This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation Sort descending | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 87 FR 63588 | 10 CFR 431 | ANSI/NEMA MG 1-2016 (Revision 1, 2018) | 2016 | Energy Conservation Program: Test Procedure for Electric Motors | National Electrical Manufacturers Association |
Energy Department | 88 FR 84188 | 10 CFR 431 | AHRI 600-2023 (I-P) | 2023 | Energy Conservation Program: Test Procedure for Water-Source Heat Pumps | Air Conditioning and Refrigeration Institute |
Energy Department | 87 FR 37685 | 10 CFR 431 | ANSI C78.44-2016 | 2016 | Energy Conservation Program: Test Procedure for Metal Halide Lamp Fixtures | American National Standards Institute |
Energy Department | 88 FR 17934 | 10 CFR 431 | ANSI/AWWA E103-2015 | 2015 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | American Water Works Association |
Energy Department | 88 FR 28780 | 10 CFR 431 | ASTM C518-17 | 2017 | Energy Conservation Program: Test Procedures for Walk-In Coolers and Walk-In Freezers | ASTM International |
Energy Department | 87 FR 45164 | 10 CFR 431 | AHRI Standard 1060 (I-P) | 2018 | Energy Conservation Program: Test Procedure for Direct Expansion-Dedicated Outdoor Air Systems | Air Conditioning, Heating, and Refrigeration Institute |
Energy Department | 88 FR 36217 | 10 CFR 431 | ASTM D4809-09a | 2012 | Energy Conservation Program: Test Procedure for Commercial Warm Air Furnaces | ASTM International |
Energy Department | 87 FR 63588 | 10 CFR 431 | NFPA 20-2022 | 2022 | Energy Conservation Program: Test Procedure for Electric Motors | National Fire Protection Association |
Energy Department | 88 FR 84188 | 10 CFR 431 | Errata Sheet for ANSI/ASHRAE Standard 37-2009 | 2019 | Energy Conservation Program: Test Procedure for Water-Source Heat Pumps | American Society of Heating, Refrigerating and Air Conditioning Engineers |
Energy Department | 87 FR 37685 | 10 CFR 431 | ANSI C82.6- 2015 (R2020) | 2015 | Energy Conservation Program: Test Procedure for Metal Halide Lamp Fixtures | American National Standards Institute |
Energy Department | 88 FR 36066 | 10 CFR 431 | ANSI/NEMA MG 1-2016 | 2016 | Energy Conservation Program: Energy Conservation Standards for Electric Motors | National Electrical Manufacturers Association |
Energy Department | 87 FR 65856 | 10 CFR 431 | AHRI 810 (I-P)-2016 with Addendum 1 | 2016 | Energy Conservation Program: Test Procedure for Automatic Commercial Ice Makers | Air Conditioning, Heating, and Refrigeration Institute |
Energy Department | 88 FR 17934 | 10 CFR 431 | IEEE 112-2017 | 2017 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | Institute of Electrical and Electronics Engineers |
Energy Department | 88 FR 28780 | 10 CFR 431 | ASTM C1199-14 | 2014 | Energy Conservation Program: Test Procedures for Walk-In Coolers and Walk-In Freezers | ASTM International |
Energy Department | 87 FR 45164 | 10 CFR 431 | ANSI/ASHRAE 37-2009 (RA 2019) | 2009 | Energy Conservation Program: Test Procedure for Direct Expansion-Dedicated Outdoor Air Systems | American National Standards Institute |
Energy Department | 85 FR 1504 | 10 CFR 431 | ISO 1217:2009(E) | 2009 | Energy Conservation Program: Energy Conservation Standards for Air Compressors | International Organization for Standardization |
Energy Department | 88 FR 36217 | 10 CFR 431 | ASTM D5291-10(2015) | 2015 | Energy Conservation Program: Test Procedure for Commercial Warm Air Furnaces | ASTM International |
Energy Department | 88 FR 84188 | 10 CFR 431 | ISO 13256-1:1998 | 1998 | Energy Conservation Program: Test Procedure for Water-Source Heat Pumps | International Organization for Standardization |
Energy Department | 88 FR 21816 | 10 CFR 431 | ANSI/ASHRAE 127-2007 | 2007 | Energy Conservation Program: Test Procedure for Computer Room Air Conditioners | American Society of Heating, Refrigerating and Air Conditioning Engineers |
Energy Department | 87 FR 37685 | 10 CFR 431 | ANSI C82.9-2016 | 2016 | Energy Conservation Program: Test Procedure for Metal Halide Lamp Fixtures | American National Standards Institute |
Energy Department | 88 FR 17934 | 10 CFR 431 | ISO 1438:2017(E) | 2017 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | International Organization for Standardization |
Energy Department | 88 FR 66152 | 10 CFR 431 | AHRI 1200-2023 (I-P) | 2023 | Energy Conservation Program: Test Procedure for Commercial Refrigerators, Refrigerator-Freezers, and Freezers | Air Conditioning, Heating, and Refrigeration Institute |
Energy Department | 88 FR 28780 | 10 CFR 431 | NFRC 102-2020 [E0A0] | 2020 | Energy Conservation Program: Test Procedures for Walk-In Coolers and Walk-In Freezers | National Fenestration Rating Council |
Energy Department | 87 FR 45164 | 10 CFR 431 | ANSI/ASHRAE Standard 41.1-2013 | 2013 | Energy Conservation Program: Test Procedure for Direct Expansion-Dedicated Outdoor Air Systems | American National Standards Institute |
Energy Department | 10 CFR 431 Subpart B, App. B, 2 | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 431 Subpart B, App. B, 2 (1) | CSA C390 | 1993 | Input-Output Method with Indirect Measurement of the Stray-Load Loss and Direct Measurement of the Stator Winding (I2R), Rotor Winding (I2R), Core and Windage-Friction Losses | Canadian Standards Association | |
Energy Department | 10 CFR 431 Subpart B, App. B, 2 (2) | IEEE 112 | 1996 | Test Procedure for Polyphase Induction Motors and Generators | Institute of Electrical and Electronics Engineers | |
Energy Department | 10 CFR 431.102 | ASTM D2156 | 1980 | Method of Tests for Smoke Density in Flue Gases from Distillate Fuels | ASTM International | |
Energy Department | 10 CFR 431.102, R-value | ASTM C177 | 1997 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
Energy Department | 10 CFR 431.102, R-value | ASTM C518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | ASTM International | |
Energy Department | 10 CFR 431.102, Standby loss | ANSI Z21.10.3 | 1998 | Standard for Gas Water Heaters | American National Standards Institute | |
Energy Department | 10 CFR 431.105(b) | ANSI Z21.10.3a | 2000 | Addenda to Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous | American National Standards Institute | |
Energy Department | 10 CFR 431.105(b) | CSA 4.3a-M | 2000 | Addenda to Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous | Canadian Standards Association | |
Energy Department | 10 CFR 431.105(b) | CSA 4.3-M | 1998 | Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous | Canadian Standards Association | |
Energy Department | 10 CFR 431.105(b) | ANSI Z21.10.3 | 1998 | Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous | American National Standards Institute | |
Energy Department | 10 CFR 431.105(d)(2)(i) | ASTM C518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | ASTM International | |
Energy Department | 10 CFR 431.105(d)(2)(ii) | ASTM C177 | 1997 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
Energy Department | 10 CFR 431.105(d)(2)(iii) | ASTM D2156 | 1980 | Standard Method for Smoke Density in Flue Gases from Burning Distillate Fuels | ASTM International | |
Energy Department | 10 CFR 431.106(b) Table | ANSI Z21.10.3 | 1998 | Standard for Gas Water Heaters | American National Standards Institute | |
Energy Department | 10 CFR 431.106(b) Table | ASTM D2156 | 1980 | Standard Method for Smoke Density in Flue Gases from Burning Distillate Fuels 1980 | ASTM International | |
Energy Department | 10 CFR 431.12, Accreditation | IEEE 112 | 1996 | Test Procedure for Polyphase Induction Motors and Generators | Institute of Electrical and Electronics Engineers | |
Energy Department | 10 CFR 431.12, Accreditation | CSA C390 | 1993 | Input-Output Method with Indirect Measurement of the Stray-Load Loss and Direct Measurement of the Stator Winding (I2R), Rotor Winding (I2R), Core and Windage-Friction Losses, Test Method (1) | Canadian Standards Association | |
Energy Department | 10 CFR 431.12, General purpose electric motor (Subtype 1) (1) | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 431.12, General purpose electric motor (Subtype 1) (2) | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 431.12, General purpose motor (1) | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 431.12, General purpose motor (2) | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 431.12, Nominal full load efficiency | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 431.133(b)(1) | ARI 810 | 2003 | Performance Rating of Automatic Commercial Ice-Makers | Air Conditioning and Refrigeration Institute | |
Energy Department | 10 CFR 431.133(b)(2) | ASHRAE 29 | 2005 | Methods of Testing Automatic Ice Makers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Energy Department | 10 CFR 431.134(b) | ASHRAE 29 | 2005 | Methods of Testing Automatic Ice Makers | American Society of Heating, Refrigerating and Air Conditioning Engineers |