This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-320a | 1972 | Minimum Performance Criteria for Rollover Protective Structure for Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Research and Special Programs Administration | 49 CFR 178.337-2(b)(2)(i) | ASTM A 612 | 1972 | Standard Specification for High-Strength Steel Plates for Pressure Vessels for Moderate and Lower Temperature Service | ASTM International | |
Energy Department | 10 CFR 430.2, Definitions, Kerosene | ANSI Z91.1 | 1972 | Performance Standards for Oil-Powered Central Furnaces | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 75.322 | ACGIH Publication | 1972 | Threshold Limit Values for Substance in Workroom Air | American Conference of Governmental Industrial Hygienists | |
Food and Drug Administration | 16 CFR 1201.7(b)(1) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(ii) Footnote 1 | USACE EM-385-1-1 | 1972 | General Safety Requirements EM 385-1-1, Change 1, No. 21, Para. 18.A.20 | Department of the Army, U.S. Army Corps of Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5325-6A | 1972 | Airport Design Standards--Effect and Treatment of Jet Blast | Federal Aviation Administration, U.S. Department of Transportation | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec L-S-125B | 1972 | Screening, Insect, Non-Metallic | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 | ASTM D 2013 | 1972 | Standard Method of Preparing Coal Samples for Analysis | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1201.7(b)(1) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 147.2201(b)(1) | TXUIC regulations | 1972 | Texas Water Code, Chapters 26, 27 and 29 (Vernon 1972 and Supp. 1982) | State of Texas | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(ii) | SAE J-394a | 1972 | Minimum Performance Criteria for Rollover Protective Structures for Wheeled Front-End Loaders and Wheeled Dozers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.156 | ANSI/NFPA 1972 | 1972 | Standard on Helmets for Structural Fire Fighting | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 62a | 1972 | Factory-Applied Laminated Roofing Systems Based on Chlorosulfonated Polyethylene (CPSE) | U.S. Department of Housing and Urban Development | |
Housing and Urban Development Department | 24 CFR 3280.705(f)(1) | SAE J-533B | 1972 | Flares for Tubing | Society of Automotive Engineers | |
Coast Guard | 46 CFR 28.345(b) | ABYC E-1 | 1972 | Bonding of Direct Current Systems | American Boat and Yacht Council | |
Mine Safety and Health Administration | 30 CFR 70.1900(c) | ACGIH Publication | 1972 | Threshold Limit Values for Substance in Workroom Air | American Conference of Governmental Industrial Hygienists | |
Consumer Product Safety Commission | 16 CFR 1201.7(b)(2) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 75.322 | ACGIH Publication | 1972 | Threshold Limit Values for Substance in Workroom Air | American Conference of Governmental Industrial Hygienists | |
Housing and Urban Development Department | 24 CFR 3280.705(f)(2) | SAE J-533B | 1972 | Flares for Tubing | Society of Automotive Engineers | |
Housing and Urban Development Department | 24 CFR 200.942(a)(1)(v) | ASTM D 1335 | 1972 | Standard Test Method for Tuft Bind of Pile Floor Coverings | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.358-2(f) | AWS B3.0 | 1972 | Standard Qualification Procedure | American Welding Society | |
Coast Guard | 46 CFR 160.052-3(d)(2) | MIL-W-530F | 1972 | Webbing, Textile, Cotton, General Purpose, Natural and In Colors | U.S. Department of Defense | |
Coast Guard | 46 CFR 125.180(b) | ABYC E-1 | 1972 | Bonding of Direct-Current Systems | American Boat and Yacht Council | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-394 | 1972 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 11 | Industrial Method 129-71W | 1972 | Fluoride in Water and Wastewater | Bran & Luebbe Analyzing Technologies, Inc. | |
Environmental Protection Agency | 40 CFR 147.200(a)(4) | ARUIC regulations | 1972 | General Rule and Regulations, Arkansas Oil and Gas Commission (Order No. 2-39, revised July 1972) | State of Arkansas | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(i) | SAE J-320b | 1972 | Minimum Performance Criteria for Rollover Protective Structures for Prime Movers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(v)(1) | ANSI K61.1 | 1972 | Standard for the Storage and Handling of Anhydrous Ammonia | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 71.700(a) | ACGIH Publication | 1972 | Threshold Limit Values for Substance in Workroom Air | American Conference of Governmental Industrial Hygienists | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | Industrial Method 129-71W | 1972 | Fluoride in Water and Wastewater | Bran & Luebbe Analyzing Technologies, Inc. | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5190-3A | 1972 | Model Airport Hazard Zoning Ordinance | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 28.40(b) | ABYC E-1 | 1972 | Bonding of Direct Current Systems | American Boat and Yacht Council | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-395 | 1972 | Minimum Performance Criteria for Roll-Over Protective Structures for Crawler Tractors and Crawler-Type Loaders | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.97(b)(12) | RUS Bulletin 345-184, Form 397e | 1971 | Specifications for Mobile and Fixed Dial Radio Telephone Equipment | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 160.023-1(a)(1) | MIL-S-18655C | 1971 | Signal, Smoke and Illumination, Marine, Mark 13, Mod 0. | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (57) | EPA Method 160.4 | 1971 | Residue, Volatile (Gravimetric, Ignition at 550 degrees C) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | EPA Method 213.1 | 1971 | Cadmium (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(19) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | USGS I-3271-85 | 1971 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Federal Trade Commission | 16 CFR 460.5(e)(2)(i) | FedSpec HH-I-530A | 1971 | Insulation, Board, Thermal (Urethane) | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1910.124(b)(4)(iv) | ANSI Z9.1 | 1971 | Practices for Ventilation and Operation of Open-Surface Tanks | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60, Appendix A-5, Method 12, Section 7.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Food and Drug Administration | 16 CFR 1402.4(a)(1)(i)(E)(1) | ANSI Z53.1 | 1971 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-39A | 1971 | Runway and Taxiway Retroreflective Markers | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 60.17(g)(114) | ASTM D 2986 | 1971 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.156 | ANSI/NFPA 1971 | 1971 | Protective Clothing for Structural Fire Fighters | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 61.18(a)(10) | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.900(k)(5) | IME Publication 20 | 1971 | Radio Frequency Energy—A Potential Hazard in the Use of Electric Blasting Caps | Institute of Makers of Explosives | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(20) | ANSI J6.5 | 1971 | Rubber Insulating Sleeves | American National Standards Institute |