This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number Sort descending | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 92.5(c)(2) | SAE J-244 | 1983 | Recommended Practice for Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 89.416(a) | SAE J-244 | 1983 | Recommended Practice for Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 86.1808-01(f)(12)(iii) | SAE J-2534 | 2002 | Recommended Practice for Pass-Thru Vehicle Programming | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 86.1808-01(f)(12)(iv) | SAE J-2534 | 2002 | Recommended Practice for Pass-Thru Vehicle Programming | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 86.1808-01(f)(6)(ii)(G) | SAE J-2534 | 2002 | Recommended Practice for Pass-Thru Vehicle Programming | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 86.1(g)(25) | SAE J-2534 | 2002 | Recommended Practice for Pass-Thru Vehicle Programming | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 86.1808-01(f)(17)(iv) | SAE J-2534 | 2002 | Recommended Practice for Pass-Thru Vehicle Programming | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 86.1(b)(2)(xxxviii) | SAE J-2534-1 | 2004 | Recommended Practice for Pass-Thru Vehicle Programming | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1060.801 Low-permeability material | SAE J-2659 | 2003 | Test Method to Measure Fluid Permeation of Polymeric Materials by Speciation | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1060.810(b) Table 2 | SAE J-2659 | 2003 | Test Method to Measure Fluid Permeation of Polymeric Materials by Speciation | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.501(a)(3) | SAE J-2711 | 2002 | Recommended Practice for Measuring Fuel Economy and Emissions of Hybrid-Electric and Conventional Heavy-Duty Vehicles | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.1010(b)(6) | SAE J-2711 | 2002 | Recommended Practice for Measuring Fuel Economy and Emissions of Hybrid-Electric and Conventional Heavy-Duty Vehicles | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 86.1867-12(b)(2) | SAE J-2727 | 2012 | Mobile Air Conditioning System Refrigerant Emission Charts for R-134a and R-1234yf | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 86.1867-12(b)(1) | SAE J-2727 | 2012 | Mobile Air Conditioning System Refrigerant Emission Charts for R-134a and R-1234yf | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 86.1(g)(26) | SAE J-2727 | 2012 | Mobile Air Conditioning System Refrigerant Emission Charts for R-134a and R-1234yf | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 86.1867-12(a) | SAE J-2727 | 2012 | Mobile Air Conditioning System Refrigerant Emission Charts for R-134a and R-1234yf | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 86.1(g)(27) | SAE J-2765 | 2008 | Procedure for Measuring System COP [Coefficient of Performance] of a Mobile Air Conditioning System on a Test Bench | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 86.1868-12(h)(5) | SAE J-2765 | 2008 | Procedure for Measuring System COP [Coefficient of Performance] of a Mobile Air Conditioning System on a Test Bench | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.425(j)(1)(i) | SAE J-2951 | 2014 | Drive Quality Evaluation for Chassis Dynamometer Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.425(j)(1)(ii) | SAE J-2951 | 2014 | Drive Quality Evaluation for Chassis Dynamometer Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.425(j)(1)(iii) | SAE J-2951 | 2014 | Drive Quality Evaluation for Chassis Dynamometer Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.425(j)(1)(iv) | SAE J-2951 | 2014 | Drive Quality Evaluation for Chassis Dynamometer Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.1010(b)(7) | SAE J-2951 | 2014 | Drive Quality Evaluation for Chassis Dynamometer Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.425(j)(1) | SAE J-2951 | 2014 | Drive Quality Evaluation for Chassis Dynamometer Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1051.245(e)(2) Table 2(ii) | SAE J-30 | 1998 | Fuel and Oil Hoses | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1051.501(c)(2) | SAE J-30 | 1998 | Fuel and Oil Hoses | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1060.810(b) Table 2 | SAE J-30 | 1998 | Fuel and Oil Hoses | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1060.515(c) | SAE J-30 | 1998 | Fuel and Oil Hoses | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-319b | 1971 | Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(8) | SAE J-319b | 1971 | Self-Propelled Scrapers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(h) | SAE J-320a | 1969 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(i) | SAE J-320a | 1969 | Minimum Performance Criteria for Rollover Protective Structure for Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(9) | SAE J-320a | 1971 | Minimum Performance Criteria for Roll-Over Protective Structure for Rubber-Tired, Self-Propelled Scrapers | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-320a | 1972 | Minimum Performance Criteria for Rollover Protective Structure for Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(i) | SAE J-320b | 1972 | Minimum Performance Criteria for Rollover Protective Structures for Prime Movers | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-320b | 1970 | Minimum Performance Criteria for Rollover Protective Structures for Prime Movers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(5) | SAE J-321a | 1970 | Fenders for Pneumatic-Tired Earthmoving Haulage Equipment | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(10) | SAE J-321a | 1970 | Fenders for Pneumatic-Tired Earthmoving Haulage Equipment | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(2)(i) | SAE J-333a | 1970 | Operation Protection for Wheel-Type Agricultural and Industry Tractors | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1002(k) | SAE J-333a | 1970 | Operator Protection for Wheel-type Agricultural and Industrial Tractors | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1002(j)(1) | SAE J-333a | 1970 | Operation Protection for Wheel-Type Agricultural and Industry Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(vi) | SAE J-334a | 1970 | Protective Frame Test Procedures and Performance Requirements | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-334a | 2012 | Protective Frame Test Procedures and Performance Requirements | Society of Automotive Engineers | |
Coast Guard | 33 CFR 183.5(b) | SAE J-378 | 1984 | Marine Engine Wiring | Society of Automotive Engineers | |
Coast Guard | 33 CFR 183.430(a)(2)(i) | SAE J-378 | 1984 | Marine Engine Wiring | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14130(h) | SAE J-386 | 1997 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(11) | SAE J-386 | 1969 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 57.14131(d) | SAE J-386 | 1993 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 57.14130(j) | SAE J-386 | 1985 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14130(h) | SAE J-386 | 1985 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers |