This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 40 CFR 60.111(b) | ASTM D 975 | 1996 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IB Footnote 52 | EPA Method 300.1-1 | 1994 | Methods for the Determination of Metals in Environmental Samples, Supplement I, EPA/600/R-94/111 | U.S. Environmental Protection Agency | |
Coast Guard | 21 CFR 161.173(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 56.50-105 Table | ASTM A 334/A 334M | 1996 | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(57) | ASTM B 165 | 1993 | Standard Specification for Nickel-Copper Alloy Seamless Pipe and Tube | ASTM International | |
Coast Guard | 46 CFR 110.10-1(o)(9) | UL 514C | 1988 | Standard for Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 1065.1010(e)(5) | ISO 3733 | 1999 | Petroleum products and bituminous materials-- Determination of water--Distillation method | International Organization for Standardization | |
Coast Guard | 46 CFR 160.043-2(a) | DWG. No. 160.043-1(b) | 2012 | Jackknife (With Can Opener) | U.S. Coast Guard | |
Coast Guard | 33 CFR 127.405(b) | NFPA 59A | 1994 | Standard for the Production, Storage and Handling of Liquefied Natural Gas (LNG) | National Fire Protection Association | |
Coast Guard | 46 CFR 129.320(e) | NFPA 70 | 1987 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 56.10-5(b) | ASTM A 53 | 1998 | Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless | ASTM International | |
Coast Guard | 33 CFR 157.02(b)(5) | IMO Marine Environment Protection Committee Resolu | 2003 | Revised Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers | International Maritime Organization | |
Coast Guard | 46 CFR 111.54-1(c)(1)(i) | IEEE C37.13 | 1990 | Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 12.05-7(a)(5) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 111.105-9 | IEC 60079-1 | 2001 | Electrical Apparatus for Explosive Gas Atmospheres—Part 1: Flameproof Enclosures “d” including corr.1, Fourth Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 125.180(b) | NFPA 1963 | 1993 | Fire Hose Connections | National Fire Protection Association | |
Coast Guard | 46 CFR 175.600(b) Table | NFPA 17 | 1994 | Standard for Dry Chemical Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 40 CFR 60.485(e)(1) | ASTM D 2879 | 1996 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Coast Guard | 46 CFR 118.425(b) | NFPA 17 | 1994 | Dry Chemcial Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 148.205(b)(2) | UN Manual of Tests and Criteria | 2009 | Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, Fifth revised edition | United Nations | |
Coast Guard | 46 CFR 39.2009(a)(3) | ASTM F 1271 | 1989 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protection Applications | ASTM International | |
Coast Guard | 7 CFR 1755.508(i) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 52.01-140(a) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 60.593a(d) | ASTM D 86 | 1990 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Coast Guard | 46 CFR 12.03-1(b) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 160.005-4(f) | Drawing No. 160.005-1 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Adult) | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.151-21(b) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.055-3(j), Table 160.055-3(j) | Federal Standard CCC-T-191 | 1978 | Textile Test Method 5304 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 129.120(a)(1) | ABYC E-1 | 1972 | Bonding of Direct Current Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 169.703(a) | ABYC A-3 | 1970 | Recommended Practices and Standards Covering Galley Stoves | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.077-19(c)(3)(iii) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 177.300(c)(1) | Lloyd's Publication | 1998 | Rules and Regulations for the Classification of Yachts and Small Craft | Lloyd's Register of Shipping | |
Coast Guard | 21 CFR 172.809(b) | TCI Publication | 1996 | Analytical Methods for Specification Tests for Curdlan | Takeda Chemical Industries, Ltd. | |
Coast Guard | 46 CFR 160.132-13(g)(1) | IMO MSC/Circular 980 | 2001 | Standardized Life-Saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
Coast Guard | 40 CFR 136.3(a) Table IB (37) | ASTM D 1886C | 1998 | Standard Test Methods for Nickel in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
Coast Guard | 46 CFR 25.01-3(b) | ABYC A-1 | 1978 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.135-7(b)(3)(ii) | ASTM A 276 | 2008 | Standard Specification for Stainless Steel Bars and Shapes | ASTM International | |
Coast Guard | 46 CFR 160.151-27(c)(1) | IMO Revised recommendation on testing | 2010 | Revised recommendation on testing of life-saving appliances | International Maritime Organization | |
Coast Guard | 46 CFR 154.1400(c)(7) | ANSI Z87.1 | 1979 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Coast Guard | 46 CFR 164.018-5(a)(3) | FedSpec CCC-C-426D | 1970 | Cloth, Drill, Cotton | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.156-7(b)(3)(ii) | ASTM A 313/A 313M | 2008 | Standard Specification for Stainless Steel Spring Wire | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table ID (1) | ASTM D 5812 | 2002 | Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 164.018-11(d)(2) | FedSpec CCC-C-443E | 1974 | Cloth, Duck, Cotton (Single and Plied Filling Yarns, Flat) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 38.01-3(b) | ASNT RP SNT-TC-1A | 1988 | Personnel Qualification and Certification for Nondestructive Testing | American Society for Nondestructive Testing | |
Coast Guard | 46 CFR 160.170-13(g)(1) | IMO MSC/Circular 980 | 2001 | Standardized Life-saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
Coast Guard | 40 CFR 136.3(a) Table IF (Benzene) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 162.161-5(b)(1) | UL 2166 | 2001 | Standard for Safety for Halocarbon Clean Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.077-11(a)(7)(ii) | ASTM B 117 | 1997 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Coast Guard | 46 CFR 164.023-3(b)(1) | Federal Standard 191A | 1978 | Method 4010, Length-Weight Relation; Thread; Yards Per Pound (m/kg) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 56.01-2(k)(2) | MSS SP-9 | 2001 | Spot Facing for Bronze, Iron and Steel Flanges | Manufacturers Standardization Society of the Valve and Fittings Industry |