| Occupational Safety and Health Administration |
|
29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) |
ASTM D1048 |
2012 |
Standard Specification for Rubber Insulating Blankets
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.106(j)(6)(ii) |
NFPA 35 |
1970 |
Standard for the Manufacture of Organic Coatings
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1926.1433(c)(2)(ii) |
SAE J-987 |
2003 |
Lattice Boom Cranes—Method of Test
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.110(h)(2), Table H-34 |
ASME B&PV Code |
1962 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.137(c)(2)(ix) Note to paragraph (c)(2)(ix) |
ASTM D1050 |
2005 |
Standard Specification for Rubber Insulating Line Hose.
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.135(b)(2) |
ANSI Z89.1 |
2003 |
Safety Requirements for Industrial Head Protection
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.269 Appendix G |
IEEE 1584 |
2002 |
Guide for Performing Arc-Flash Hazard Calculations
|
Institute of Electrical and Electronics Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.261(a)(3)(vi) |
ANSI B31.1.0 |
1967 |
Code for Pressure Piping
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(55) |
ANSI Z21.30 |
1964 |
Requirements for Gas Appliances and Gas Piping Installations
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.119, Appendix D |
API RP 2220 |
1991 |
Improving Owner and Contractor Safety Performance
|
American Petroleum Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.266(f)(3)(iii) |
SAE J-231 |
1981 |
Minimum Performance Criteria for Falling Object Protective Structures (FOPS)
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart S Appendix A |
ASTM D3176 |
2002 |
Ultimate Analysis of Coal and Coke
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(z)(2) |
UN ST/SG/AC.10/Rev.4 |
2003 |
UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, Fourth Revised Edition
|
United Nations |
| Occupational Safety and Health Administration |
|
29 CFR 1917.119(c) |
ANSI A14.5 |
1992 |
Safety Requirements for Portable Reinforced Plastic Ladders
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(15) |
ASTM D86 |
2007 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1926.552(d) |
ANSI A17.1a |
1967 |
Safety Code for Elevators, Dumbwaiters and Moving Walks
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.269(u)(5) Note |
ANSI C2 |
1987 |
National Electrical Safety Code
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(j)(1) |
ASTM A370 |
1968 |
Methods and Definitions for Mechanical Testing of Steel Products
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) |
ASTM F819 |
2010 |
Standard Terminology Relating to Electrical Protective Equipment for Workers
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(u)(5) |
SAE J-765 |
1961 |
Recommended Practice for Crane Loading Stability Test Code
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(1)(vii) |
ANSI Z87.1 |
1998 |
Practice for Occupational and Educational Eye and Face Protection
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1915.507(d)(5) |
NFPA 2001 |
2004 |
Standard on Clean Agent Fire Extinguishing Systems
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.159(a)(2) |
NFPA 13 |
2013 |
Automatic Sprinkler Systems
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1917.44(n)(5)(i) |
NHTSA Publication |
2014 |
Safety Precautions for Mounting and Demounting Tube-Type Truck/Bus Tires
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(aa)(2) |
PCSA 2 |
1968 |
Mobile Hydraulic Crane Standards
|
Power Crane and Shovel Association |
| Occupational Safety and Health Administration |
|
29 CFR 1926.102 (b)(iii) |
ANSI Z87.1-1989 (R-1998) |
1998 |
Practice for Occupational and Educational Eye and Face Protection
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.105 |
CGA G-8.1 |
1964 |
Standard for Installation of Nitrous Oxide Systems at Consumer Sites
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1926.152(i)(1)(iii)(A)(1) |
UL 142 |
1968 |
Standard for Steel Aboveground Tanks for Flammable and Combustible Liquids
|
Underwriters Laboratories, Inc. |
| Occupational Safety and Health Administration |
|
29 CFR 1910.110(b)(13)(ii)(B)(1) |
ASTM B88 |
1969 |
Standard Specification for Seamless Copper Water Tube
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1926.1440(c)(3) |
ASME B30.14, Section 14-1.5 |
2004 |
Side Boom Tractors, Ropes and Reeving Accessories
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.111(b)(2)(vi) |
ASME B&PV Code |
1952 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.68(b)(12) |
29 CFR 1910.27 |
2014 |
Safety Requirements for Fixed Ladders
|
Occupational Safety and Health Administration, U.S. Department of Labor |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(b)(1)(iii)(B) |
ANSI Addenda B31.1 |
1969 |
Addenda to Code for Pressure Piping
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.178(f)(2) |
NFPA 58 |
1969 |
Standard for the Storage and Handling of Liquefied Petroleum Gases
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.261(f)(5) |
ANSI Z33.1 |
1961 |
Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.67(b)(2) |
ANSI A92.2 |
1969 |
Standard for Vehicle Mounted Elevating and Rotating Work Platforms
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.94(c)(3)(i) |
29 CFR 1910.107(b)(6) |
2014 |
Spray finishing using flammable and combustible materials; Spray booths
|
U.S. Department of Labor |
| Occupational Safety and Health Administration |
|
29 CFR 1926.1000(f)(3) |
DOI/BOR Publication |
1971 |
Safety and Health Regulations for Construction, Part II
|
Bureau of Reclamation, U.S. Department of Interior |
| Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart S Appendix A |
ANSI/API RP 500 |
2002 |
Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I Division 1 and Division 2
|
American Petroleum Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.602(b)(3) |
PCSA 2 |
1968 |
Mobile Hydraulic Crane Standards
|
Power Crane and Shovel Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(7) |
NFPA 36 |
1967 |
Standard for Solvent Extraction Plants
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(5) |
ASME B&PV Code |
1969 |
Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels, Including Addenda
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart S Appendix A |
ANSI/ASSE Z490.1 |
2001 |
Criteria for Accepted Practices in Safety, Health, and Environmental Training
|
American Society of Safety Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(w)(3) |
UL 142 |
1968 |
Steel Aboveground Tanks for Flammable and Combustible Liquids
|
Underwriters Laboratories, Inc. |
| Occupational Safety and Health Administration |
|
29 CFR 1910.268(j)(4)(iv)(E) |
ANSI B30.6 |
1969 |
Safety Code for Derricks
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(4) |
ASTM A391 |
1965 |
Alloy Steel Chain
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.110(b)(8)(ii) Table H-24 Footnote 1 |
ANSI H23.1 |
1970 |
Standard Specification for Seamless Copper Water Tube
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(7) |
ANSI A17.1b |
1968 |
Elevators, Dumbwaiters, Escalators, and Moving Walks Supplement
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(ee)(1) |
USACE EM-385-1-1 |
1967 |
General Safety Requirements
|
Department of the Army, U.S. Army Corps of Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.104(b)(4)(ii) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VIII, Paragraph UG-84
|
American Society of Mechanical Engineers |