Coast Guard |
|
46 CFR 114.600(b) |
ASTM B127 |
1998 |
Standard Specification for Nickel-Copper Alloy Plate, Sheet, and Strip
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 98.7(p)(1) |
AAPG Publication |
1991 |
Geologic Note: AAPG-CSD Geologic Provinces Code Map: AAPG Bulletin, Prepared by Richard F. Meyer, Laure G. Wallace, and Fred J. Wagner, Jr., Volume 75, Number 10, pages 1644-1651
|
American Association of Petroleum Geologists |
Animal and Plant Health Inspection Service |
|
7 CFR 353.9(b)(3) |
USDA Reference Manual A |
2001 |
Reference Manual for Administration, Procedures, and Policies of the National Seed Health System
|
U.S. Department of Agriculture |
Coast Guard |
|
46 CFR 110.10-1(g)(25) |
IEC 92-401 |
1980 |
Electrical Installations in Ships, Part 401: Installation and Test of completed Installation with amendment 1 (1987) and amendment 2 (1997), Third Edition
|
International Electrotechnical Commission |
National Highway Traffic Safety Administration |
|
49 CFR 572.44(d)(5) |
RT Publication |
1990 |
FIR100 Filter Program, Version 1.0
|
Reprographic Technologies |
Coast Guard |
|
46 CFR 160.062-1(a)(2) |
Federal Standard 151 |
1967 |
Metals, Test Methods
|
Federal Specifications Standards and Test Methods |
Environmental Protection Agency |
|
40 CFR 1065.1010(e)(2) |
ISO 3016 |
1994 |
Petroleum products--Determination of pour point
|
International Organization for Standardization |
Rural Utilities Service |
|
7 CFR 1755.902(c)(4)(i) |
ASTM D4565 |
1999 |
Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (43) |
EPA Method 601 |
1982 |
Purgeable Halocarbons
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.25(a) Table |
APHA Method 7500-Ra B |
1998 |
Radium 226 - Precipitation
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 60.4415(a)(1)(i) |
ASTM D5453 |
2005 |
Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
|
ASTM International |
Labor Department |
|
41 CFR 50-204.65 |
49 CFR 179 |
2012 |
Specifications for Tank Cars
|
U.S. Department of Transportation |
Coast Guard |
|
46 CFR 56.60-1(b) Table 56.60-1(b) |
ASTM F1123 |
1993 |
Standard Specification for Non-Metallic Expansion Joints
|
ASTM International |
Rural Utilities Service |
|
7 CFR 1755.390, Appendix A III(5)(c) |
ASTM D4565 |
1990 |
Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable
|
ASTM International |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 192.925(b)(2) |
NACE RP-0502 |
2002 |
NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology
|
National Association of Corrosion Engineers |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(10) |
API MPMS |
2005 |
Chapter 4, Section 1
|
American Petroleum Institute |
National Highway Traffic Safety Administration |
|
49 CFR 572.131 Table A |
Drawing No. 880105-560-1 |
2002 |
Complete Leg Assembly, Left
|
Reprographic Technologies |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (40) |
ASTM D3867A |
2004 |
Standard Test Methods for Nitrite-Nitrate in Water
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (13) Fluoride |
APHA Method 4110 B |
1992 |
Anions by Ion Chromatography with Chemical Suppression of Eluent
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) |
EPA Method 6020 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
Food and Drug Administration |
|
21 CFR 177.1030(c)(2) |
FDA Publication |
1987 |
Determination of Residual Acrylonitrile and Styrene Monomers Gas Chromatographic Internal Standard Method
|
Food and Drug Administration, U.S. Department of Health and Human Services |
Environmental Protection Agency |
|
40 CFR 178.345-1(f) |
EPA-821-B-98-016 |
1998 |
Analytical Methods for the Determination of Pollutants in Pharmaceutical Manufacturing Industry Wastewaters, EPA Method 1671
|
U.S. Environmental Protection Agency |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(i)(7) |
AWS D10.9 |
1969 |
Standard Qualification of Welding Procedures and Welders for Piping and Tubing
|
American Welding Society |
Coast Guard |
|
46 CFR 56.25-20(b) |
ASME B18.2.2 |
1987 |
Square and Hex Nuts (Inch Series)
|
American Society of Mechanical Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1910.110(e)(3)(i), Table H-32 |
ASME B&PV Code |
1962 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
Housing and Urban Development Department |
|
24 CFR 200.948(a)(1)(i) |
ASTM D1667 |
1990 |
Standard Specification for Flexible Cellular Materials--Vinyl Chloride Polymers and Copolymers (Closed-cell Foam)
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart L Appendix B Metric Conversion |
ANSI/ASTM E380 |
1993 |
Standard for Metric Practice
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 1037.810(d)(3) |
SAE J-2071 |
1994 |
Aerodynamic Testing of Road Vehicles—Open Throat Wind Tunnel Adjustment
|
Society of Automotive Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(b)(10)(xv) |
APHA Method 2550 |
2000 |
Temperature
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (3) |
EPA Method 200.8 |
1994 |
Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry
|
U.S. Environmental Protection Agency |
Energy Department |
|
10 CFR 440 Appendix A |
ASTM C764 |
1988 |
Insulation, Loose-Fill Mineral Fiber
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 94.7(c)(1) |
ASM CS-104 UNS No. G10460 |
1985 |
Alloy Digest (Carbon Steel of Medium Carbon Content)
|
ASM International |
Coast Guard |
|
46 CFR 160.151-21(r) |
IMO LSA Code |
2010 |
Life-Saving Appliances, including LSA Code
|
International Maritime Organization |
Coast Guard |
|
46 CFR 197.204, ANSI Code1 |
ANSI B31.1 |
2013 |
Code for Pressure Piping
|
American National Standards Institute |
Mine Safety and Health Administration |
|
30 CFR 77.403-1(d)(1)(i) |
SAE J-320a |
1969 |
Minimum Performance Criteria for Rollover Protective Structure for Rubber-Tired Self-Propelled Scrapers
|
Society of Automotive Engineers |
Coast Guard |
|
46 CFR 169.115(c)(2) |
NIST Publication 440 |
1976 |
Color: Universal Language and Dictionary of Names
|
National Institute of Standards and Technology, U.S. Department of Commerce |
Research and Special Programs Administration |
|
21 CFR 177.1570(b)(1)(ii) |
ASTM D1601 |
1978 |
Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers
|
ASTM International |
Coast Guard |
|
46 CFR 109.105(b) |
IMO Resolution A.654(16) |
1989 |
Graphical Symbols for Fire Control Plans
|
International Maritime Organization |
Environmental Protection Agency |
|
40 CFR 261, Appendix IX, Tables 1 and 2 |
EPA Method 0051 |
1996 |
Midget Impinger HCl/Cl2 Emission Sampling Train
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (69) |
USGS O-3105-83 |
1983 |
Chlorophenoxy acids, total recoverable, gas chromatographic
|
U.S. Geological Survey |
Environmental Protection Agency |
|
40 CFR 147.800 |
IAUIC regulations |
2014 |
State of Iowa-administered program (Reserved)
|
State of Iowa |
Environmental Protection Agency |
|
40 CFR 63.11237 Biodiesel |
ASTM D6751 |
2011 |
Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IH (5) |
APHA Method 9221 F |
2006 |
Multiple Tube Fermentation Qualitative (LTB/EC MUG): Total Coliform and E. Coli
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 435.13 Note 8 |
EPA Method 1644 |
2015 |
Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds
|
U.S. Environmental Protection Agency |
Occupational Safety and Health Administration |
|
29 CFR 1926.453(b)(5)(iii) |
AWS D10.9 |
1969 |
Standard Qualification for Welding Procedures and Welders for Piping and Tubing
|
American Welding Society |
Coast Guard |
|
46 CFR 125.180(b) |
ABYC A-7 |
1970 |
Recommended Practices and Standards Covering Boat Heating Systems
|
American Boat and Yacht Council |
National Highway Traffic Safety Administration |
|
49 CFR 572.127(g) |
Drawing No. 127-0000 |
1987 |
Technical drawings and specifications package
|
Reprographic Technologies |
Public Health Service |
|
42 CFR 52b.12(c)(7)(iv) |
NFPA 101 |
1997 |
Life Safety Code
|
National Fire Protection Association |
Environmental Protection Agency |
|
40 CFR 79.61(d)(2)(i) |
HHS Publication |
1985 |
Guide for the Care and Use of Laboratory Animals
|
U.S. Department of Health and Human Services |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB Footnote 69 |
EPA Method 1627 |
2011 |
Kinetic Test Method for the Prediction of Mine Drainage Quality, EPA-821-R-09-002
|
U.S. Environmental Protection Agency |