This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 170.245(b)(9) | MIL-P-21929B | 1991 | Plastic Material, Cellular Polyurethane, Foam-in-Place, Rigid (2 Pounds per Cubic Foot | U.S. Department of Defense | |
Coast Guard | 46 CFR 53.01-3(a) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 131.203(e) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 160.077-5(b) | ASTM D 751 | 1995 | Standard Test Methods for Coated Fabrics | ASTM International | |
Coast Guard | 46 CFR 58.03-1(g)(9) | ASTM D 323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Coast Guard | 46 CFR 25.45-1(d) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Coast Guard | 46 CFR 56.50-40(a)(1) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 136.3(a) Table IB Footnote 18 | NCASI Technical Bulletin 253 | 1971 | An Investigation of Improved Procedures for Measurement of Mill Effluent and Receiving Water Color | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
Coast Guard | 46 CFR 56.70-15(c) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 113.25-6 | IMO SOLAS | 2001 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-58 | 1993 | Pipe Hangers and Supports -- Materials, Design and Manufacture | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 128.240(b)(2) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section I | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 60, Appendix A-7, Method 24, Section 6.1 | ASTM D 1475 | 1980 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Coast Guard | 46 CFR 184.240(g) | ABYC A-1 | 1993 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 116.405(j)(2) | IMO Resolution A.688(17) | 1991 | Fire Test Procedures for Ignitability of Bedding Components | International Maritime Organization | |
Coast Guard | 46 CFR 12.30-5 | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 56.60-15(b)(2) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 111.75-20(e) | UL 1598A | 2000 | Standard for Supplemental Requirements for Luminaires for Installation on Marine Vessels, First Edition | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 136.3(a) Table IB Footnote 52 | EPA Method 300.1-1 | 1994 | Methods for the Determination of Metals in Environmental Samples, Supplement I, EPA/600/R-94/111 | U.S. Environmental Protection Agency | |
Coast Guard | 21 CFR 173.400(c)(2)(ii) | FDA Publication | 1990 | Colorimetric Determination of Residual Quaternary Ammonium Compounds (Arquad HTL8) in Sugar and Sugar Solutions | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 92.07-1(c) | IMO SOLAS | 2001 | International Convention for the Safety of Life at Sea (SOLAS), Consolidated Text of SOLAS, and its Protocol of 1988 | International Maritime Organization | |
Coast Guard | 46 CFR 119.440(a)(3) | UL 1102 | 1992 | Non Integral Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
Coast Guard | 29 CFR 1926.6(h)(2) | ANSI A10.4 | 1963 | Safety Requirements for Workmen's Hoists | American National Standards Institute | |
Coast Guard | 46 CFR 58.10-5(b)(3)(i) | UL 1111 | 1988 | Marine Carburetor Flame Arresters | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 110.10-1(o)(9) | UL 514C | 1988 | Standard for Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.043-2(a) | DWG. No. 160.043-1(b) | 2012 | Jackknife (With Can Opener) | U.S. Coast Guard | |
Coast Guard | 46 CFR 153.933(a), Note | ACGIH Publication | 1987 | Guidelines for the Selection of Chemical Protective Clothing, Third Edition | American Conference of Governmental Industrial Hygienists | |
Coast Guard | 33 CFR 127.1203(a) | ANSI S12.13 | 1986 | Performance Requirements for Combustible Gas Detectors | American National Standards Institute | |
Coast Guard | 46 CFR 154.1435 | IMO Publication | 2020 | Medical First Aid Guide for Use in Accidents Involving Dangerous Goods | International Maritime Organization | |
Coast Guard | 46 CFR 114.600(b) | ABYC A-7 | 1970 | Recommended Practices and Standards Covering Boat Heating Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 125.180(b) | UL 1570 | 1995 | Fluorescent Lighting Fixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 60.17(g)(188) | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Coast Guard | 46 CFR 110.10-1(h)(1) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea and all amendments through 2002 | International Maritime Organization | |
Coast Guard | 33 CFR 157.02(b)(5) | IMO Marine Environment Protection Committee Resolu | 2003 | Revised Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers | International Maritime Organization | |
Coast Guard | 7 CFR 1728.201(j)(4) | AWPA A9 | 2001 | Standard Method for Analysis of Treated Wood and Treating Solutions by X-ray Spectroscopy | American Wood Protection Association | |
Coast Guard | 46 CFR 154.1(b) | IMO Publication | 1976 | Code For Existing Ships Carrying Liquefied Gases in Bulk | International Maritime Organization | |
Coast Guard | 46 CFR 161.002-1(b) | FM Class No. 3210 | 1978 | Thermostats for Automatic Fire Detection | Factory Mutual Engineering and Research | |
Coast Guard | 46 CFR 160.010-3(a)(5) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-21(k) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 56.60-15(b) | ASTM A 395/A 395M | 1998 | Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures | ASTM International | |
Coast Guard | 46 CFR 160.055-5(c)(1) | Drawing No. 160.055-1B, Sheet 2 | 2012 | Life Preservers, Unicellular Foam, Child, Buoyant Inserts, Model 63 | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.171-3(b) | Federal Standard 191A | 1971 | Textile Test Methods, Method 5304.1, Abrasion Reistance of Cloth, Oscillatory Cylinder (Wyzenbek) Method | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 119.440(a)(1) Table 119.440(a)(1) | ASTM B 152 | 1997 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar | ASTM International | |
Coast Guard | 46 CFR 169.629 | ABYC H-2.5 | 1981 | Ventilation of Boats Using Gasoline | American Boat and Yacht Council | |
Coast Guard | 46 CFR 56.50-105 Table | ASTM A 194 | 1998 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service or Both | ASTM International | |
Coast Guard | 46 CFR 169.115(c)(1) | ABYC P-1 | 1973 | Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.077-19(c)(9) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 62.35-40(c) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels, Part 4 Vessel Systems and Machinery | American Bureau of Shipping | |
Coast Guard | 46 CFR 160.047-1(b) | Drawing No. 160.047-1, Sheet 4, Rev. 1 | 2012 | Buoyant Vest, Kapok or Fibrous Glass, Adult and Child—Pad Patterns | ASTM International | |
Coast Guard | 46 CFR 160.133-5(b)(4) | ASTM A 314 | 2008 | Standard Specification for Stainless Steel Billets and Bars for Forging | ASTM International |