This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.151-21(r) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (5) | Colilert-18® Method | 2010 | Coliform/E. coli detection kit | IDEXX Laboratories | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1031 | SAE J1594_201007 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Coast Guard | 46 CFR 160.151-15(m) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 80.580(c)(1)(i) | ASTM D 4294 | 2010 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(206) | ASTM E 2780 | 2010 | Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(e) Table II Footnote 23 | EPA Method 1680 | 2010 | Fecal Coliforms in Sewage Sludge (Biosolids) by Multiple-Tube Fermentation using Lauryl Tryptose Broth (LTB) and EC Medium | U.S. Environmental Protection Agency | |
Federal Communications Commission | 88 FR 67108 | 47 CFR 2 | ETSI EN 300 422–1 V1.4.2 (2011– 08) | 2011 | Updating References to Standards Related to the Commission's Equipment Authorization Program | European Telecommunications Standards Institute |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM D 4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.97(a)(3)(ii) | ANSI Z535.1 | 2011 | Safety colors | American National Standards Institute | |
Coast Guard | 40 CFR 63.14(g)(76) | ASTM D 6357 | 2011 | Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma MS, Graphite Furnace Atomic Absorption Spectrometry | ASTM International | |
Energy Department | 85 FR 56475 | 10 CFR 429 and 430 | IEC 62301 2011 | 2011 | Energy Conservation Program: Test Procedure for Fluorescent Lamp Ballasts | International Electrotechnical Commission |
National Highway Traffic Safety Administration | 49 CFR 572.176(a) | Drawing No. 420-5000 | 2011 | Complete leg assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.10(f)(6) | DICOM Standard PS 3.14-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 14: Grayscale Standard Display Function | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(7) | ASTM D 975 | 2011 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(a) | ASTM D 7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 435.11(ee) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Energy Department | 88 FR 31102 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Portable Air Conditioners | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 435.41(mm) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 1065.703 Table 1 | ASTM D 4052 | 2011 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(66) | ANSI Z535.1 | 2011 | Safety Colors | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(3) | NHTSA Publication | 2011 | Procedures for Assembly, Disassembly and Inspection (PADI) of the Hybrid III 10-Year-Old Child Test Dummy (HIII-10C) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(2) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Nuclear Regulatory Commission | 87 FR 65128 | 10 CFR 50 | ASME NQA–1b–2011 | 2011 | American Society of Mechanical Engineers 2019-2020 Code Editions | American Society of Mechanical Engineers |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(d) | ASTM D 5864 | 2011 | Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components | ASTM International | |
Environmental Protection Agency | 40 CFR 435.13 Note 10 | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.15 Note 11 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1728.202(b)(3) | RUS Bulletin 1728F-700 | 2011 | RUS Specification for Wood Poles, Stubs and Anchor Logs | Rural Utilities Service, U.S. Department of Agriculture | |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | MIL–DTL–24640C with Supplement 1 | 2011 | Update to Electrical Engineering Regulations | U.S. Department of Defense |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(v) | SAE J-167 | 2011 | Protective Frame with Overhead Protection | Society of Automotive Engineers | |
Coast Guard | 45 CFR 162.1203(a)(5) | CAQH Publication | 2011 | Phase I CORE 156: Eligibility and Benefits Real Time Response Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Health and Human Services Department | 45 CFR 162.1602(d)(1)(i) | NACHA Publication | 2011 | NACHA Operating Rules & Guidelines, A Complete Guide to the Rules Governing the ACH Network | National Automated Clearing House Association | |
National Highway Traffic Safety Administration | 49 CFR 572.173(b)(2)(iii) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.7575 Biodiesel | ASTM D 6751 | 2011 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 435.11(d) | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Coast Guard | 45 CFR 162.1203(a)(4) | CAQH Publication | 2011 | Phase I CORE 155: Eligibility and Benefits Batch Response Time Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(f) | ASTM D 3683 | 2011 | Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1211.40 (b)(1) | ANSI/DASMA 102 | 2011 | Specifications for Sectional Doors | American National Standards Institute | |
Coast Guard | 45 CFR 162.1603(b) | CAQH Publication | 2011 | ACME Health Plan, CORE v5010 Master Companion Guide Template, 005010, 1.2 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 479 | 2011 | Standard Specification for In-Service Care of Insulating Blankets | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.176(b) | Drawing No. 420-5200 | 2011 | Lower upper leg assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.10(f)(7) | DICOM Standard PS 3.16-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 16: Content Mapping Resource | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(e) | ASTM D 4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Energy Department | 85 FR 56475 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Fluorescent Lamp Ballasts | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 86.1(g)(22) | SAE J-2064 | 2011 | R134a Refrigerant Automotive Air-Conditioned Hose | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(2) | Drawing No. 420-2070 | 2011 | Lower neck bracket assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.44(a) | DICOM Standard PS 3.12-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 12: Media Formats and Physical Media for Media Interchange | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 435.13 Note 10 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Energy Department | 87 FR 18261 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Microwave Ovens | International Electrotechnical Commission |
Energy Department | 87 FR 63588 | 10 CFR 429 | IEEE 114–2010 | 2011 | Energy Conservation Program: Test Procedure for Electric Motors | Institute of Electrical and Electronics Engineers |