DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Securities and Exchange Commission | 88 FR 4083 | 17 CFR 232 | EDGAR Filer Manual, v. II, ver. 64 | 2022 | Adoption of Updated EDGAR Filer Manual | Securities and Exchange Commission |
Securities and Exchange Commission | 17 CFR 270.17f-4(c)(1) | Uniform Commercial Code | 2002 | 2002 Official Text and Comments, Sections 8–102, 8–103, and 8–501 through 8–511 | National Conference of Commissioners on Uniform State Laws | |
Securities and Exchange Commission | 86 FR 25803 | 17 CFR 249 | EDGAR Filer Manual, Vol. II, Ver. 57 | 2021 | Adoption of Updated EDGAR Filer Manual, Form ID Amendments | Securities and Exchange Commission |
Securities and Exchange Commission | 17 CFR 232.301 | EDGAR Filer Manual | 2009 | Guide for Electronic Filing with the U.S. Securities and Exchange Commission, EDGAR Filer Manual, Volume I | Securities and Exchange Commission | |
Securities and Exchange Commission | 86 FR 25803 | 17 CFR 239 | EDGAR Filer Manual, Vol. II, Ver. 57 | 2021 | Adoption of Updated EDGAR Filer Manual, Form ID Amendments | Securities and Exchange Commission |
Securities and Exchange Commission | 88 FR 45814 | 17 CFR 232 | EDGAR Manual | 2023 | Adoption of Updated EDGAR Filer Manual | Securities and Exchange Commission |
Securities and Exchange Commission | 87 FR 42960 | 17 CFR 232 | EDGAR Filer Manual, Vol. II, Ver. 62 | 2022 | Adoption of Updated EDGAR Filer Manual | Securities and Exchange Commission |
Securities and Exchange Commission | 17 CFR 232.301 | EDGAR Filer Manual | 2009 | Guide for Electronic Filing with the U.S. Securities and Exchange Commission, EDGAR Filer Manual, Volume II | Securities and Exchange Commission | |
Securities and Exchange Commission | 17 CFR 232.301 | EDGAR Filer Manual | 2005 | Guide for Electronic Filing with the U.S. Securities and Exchange Commission, Volume III--EDGAR ONLINEFORMS Filer Manual | Securities and Exchange Commission | |
Securities and Exchange Commission | 88 FR 36002 | 17 CFR 229 | EDGAR Filer Manual | 2022 | Share Repurchase Disclosure Modernization | Securities and Exchange Commission |
Securities and Exchange Commission | 86 FR 25803 | 17 CFR 232 | EDGAR Filer Manual, Vol. I, Ver. 37 | 2021 | Adoption of Updated EDGAR Filer Manual, Form ID Amendments | Securities and Exchange Commission |
Securities and Exchange Commission | 88 FR 36002 | 17 CFR 232 | EDGAR Filer Manual | 2022 | Share Repurchase Disclosure Modernization | Securities and Exchange Commission |
Securities and Exchange Commission | 86 FR 25803 | 17 CFR 239 | EDGAR Filer Manual, Vol. I, Ver. 37 | 2021 | Adoption of Updated EDGAR Filer Manual, Form ID Amendments | Securities and Exchange Commission |
Securities and Exchange Commission | 88 FR 36002 | 17 CFR 240 | EDGAR Filer Manual | 2022 | Share Repurchase Disclosure Modernization | Securities and Exchange Commission |
Securities and Exchange Commission | 86 FR 55689 | 17 CFR 232 | EDGAR Filer Manual, Vol. I, Ver. 39 | 2021 | Adoption of Updated EDGAR Filer Manual, Form ID Amendments | Securities and Exchange Commission |
Securities and Exchange Commission | 86 FR 25803 | 17 CFR 249 | EDGAR Filer Manual, Vol. I, Ver. 37 | 2021 | Adoption of Updated EDGAR Filer Manual, Form ID Amendments | Securities and Exchange Commission |
Securities and Exchange Commission | 88 FR 36002 | 17 CFR 249 | EDGAR Filer Manual | 2022 | Share Repurchase Disclosure Modernization | Securities and Exchange Commission |
Securities and Exchange Commission | 88 FR 4083 | 17 CFR 232 | EDGAR Filer Manual, v. I, ver. 41 | 2022 | Adoption of Updated EDGAR Filer Manual | Securities and Exchange Commission |
Securities and Exchange Commission | 86 FR 55689 | 17 CFR 239 | EDGAR Filer Manual, Vol. II, Ver. 59 | 2021 | Adoption of Updated EDGAR Filer Manual, Form ID Amendments | Securities and Exchange Commission |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(38) | API MPMS | 2003 | Chapter 12, Section 2, Part 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(2) | ACI 357-R | 1984 | Guide for the Design and Construction of Fixed Offshore Concrete Structures | American Concrete Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(17) | ASTM C 150 | 2007 | Standard Specification for Portland Cement | ASTM International | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(30) | API MPMS | 1995 | Chapter 8—Sampling, Section 1—Standard Practice for Manual Sampling of Petroleum and Petroleum Products | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(94) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(1)(v) | API RP 500 | 2012 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(n)(1) | COS Safety Publication COS-2-01 | 2012 | Qualification and Competence Requirements for Audit Teams and Auditors Performing Third-party SEMS Audits of Deepwater Operations, First Edition | Center for Offshore Safety | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(45) | API MPMS | 2006 | Chapter 20, Section 1 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.803(b)(1) | API 510 | 2006 | Pressure Vessel Inspection Code | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(46) | API MPMS | 2009 | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 4—Calculation of Base Prover Volumes by the Waterdraw Method | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(h)(3) | AWS D3.6M:1999 | 1999 | Specification for Underwater Welding | American Welding Society |
Safety and Environmental Enforcement Bureau | 30 CFR 250.852(e)(1) | ANSI/API Spec. 17J | 2008 | Specification for Unbonded Flexible Pipe | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(50) | API RP 2I | 2008 | In-Service Inspection of Mooring Hardware for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(62) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(30) | API MPMS | 2007 | Chapter 10, Section 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(d)(1) | ANSI/ASME B 16.5-2003 | 2003 | Pipe Flanges and Flanged Fittings | American National Standards Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(62) | API RP 2RD | 1998 | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(3) | ANSI/AISC 360-05 | 2005 | Specification for Structural Steel Buildings | American National Standards Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.869(a)(3) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(66) | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(12) | API MPMS | 2005 | Chapter 4, Section 4 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(14) | API MPMS | 1998 | Chapter 4—Proving Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(78) | API RP 500 | 2012 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(19) | ASTM C 595-08 | 2008 | Standard Specification for Blended Hydraulic Cements | ASTM International | |
Safety and Environmental Enforcement Bureau | 83 FR 49262 | 30 CFR 250.880(c)(3)(i) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21979 | 30 CFR 250.733(b)(2) | API RP 2RD | 1998 | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(74) | ISO 13628-2:2006 | 2006 | Petroleum and natural gas industries—Design and operation of subsea production systems—Part 2: Unbonded flexible pipe systems for subsea and marine application | International Organization for Standardization | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.415(f) | API Standard 65 | 2010 | Part 2, Isolating Potential Flow Zones During Well Construction, Second Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(39) | API MPMS | 2003 | Chapter 14, Section 3, Part 1 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(e)(3) | ACI 357-R | 1997 | Guide for the Design and Construction of Fixed Offshore Concrete Structures | American Concrete Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(i)(3) | ASTM C 150 | 2007 | Standard Specification for Portland Cement | ASTM International |