This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Ametryn) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 261.198(b) | NFPA 30 | 1980 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 63.1282(g)(5)(iii) | ASTM D 6522 | 2005 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE 1584b | 2011 | Amendment 2: Changes to Clause 4 of IEEE Std 1584-2002, IEEE Guide for Performing Arc-Flash Hazard Calculations | Institute of Electrical and Electronics Engineers | |
Food and Drug Administration | 21 CFR 172.859(b)(9) | FDA Publication | 2004 | Methyl Ethyl Ketone Test, Methyl Alcohol Test | Food and Drug Administration, U.S. Department of Health and Human Services | |
Public Health Service | 42 CFR 84.193 | ANSI K13.1 | 1973 | Identification of Air-Purifying Respirator Canisters and Cartridges | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 178.65(c)(4) | CGA C-3 | 1994 | Standard for Welding and Brazing on Thinned Walled Containers | Compressed Gas Association | |
Housing and Urban Development Department | 24 CFR 3280.703 | ASTM B 280, A-95 | 1995 | Seamless Copper Tube for Air Conditioning and Refrigeration Field Service | ASTM International | |
Coast Guard | 29 CFR 1917.91(a)(1)(i)(B) | ANSI/ASSE Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
Federal Communications Commission | 47 CFR 80.1101(d)(1)(ii) | IMO Resolution A.811(19) | 1989 | No title given | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.125(a) | Drawing No. 127-2000 | 1994 | Upper Torso Assembly | Reprographic Technologies | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(3)(ii) | ASME OM Code | 2004 | Code for Operation and Maintenance of Nuclear Power Plants | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.903(o)(1) | ITU-T Recommendation G.657 | 2006 | Series G: Transmission Systems and Media, Digital Systems and Networks, Transmission media characteristics—Optical fibre cables, Characteristics of a bending loss insensitive single mode optical fibre and cable for the access network | International Telecommunication Union--Telecommunication | |
Environmental Protection Agency | 40 CFR 60.1675(a) | ASME QRO-1 | 1994 | Standard for the Qualification and Certification of Resource Recovery Facility Operators | American Society of Mechanical Engineers | |
Food and Drug Administration | 40 CFR 1065.701 Table 1 | ASTM D 1655 | 2013 | Standard Specification for Aviation Turbine Fuels | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(7) | SAE J-588 | 2000 | Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (120) | EPA Method 1653 | 1997 | Chlorinated Phenolics in Wastewater by In Situ Acetylation and GCMS. Revision A | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.402(c)(2) Table | EPA Method 1600 | 2006 | Enterococci in Water by Membrane Filtration Using membrane-Enterococcus Indoxyl-?-D-Glucoside Agar (mEI) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(l)(9) | EPA SW-846-8270D | 2007 | Semivolatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS), Revision 4 | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.902(r)(7) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Energy Department | 10 CFR 420.15(a)(3) | ASHRAE 90.1 | 1989 | Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings with addenda | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.043-2(a) | DWG. No. 160.043-1(b) | 2012 | Jackknife (With Can Opener) | U.S. Coast Guard | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (73) | ASTM D 1889 | 2000 | Standard Test Method for Turbidity of Water (Withdrawn 2007) | ASTM International | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Carbon tetrachloride) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41da Subbituminous coal | ASTM D 388 | 1998 | Standard Classification of Coals by Rank | ASTM International | |
Health and Human Services Department | 45 CFR 170.202(d) | ONC Implementation Guide for Direct Edge Protocols, v1.1 | 2014 | ONC Implementation Guide for Direct Edge Protocols | Office of the National Coordinator for Health Information Technology | |
Occupational Safety and Health Administration | 29 CFR 1910.67(b)(2) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 30 | 2003 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC P-4 | 1989 | Marine Inboard Engines | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 89.416(a) | SAE J-244 | 1983 | Recommended Practice for Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines | Society of Automotive Engineers | |
Coast Guard | 46 CFR 30.10-22(b)(Note 1) | ASTM D 323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Coast Guard | 46 CFR 56.50-105 Table | ASTM A 350/A 350M | 1997 | Standard Specification for Forgings, Carbon and Low-Alloy Steel, Requiring Notch Toughness Testing for Piping Components | ASTM International | |
Environmental Protection Agency | 40 CFR 80.46(a)(4) | ASTM D 3246 | 2011 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulemetry | ASTM International | |
Energy Department | 10 CFR 430.3(n)(1) | OSA Publication | 1968 | Computation of Correlated Color Temperature and Distribution Temperature, A.R. Robertson, Journal of the Optical Society of America, Volume 58, Number 11, November 1968, pages 1528-1535 | Optical Society of America | |
Energy Department | 10 CFR 430.2, Definitions, Colored incandescent lamp (1) | CIE 13.3 | 1995 | Technical Report: Method of Measuring and Specifying Colour Rendering Properties of Light Sources | International Commission on Illumination | |
Coast Guard | 46 CFR 160.135-11(c)(2)(i)(B) | ASTM D 638 | 2008 | Standard Test Method for Tensile Properties of Plastics | ASTM International | |
Interior Department | 43 CFR 11.41(b) | DOI NRDAM/GLE | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments, Technical Documentation | U.S. Department of the Interior | |
Coast Guard | 21 CFR 145.145(a)(3)(iii) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 60.17(g)(59) | ASTM D 1475 | 1990 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (13) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/mass Spectrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(lii) | ASTM D 4658 | 2008 | Standard Test Method for Sulfide Ion in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(j) Table 3, C5 | ASTM E 729 | 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians | ASTM International | |
Environmental Protection Agency | 40 CFR 141.25(a) Table Note 6 | ASTM Annual Book of Standards | 2002 | ASTM Volume 11.01 | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.151 Table A | Drawing No. 921022-041 | 2001 | Neck Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 52, Subpart Y | MNSIP | 1979 | State of Minnesota Implementation Plan with Regulatory and Nonregulatory Revisions | State of Minnesota | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Pentachloronitrobenzene) | EPA Method 608.1 | 1993 | The Determination of Organochlorine Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272, Subpart S | KYHWMP | 2014 | Commonwealth of Kentucky Hazardous Waste Management Program (Reserved) | Commonwealth of Kentucky | |
Environmental Protection Agency | 40 CFR 75, Appendix A, Section 2.1.1.1(c) | ASTM D 5865 | 2010 | Standard Test Method for Gross Calorific Value of Coal and Coke | ASTM International | |
Rural Utilities Service | 7 CFR 1755.97(b)(17) | RUS Bulletin 1753F-153 (RUS Form 515d) | 2001 | Specifications and Drawings for Service Installations at Customer Access Locations | Rural Utilities Service, U.S. Department of Agriculture | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 665 | 1988 | Blanket Mineral Fiber Insulation | ASTM International |