This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.111(d)(1)(ii) | API 620 | 1970 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (27) | ASTM D 1126 | 2007 | Standard Test Method for Hardness in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (18) Nitrate | APHA Method 4500-NO3 F | 2000 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(b)(2) | AGA Report No. 3, Part 2 | 2000 | Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 2: Specification and Installation Requirements | American Gas Association | |
Federal Aviation Administration | 14 CFR 135.168(F)(2)(i) | RTCA DO-204 | 1989 | Minimum Operational Performance Standards (MOPS) 406 MHz Emergency Locator Transmitters (ELTs) | Radio Technical Commission for Aeronautics | |
Coast Guard | 33 CFR 142.30(a) | ANSI Z89.1 | 1981 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Minerals Management Service | 30 CFR 250.1203(b)(2)(iv) | AGA Report No. 10 | 2003 | Speed of Sound in Natural Gas and Other Related Hydrocarbon Gases | American Gas Association | |
Coast Guard | 46 CFR 120.340(o) | NFPA 70 | 1987 | National Electrical Code (NEC) Section 310-15 | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.6.5.1.2 | ASTM C 150 | 1977 | Standard Specification for Portland Cement | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 180.411(b) | CGA C-6 | 1993 | Standard for Visual Inspection of Steel Compressed Gas Cylinders | Compressed Gas Association | |
Coast Guard | 33 CFR 183.5(b) | SAE J-557 | 1968 | High Tension Ignition Cable | Society of Automotive Engineers | |
Research and Special Programs Administration | 49 CFR 179.201-4 | ASTM A 262 | 1993 | Standard Practice for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | ASTM International | |
Rural Utilities Service | 7 CFR 1755.870(g)(5)(ii) | ASTM D 2436 | 1985 | Standard Specification for Forced-Convection Laboratory Ovens for Electrical Insulation | ASTM International | |
Food and Drug Administration | 21 CFR 102.23(c)(2) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 1110 A | 2004 | Corrosivity Toward Steel | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.68(c) | FMVSS 304 | 1998 | Compressed Natural Gas Fuel Container Integrity | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 54.30-5(a)(6) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (50) | ASTM D 515A | 1988 | Test Methods for Phosphorus in Water (Withdrawn 1997) | ASTM International | |
Coast Guard | 46 CFR 160.077-5(b) | UL 1191 | 1995 | Standard for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Food and Drug Administration | 21 CFR 177.1637(b)(2) | ECC Method ECD-A-AC-G-V-1-5 | 1988 | Determination of Dilute Solution Viscosity of Polyesters | Eastman Chemical Company | |
Consumer Product Safety Commission | 16 CFR 1201.7(c)(1) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Coast Guard | 46 CFR 160.151-21(d) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.655(d)(2)(ii)(C) | ASTM D 4629 | 2012 | Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(v)(G) | EPA Method 525.1 | 1988 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (11) | AOAC Method 974.27 | 1990 | Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method | AOAC International | |
Environmental Protection Agency | 40 CFR 98, Subpart I, Appendix A, (a)(6) | EPA-430-R-10-003 | 2010 | Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1 | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 146.185(b)(2)(i) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 63.14(c)(1) | AOAC Method 929.01 | 1995 | Sampling of Solid Fertilizers, Sixteenth Edition | AOAC International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Toluene) | ASTM D 4763 | 1988 | Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 147.2500(b)(3) | WIUIC regulations | 1974 | Chapter 162, Pure Drinking Water, Wisconsin Statutes Annotated (West 1974 and Supp. 1983) | State of Wisconsin | |
Environmental Protection Agency | 40 CFR 63.11647(a)(1)(ii) | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 726 | 1988 | Standard Specification for Mineral Fiber and Roof Insulating Board | ASTM International | |
Environmental Protection Agency | 40 CFR 94.5(a)(6) | ASTM D 613 | 2001 | Standard Test Method for Cetane Number of Diesel Fuel Oil | ASTM International | |
Federal Communications Commission | 47 CFR 15.109(g)(2) | IEC CISPR Publication 22 | 1997 | Information Technology Equipment--Radio Disturbance Characteristics--Limits and Methods of Measurement | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 92.305(a) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
National Highway Traffic Safety Administration | 10 CFR 52 App. A | DOE Publication | 1997 | Tier 1, Tier 2, and Generic Technical Specifications | General Electric Co. | |
Environmental Protection Agency | 40 CFR 194.5(a)(1) | NUREG 1297 | 1988 | Peer Review for High Level Nuclear Waste Repositories | U.S. Nuclear Regulatory Commission | |
Mine Safety and Health Administration | 30 CFR 77.901(c) | NFPA 70 | 2013 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 125.180(b) | ABYC E-8 | 1994 | Alternating-Current (AC) Electrical Systems on Boats | American Boat and Yacht Council | |
National Highway Traffic Safety Administration | 49 CFR 572.113 | Drawing No. 78051-94 | 1978 | Neck Assembly | General Motors Corporation | |
Coast Guard | 40 CFR 136.3(a) Table ID (1) | EPA Method 608 | 1982 | Organochlorine Pesticides & PCBs by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 | ASTM D 2015 | 1978 | Standard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter | ASTM International | |
Food and Drug Administration | 21 CFR 184.1259(b)(3) | Food Chemicals Codex | 1996 | Heavy Metals Test | National Academy Press | |
Coast Guard | 33 CFR 126.15(a)(9) | NFPA 307 | 1995 | Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 91 Special Aviation Regulation 108 (9) | TAS Publication | 2013 | Mitsubishi Heavy Industries MU-2B Checklists | Turbine Aircraft Services | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (104) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(b)(1) Table Note 2 | APHA Standard Methods, 20th Edition | 1998 | Standard Methods for the Examination of Water and Wastewater. 20th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(40) | ASTM D 3588 | 2003 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density (Specific Gravity) of Gaseous Fuels | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.135(b)(1)(ii) | ANSI Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 75.333(e)(3) | ASTM E 162 | 1987 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source | ASTM International |