DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 21 CFR 177.1520(d)(1) | ASTM D 1505 | 1979 | Standard Test Method for Density of Plastics by the Density-Gradient Technique | ASTM International | |
Coast Guard | 46 CFR 56.01-2(d)(8) | ASME B16.9 | 2003 | Factory-Made Wrought Steel Buttwelding Fittings | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 102.23(c)(7) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 160.055-1(a)(1) | MIL-W-17337D | 1998 | Webbing, Woven, Nylon | U.S. Department of Defense | |
Coast Guard | 46 CFR 162.050-39 | ISO 9377-2 | 2000 | Water Quality—Determination of hydrocarbon oil index—Part 2: Method using solvent extraction and gas chromatography | International Organization for Standardization | |
Coast Guard | 46 CFR 111.107-1(b) | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Coast Guard | 46 CFR 161.002-4(b)(1) | UL 521 | 1993 | Heat Detectors for Fire Protective Signaling Systems | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 164.120-5(b)(8) | ASTM D 1824 | 2002 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates | ASTM International | |
Coast Guard | 46 CFR 15.103(d) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 162.050-15(f)(1) | ASTM D 2777 | 1998 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D-19 on Water | ASTM International | |
Coast Guard | 46 CFR 160.174-3(b) | ASTM C 177 | 1993 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
Coast Guard | 33 CFR 157.430(a) | IMO Resolution A.744(18) | 1993 | Guidelines on the Enhanced Program of Inspections During Surveys of Bulk Carriers and Oil Tankers | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2)(iv) | ASTM D 695 | 2008 | Standard Test Method for Compressive Properties of Rigid Plastics | ASTM International | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(F) | EPA-600-4-90-020 | 1990 | Methods for the Determination of Organic Compounds in Drinking Water, Supplement 1 | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 183.440(a) | SAE J-557 | 1968 | High Tension Ignition Cable | Society of Automotive Engineers | |
Coast Guard | 46 CFR 180.10 | IMO SOLAS | 2001 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 46 CFR 56.25-7 | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 97.15-55(a) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 52.01-140(b)(3) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 2 | ASME SA-675 | 1998 | Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties 1998 DHS/USCG | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 27.102(b) | NFPA 750 | 2003 | Standard on Water Mist Fire Protection Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F 1006 | 1992 | Standard Specification for Entrainment Separators for Use in Marine Piping Applications | ASTM International | |
Coast Guard | 40 CFR 444.12(b)(1) Table (11) | USGS I-3900-85 | 1985 | Zinc by Flame Atomic Absorption | U.S. Geological Survey | |
Coast Guard | 46 CFR 80.20(a) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 24 CFR 200.925c(c)(3) | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 56.01-2(e)(75) | ASTM F 1139 | 2010 | Standard Specification for Steam Traps and Drains | ASTM International | |
Coast Guard | 40 CFR 60.106(j)(2) | ASTM D 129 | 1995 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Coast Guard | 33 CFR 164.03(b) | IMO Resolution A.342 (IX) | 1975 | Recommendations on Performance Standards for Automatic Pilots | International Maritime Organization | |
Coast Guard | 46 CFR 160.051-7(b) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Coast Guard | 33 CFR 154, Appendix B, 8.4 | ASTM F 722 | 1982 | Standard Specification for Welded Joints for Shipboard Piping Systems | ASTM International | |
Coast Guard | 45 CFR 162.1603(a)(5) | CAQH Publication | 2012 | Phase III CORE 370 EFT & ERA Reassociation (CCD+/835) Rule, version 3.0.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Coast Guard | 46 CFR 54.30-10(a)(1) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 164.74(a)(3)(ii) | API 9A | 1984 | Specification for Wire Rope, Section 3, Properties and Tests for Wire and Wire Rope | American Petroleum Institute | |
Coast Guard | 46 CFR 110.10-1(n)(2) | MIL-HDBK-299(SH) | 1989 | Military Handbook Cable Comparison Handbook Data Pertaining to Electric Shipboard Cable Notice 1-1991 (Revision of MIL-HDBK-299(SH)) | Naval Sea Systems Command | |
Coast Guard | 46 CFR 125.180(b) | ABYC A-7 | 1970 | Recommended Practices and Standards Covering Boat Heating Systems | American Boat and Yacht Council | |
Coast Guard | 40 CFR 60.335(b)(10)(ii) | ASTM D 3246 | 1992 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry | ASTM International | |
Coast Guard | 46 CFR 114.600(b) | UL 1572 | 1995 | High Intensity Discharge Lighting Fixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 148.5(a) | IMSBC Code | 2009 | International Maritime Solid Bulk Cargoes Code and Supplement | International Maritime Organization | |
Coast Guard | 46 CFR 160.005-3(g) | Drawing No. 160.005-1 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Adult) | U.S. Coast Guard | |
Coast Guard | 46 CFR 169.115(c)(3) | NFPA 306 | 1980 | Control of Gas Hazards on Vessels | National Fire Protection Association | |
Coast Guard | 46 CFR 160.041-1(b)(1) | NIST R-178 | 1941 | Packaging of First-Aid Unit Dressings and Treatments | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 116.300(b)(1)(i) | ABS Publication | 1975 | Rules for Building and Classing Aluminum Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 160.055-3(c) | Federal Standard 191 | 1978 | Textile Test Method 5650 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 164.018-11(c)(2) | FedSpec L-S-300 | 1974 | Sheeting and Tape Reflective: Nonexposed Lens, Adhesive Backing | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 7 | ASTM B 858M | 1995 | Standard Test Method for Determination of Susceptibility to Stress Corrosion Cracking in Copper Alloys Using Ammonia Vapor Test | ASTM International | |
Coast Guard | 46 CFR 160.077-15(e) | Federal Standard 751 | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Coast Guard | 40 CFR 136.3(a) Table IB (4) | APHA Method 4500-NH3 D | 1997 | Ammonia by Selective Ion Probe | American Public Health Association | |
Coast Guard | 21 CFR 172.785(b)(2) | FDA Publication | 2001 | Method to Determine Lytic Activity/Phage Titer | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 78.45-1(a)(2) | IMO Resolution A.654(16) | 1989 | Graphical Symbols for Fire Control Plans | International Maritime Organization | |
Coast Guard | 46 CFR 160.132-5(c)(2) | IMO LSA Code | 2010 | International Life-Saving Appliances, including LSA Code | International Maritime Organization |