CFR 179.102-1(a)(1) | ASTM A240/A 240M | 1994 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.102-1(a)(1) | ASTM A20/A 20M | 1993 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.102-17(b)(1) | ASTM A240/A 240M | 1999 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.102-17(b)(2) | ARA Specification TC 128 | 2000 | AAR Specifications for Tank Cars, Grade B | Association of American Railroads | |
Research and Special Programs Administration | 49 CFR 179.102-17(b)(2) | ASTM A537/A 537M | 1991 | Standard for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.102-17(b)(2) | ASTM A516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.102-17(b)(2)(i) | ASTM A20/A 20M | 1993 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.102-17(b)(2)(ii) | ASTM A370 | 1994 | Standard Test Method and Definitions for Mechanical Testing of Steel Products | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.102-17(b)(2)(iii)(A) | AAR Publication | 2000 | Specification for Tank Cars, Appendix W | Association of American Railroads | |
Research and Special Programs Administration | 49 CFR 179.102-2(a)(1) | ASTM A516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.102-4(a)(1) | ASTM A240/A 240M | 1994 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.102-4(a)(2) | ASTM A516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.102-4(a)(2) | AAR Specification TC 128 | 2000 | AAR Specifications for Tank Cars, Grade B | Association of American Railroads | |
Research and Special Programs Administration | 49 CFR 179.102-4(a)(2) | ASTM A537/A 537M | 1991 | Standard for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.102-4(a)(2)(i) | ASTM A20/A 20M | 1993 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International |