This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization Sort ascending |
---|---|---|---|---|---|---|
Minerals Management Service | 30 CFR 250.1202(k)(1) | API MPMS | 1994 | Manual of Petroleum Measurement Standards | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1629(b)(4)(i) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(33) | API MPMS | 2003 | Chapter 9—Density Determination, Section 2—Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(34) | API MPMS | 2007 | Chapter 10—Sediment and Water, Section 1—Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(3) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(22) | API MPMS | 2007 | Chapter 6, Section 6 | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(f)(2) | API 12B | 1958 | Specification for Bolted Production Tanks | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.908(a) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.132(b)(1) | API 12F | 1994 | Specification for Shop Welded Tanks for Storage of Production Liquids | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.802(e)(4)(i) | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(50) | API MPMS | 2009 | Chapter 14.5/GPA Standard 2172-09; Calculation of Gross Heating Value, Relative Density, Compressibility and Theoretical Hydrocarbon Liquid Content for Natural Gas Mixtures for Custody Transfer | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.858(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.919(b)(2) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API MPMS | 1995 | Chapter 3, Section 2 | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(3) | API 12B | 1958 | Specification for Bolted Production Tanks | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.432(c) | API 2510 | 2001 | Design and Construction of LPG Installations | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(52) | API RP 2SK | 2008 | Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.264(b)(2) | API 2510 | 2001 | Design and Construction of LPG Installations | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.108(a) | API RP 2D | 2007 | Recommended Practice for Operation and Maintenance of Offshore Cranes | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(2) | API 570 | 2016 | Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.803(b)(9)(v) | API RP 14F | 2008 | Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(66) | ANSI/API RP 14B | 2015 | Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(7) | API RP 2A-WSD | 2000 | Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms—Working Stress Design | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 83 FR 49259 | 30 CFR 250.872 (a) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.125(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.125(a)(10) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(22) | API RP 2SM | 2007 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 265.195(f)(2) Note | API 1632 | 2015 | Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(58) | API RP 14F | 2008 | Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1202(a)(3)(iii) | API MPMS | 2013 | Chapter 5, Section 8 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 60.111(i) | API 2517 | 1980 | Evaporation Loss From External Floating-Roof Tanks | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1628(b)(3) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(18) | API MPMS | 2007 | Chapter 4—Proving Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(82) | ANSI/API Spec. 6A | 2010 | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21983 | 30 CFR 250.739 (a) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1903 | API RP 75 | 2008 | Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(86) | API MPMS | 1998 | Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 2—Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters; First Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(18) | API RP 2FPS | 2001 | Planning, Designing, and Constructing Floating Production Systems | American Petroleum Institute | |
Coast Guard | 46 CFR 56.01-2(c)(1) | API 607 | 1993 | Fire Test for Soft-Seated Quarter-Turn Valves, Manufacturing, Distribution and Marketing Department, Fourth Edition | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 172.102(c)(1) 144 | API 1604 | 1996 | Closures of Underground Petroleum Storage Tanks | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.106(e) | API 5L | 2004 | Specification for Line Pipe | American Petroleum Institute | |
Environmental Protection Agency | 85 FR 63394 | 40 CFR 61 | API MPMS 14.10, 2nd Edition | 2017 | Test Methods and Performance Specifications for Air Emission Sources | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(74) | ANSI/API Spec. 17J | 2008 | Specification for Unbonded Flexible Pipe, Third Edition, Contains API Monogram Annex as Part of U.S. National Adoption | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.3(c) B2 | API 6D | 2002 | Specification for Pipeline Valves | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API MPMS | 2001 | Chapter 3, Section 3 | American Petroleum Institute | |
Interior Department | 84 FR 21908 | 30 CFR 250 | API Std 65 | 2003 | Oil and Gas and Sulfur Operations in the Outer Continental Shelf-Blowout Preventer Systems and Well Control Revisions | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.1202(l)(4) | API MPMS | 1994 | Manual of Petroleum Measurement Standards | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1629(b)(4)(i) | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1629(b)(4)(v) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(35) | API MPMS | 2007 | Chapter 10—Sediment and Water, Section 2—Standard Test Method for Water in Crude Oil by Distillation | American Petroleum Institute |