This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 49 CFR 572.175(a) | Drawing No. 420-3000 | 2011 | Upper Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.10(f)(3) | DICOM Standard PS 3.10-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 10: Media Storage and File Format for Media Interchange | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 435.11(u) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(e) | ASTM D 4006 | 2011 | Standard Test Method for Water in Crude Oil by Distillation, including Annex A1 and Appendix X1 | ASTM International | |
Environmental Protection Agency | 40 CFR 435.41(ee) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Health and Human Services Department | 45 CFR 162.1203(a)(10) | CAQH Publication | 2011 | Phase II CORE 270: Connectivity Rule, version 2.2.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Federal Motor Carrier Safety Administration | 49 CFR 384.231(d) | CDLIS | 2011 | Commercial Driver's License Information System (CDLIS) State Procedures Manual, Release 5.2.0 | American Association of Motor Vehicle Administrators, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(viii) | Drawing No. 420-7000-1 | 2011 | Complete Arm Assembly—left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(1) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 40 CFR 1065.703 Table 1 | ASTM D 4052 | 2011 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1867-12(b)(1) | SAE J-2064 | 2011 | R134a Refrigerant Automotive Air-Conditioned Hose | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 435.13 Note 11 | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1065.1010(g)(2) | SAE J-1151 | 2011 | Methane Measurement Using Gas Chromatography | Society of Automotive Engineers | |
Environmental Protection Agency | 86 FR 34308 | 40 CFR 1066 | Greenhouse Gas Emissions Model (GEM) version 2.0.1 | 2011 | Improvements for Heavy-Duty Engine and Vehicle Test Procedures, and Other Technical Amendments | U.S. Environmental Protection Agency |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(6) | ANSI Z535.1 | 2011 | Specification of the Safety Colors for CIE Illuminate C and the CIE 1931, 2 Standard Observer | American National Standards Institute | |
Energy Department | 87 FR 53618 | 10 CFR 430 | ANSI C78.21–2011 (R2016) | 2011 | Energy Conservation Program: Test Procedures for General Service Fluorescent Lamps, Incandescent Reflector Lamps, and General Service Incandescent Lamps | American National Standards Institute |
Coast Guard | 45 CFR 162.1603(b) | CAQH Publication | 2011 | ACME Health Plan, CORE v5010 Master Companion Guide Template, 005010, 1.2 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
National Highway Traffic Safety Administration | 49 CFR 572.172(a) | Drawing No. 420-1000 | 2011 | Head Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 479 | 2011 | Standard Specification for In-Service Care of Insulating Blankets | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(6) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(30) | ANSI Z535.5 | 2011 | Safety Tags and Barricade Tapes (for Temporary Hazards) | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Environmental Protection Agency | 40 CFR 86.113-94(b)(3) | ASTM D 976 | 2011 | Standard Test Method for Calculated Cetane Index of Distillate Fuels | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Environmental Protection Agency | 40 CFR 435 Appendix 7, Subpart A | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.110(i)(3)(ii) | NFPA 58 | 2011 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.97 Table E-2 Note | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Energy Department | 87 FR 50396 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Ceiling Fans | International Electrotechnical Commission |
Transportation Department | 88 FR 84514 | 49 CFR 571 | ASTM D3574–11 | 2011 | Federal Motor Vehicle Safety Standards: Child Restraint Systems | ASTM International |
Environmental Protection Agency | 40 CFR 86.1(g)(1) | SAE J-1151 | 2011 | Methane Measurement Using Gas Chromatography | Society of Automotive Engineers | |
Environmental Protection Agency | 85 FR 78412 | 40 CFR 80 | ASTM D4052–11 | 2011 | Fuels Regulatory Streamlining | ASTM International |
National Highway Traffic Safety Administration | 49 CFR 572.175(a) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.10(f)(4) | DICOM Standard PS 3.11-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 11: Media Storage Application Profiles | National Electrical Manufacturers Association | |
Federal Communications Commission | 88 FR 30654 | 47 CFR 74 | ATSC A/53 Part 2 | 2011 | Establishing Rules for Digital Low Power Television and Television Translator Stations | Advanced Television Systems Committee |
Energy Department | 87 FR 33316 | 10 CFR 431 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedures for Residential and Commercial Clothes Washers | International Electrotechnical Commission |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(ix) | Drawing No. 420-7000-2 | 2011 | Complete Arm Assembly, right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.14(g)(32) | ASTM D 2908 | 2011 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 435.13 Note 9 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 11 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(23) | ASTM D 2784 | 2011 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) | ASTM International | |
Mine Safety and Health Administration | 30 CFR 57 Subpart C Appendix I | NFPA 16 | 2011 | Foam Water Spray Extinguishing Systems | National Fire Protection Association | |
Energy Department | 87 FR 33316 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedures for Residential and Commercial Clothes Washers | International Electrotechnical Commission |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (viii) | Drawing No. 420-7000-2 | 2011 | Complete Arm Assembly, right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 435.15 Note 8 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 3262 | 2011 | Standard Specification for, Fiberglass, (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe | ASTM International | |
Energy Department | 86 FR 56608 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Clothes Dryers | International Electrotechnical Commission |
Mine Safety and Health Administration | 30 CFR 57 Subpart C Appendix I | NFPA 12 | 2011 | Carbon Dioxide Fire Extinguishing Systems | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.173(b)(2)(i) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Health and Human Services Department | 45 CFR 170.202(b) | ONC XDR/XDM for Direct Messaging v1.0 | 2011 | ONC XDR and XDM for Direct Messaging Specification | Office of the National Coordinator for Health Information Technology | |
Environmental Protection Agency | 40 CFR 86.1(g)(2) | SAE J-1349 | 2011 | Engine Power Test Code—Spark Ignition and Compression Ignition—As Installed Net Power Rating | Society of Automotive Engineers |