This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Housing and Urban Development Department | 24 CFR 3280.703 | ANSI Z21.21/CSA 6.5 | 2000 | Automatic Valves for Gas Appliances | American National Standards Institute | |
Minerals Management Service | 30 CFR 250.1628(d)(4)(i) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.10.3(a) | SAE RM-66-04 | 1965 | Compatibility Fluid | Society of Automotive Engineers | |
Coast Guard | 40 CFR 1065.1010(e)(4) | ISO 3675 | 1998 | Crude petroleum and liquid petroleum products--Laboratory determination of density--Hydrometer method | International Organization for Standardization | |
Federal Motor Carrier Safety Administration | 49 CFR 393.55(b) | FMVSS 105 | 1998 | Hydraulic and Electric Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 54.01-35(b)(4) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (47) | EPA Method 253.2 | 1978 | Palladium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 12.10-7 | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Research and Special Programs Administration | 49 CFR 178.50(k)(3)(i) | ASTM E 8 | 1999 | Standard Test Methods for Tension Testing of Metallic Materials | ASTM International | |
Coast Guard | 33 CFR 127.003(b) | ANSI B16.5 | 1988 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63.3151(b) | ASTM D 1475 | 1998 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Federal Aviation Administration | 14 CFR 121.345(c)(1)(ii) | FAA TSO-C112 | 1986 | Air Traffic Control Radar Beacon System/Mode Select (ATCRBS/MODE S) Airborne Equipment | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.151-15(i) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(31) | ASTM D 4815 | 2013 | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID Footnote 10 | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (9) | AOAC Method 974.27 | 1990 | Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method | AOAC International | |
Environmental Protection Agency | 40 CFR 98.344(c)(1) | ASME MFC-3M | 2004 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi | American Society of Mechanical Engineers | |
Interior Department | 43 CFR 11.44(f) | DOI NRDAM/GLE | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments, Technical Documentation | U.S. Department of the Interior | |
Environmental Protection Agency | 40 CFR 60.485(g)(6) | ASTM D 4809 | 1995 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Methyl formate) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2400(b)(2) | WAUIC regulations | 1980 | Revised Code of Washington, chapter 43.21A (Bureau of National Affairs, 1980 Laws), entitled “Department of Ecology,” as amended by 1983 Washington Laws, Chapter 270 | State of Washington | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(f) | EPA SW-846-7471B | 2007 | Mercury In Solid Or Semisolid Waste (Manual Cold-Vapor Technique), Revision 2 | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 172.280(a) | ASTM E 28 | 1982 | Standard Test Method for Softening Point by Ring and Ball Apparatus | ASTM International | |
Rural Utilities Service | 7 CFR 1755.901(b) | IEEE C2 | 2007 | National Electrical Safety Code | Institute of Electrical and Electronics Engineers | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(4)(xiv) | NFPA 17 | 2002 | Standard for Dry Chemical Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 13.207 | IMO Resolution A.437 (XI) | 1979 | Training of Crews in Fire Fighting | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.111(a)(2) | Drawing No. 78051-90 | 1978 | Neck Assembly, Revision A | General Motors Corporation | |
Energy Department | 10 CFR 434.403.1 Table 403.1b | ARI 325 | 1993 | Ground Water-Source Heat Pumps (RS-28) | Air Conditioning and Refrigeration Institute | |
Coast Guard | 46 CFR 59.10-5(i) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 131.111(f) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Rural Utilities Service | 7 CFR 1728.202(d)(4) | AWPA P9 | 2006 | Standard for Solvents and Formulations for Organic Preservative Systems | American Wood Protection Association | |
Environmental Protection Agency | 40 CFR 63.750(b)(2) | ASTM E 260 | 1991 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. F, 3.2.2 | IEC 62301 | 2005 | Household electrical appliances—Measurement of standby power | International Electrotechnical Commission | |
Food and Drug Administration | 21 CFR 184.1195(b) | Food Chemicals Codex | 1981 | Calcium Citrate | National Academy Press | |
Consumer Product Safety Commission | 16 CFR 1615.4(a)(9) Footnote 3 | ASTM D 2654 | 1967 | Method of Test for Amount of Moisture in Textile Materials | ASTM International | |
Federal Aviation Administration | 14 CFR 71.5 | FAA Order 7400.9X | 2013 | Airspace Designations and Reporting Points | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (100) | APHA Method 6420 B | 2000 | Phenols by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.131(b)(1) Table | EPA Method 551.1 | 1995 | Determination of Chlorination Disinfection Byproducts, Chlorinated Solvents, and Halogenated Pesticides/Herbicides in Drinking Water by Liquid-Liquid Extraction and Gas Chromatography with Electron-Capture Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(24) | ASTM D 2382 | 1988 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(10)(iv), Table H-26 | ASME B&PV Code | 1952 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 75.1719-2(c)(2) | IEEE 32 | 1972 | Requirements, Terminology and Test Procedures for Neutral Grounding Devices | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 80.46(e) | ASTM D 3606 | 2010 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography | ASTM International | |
Coast Guard | 33 CFR 183.540(a) | SAE J-1527 | 1985 | Marine Fuel Hoses | Society of Automotive Engineers | |
Coast Guard | 46 CFR 64.11(a) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section VIII, Division 1 with Addenda Issued December 31, 1989 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(40) | ANSI K13.1 | 1967 | Identification of Gas Mask Containers | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (64) | EPA Method 120.1 | 1982 | Conductance (Specific Conductance, umhos at 25 degrees C) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 10 | EPA Method 100.2 | 1994 | Determination of Asbestos Structure Over 10-?m In Length In Drinking Water, EPA-600-R-94-134 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41c Natural gas (2) | ASTM D 1835 | 1987 | Standard Specification for Liquefied Petroleum (LP) Gases | ASTM International | |
Environmental Protection Agency | 40 CFR 75.6(f)(1) | API MPMS | 1995 | Chapter 3, Section 4 | American Petroleum Institute | |
Mine Safety and Health Administration | 40 CFR 1065.715 Table 1 Note 1 | ASTM D 1945 | 2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International |