Environmental Protection Agency |
|
40 CFR 272, Subpart BBB |
PRHWMP |
2014 |
Commonwealth of Puerto Rico Hazardous Waste Management Program (Reserved)
|
Commonwealth of Puerto Rico |
Coast Guard |
|
46 CFR 121.240(a) |
ABYC A-1 |
1993 |
Marine Liquefied Petroleum Gas Systems
|
American Boat and Yacht Council |
Minerals Management Service |
|
30 CFR 250.490(g)(4)(iv) |
ANSI Z88.2 |
1992 |
Respiratory Protection
|
American National Standards Institute |
Coast Guard |
|
46 CFR 111.60-1(a) |
MIL-C-24643A |
1994 |
Military Specification Cables and Cords, Electric, Low Smoke, for Shipboard Use, General Specification for (1996) Amendment 2
|
U.S. Department of Defense |
Federal Railroad Administration |
|
49 CFR 238 Appendix B (a)(3)(ii) |
California State Technical Bulletin 133 |
1991 |
Flammability Test Procedure for Seating Furniture for Use in Public Occupancies
|
State of California, Department of Consumer Affairs |
Food and Drug Administration |
|
21 CFR 114.90(c) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
Food and Drug Administration |
|
21 CFR 131.127(d) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
Food and Drug Administration |
|
21 CFR 131.120(c) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
Rural Utilities Service |
|
7 CFR 1755.860(a)(6) |
ASTM D4101 |
1988 |
Standard Specification for Propylene Plastic Injection and Extrusion Materials
|
ASTM International |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 173.58(a) |
UN Publication |
2003 |
UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria
|
United Nations |
Food and Drug Administration |
|
21 CFR 184.1878(b) |
Food Chemicals Codex |
1981 |
Thiamine Mononitrate
|
National Academy Press |
Coast Guard |
|
46 CFR 130.240(a) |
ABS Publication |
1995 |
Rules for Building and Classing Steel Vessels
|
American Bureau of Shipping |
National Highway Traffic Safety Administration |
|
49 CFR 572.136(b)(1) |
Drawing No. SA-572-S14 |
1987 |
Femur load transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Fenarimol) |
EPA Method 633.1 |
1993 |
Neutral Nitrogen Containing Pesticides by Liquid/Liquid Extraction and GC/NPD
|
U.S. Environmental Protection Agency |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(72) |
ANSI Z88.2 |
1969 |
Practices for Respiratory Protection
|
American National Standards Institute |
Nuclear Regulatory Commission |
|
10 CFR 50.55a(b)(2)(vii) |
ASME OM Code |
1989 |
Code for Operation and Maintenance of Nuclear Power Plants or 1989 Edition, Revision Date or Indicator for ASME/ANSI OM Part 4, ASME/ANSI Parts 6, and 10 must be the OMa-1988 Addenda to the OM-1987 Edition
|
American Society of Mechanical Engineers |
Federal Railroad Administration |
|
49 CFR 224.103(b) |
ASTM D4956 |
2004 |
Standard Specification for Retroreflective Sheeting for Traffic Control
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (13) |
EPA Method 531.1 |
1995 |
Measurement of N-Methylcarbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post Column Derivatization -Revision 3.1.
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.852(c)(1)(i)(F) |
APHA Method 9221 |
1998 |
Multiple Tube Fermentation Technique for Members of the Coliform Group, F.1, Escherichia coli Procedure: EC-MUG medium
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(d) |
ASTM E711 |
1987 |
Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
|
ASTM International |
Coast Guard |
|
46 CFR 160.047-1(a)(1) |
FedSpec L-P-375C |
1970 |
Plastic Film, Flexible, Vinyl Chloride
|
Federal Specifications Standards and Test Methods |
Research and Special Programs Administration |
|
49 CFR 176.30(a)(3) |
IMDG Code |
2006 |
International Maritime Dangerous Goods Code
|
International Maritime Organization |
Environmental Protection Agency |
|
40 CFR 141.24(e)(1) Table (Atrazine) |
EPA Method 507 |
1995 |
Nitrogen & Phosphorous Pesticides (Drinking Water)
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 60.593(d) |
ASTM D86 |
1990 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
Coast Guard |
|
46 CFR 164.008-1(b) |
ASTM E119 |
1998 |
Standard Test Methods for Fire Tests of Building Construction and Materials
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 282.94(d)(1)(i)(A) |
UTUSTP |
1995 |
Utah Statutory Requirements Applicable to the Underground Storage Tank Program
|
State of Utah |
Coast Guard |
|
46 CFR 27.102(b) |
SAE J-1475 |
1984 |
Hydraulic Hose Fittings for Marine Applications
|
Society of Automotive Engineers |
Environmental Protection Agency |
|
40 CFR 86.1817-05(c) |
ASTM E29 |
1993 |
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 90.7(b)(1) Table |
ASTM D5191 |
1993 |
Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
|
ASTM International |
Coast Guard |
|
46 CFR 169.703(c)(5)(ii) |
ABYC A-22 |
1978 |
Marine Compressed Natural Gas Systems
|
American Boat and Yacht Council |
Coast Guard |
|
46 CFR 199.05(b) |
IMO Resolution MSC.4(48) |
1994 |
International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk (IBC Code)
|
International Maritime Organization |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (9) |
APHA Method 6410 B |
2000 |
Base/Neutral and Acid Extractable Compounds by GC/MS
|
American Public Health Association |
Federal Highway Administration |
|
23 CFR 625.4(d)(1)(vii)(A) |
AASHTO BWC-7-I1-OL |
2018 |
AASHTO BWC-7-I1-OL, 2018 Interim Revisions to AASHTO/AWS D1.5M/D1.5: 2015 Bridge Welding Code
|
American Association of State Highway and Transportation Officials |
Environmental Protection Agency |
|
40 CFR 63.3161(g) |
ASTM D5066 |
1991 |
Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints--Weight Basis
|
ASTM International |
Energy Department |
|
10 CFR 430 Subpart B, App. D, 1.7 |
AHAM HLD-1 |
1974 |
AHAM Performance Evaluation Procedure for Household Tumble Type Clothes Dryers
|
Association of Home Appliance Manufacturers |
Coast Guard |
|
46 CFR 162.028-3(e) |
MIL-STD-167 |
1963 |
Mechanical Vibrations of Shipboard Equipment
|
U.S. Department of Defense |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (22) |
ASTM D4190 |
2008 |
Metals by Direct Current Plasma
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 141.21(f)(3) |
IDEXX Colisure Test |
1994 |
Detect coliforms/E. coli with the convenience of a long-read window
|
IDEXX Laboratories |
Environmental Protection Agency |
|
40 CFR 799.9346(h)(5) |
OECD Guidelines for Testing of Chemicals |
1981 |
Section 4-Health Effects, Part 413, Subchronic Inhalation Toxicity Studies
|
Organization for Economic Cooperation and Development |
Environmental Protection Agency |
|
40 CFR 80.47(m)(4) |
ASTM D6708 |
2013 |
Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(27) |
ASTM F2412 |
2005 |
Standard Test Methods for Foot Protection
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 24, Section 6.1 |
ASTM D1475 |
1960 |
Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products
|
ASTM International |
National Highway Traffic Safety Administration |
|
49 CFR 572.130(a)(1)(vii) |
Drawing No. 880105-728-1 |
2000 |
Complete Arm Assembly, Left
|
Reprographic Technologies |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Toxaphene) |
EPA Method 617 |
1993 |
Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 430, Appendix A, Method 1650 (16.2) |
EPA Method 9020 |
1987 |
Test Methods for Evaluating Solid Waste
|
U.S. Environmental Protection Agency |
Coast Guard |
|
33 CFR 142.33(a) |
ANSI Z41 |
1983 |
Protective Footwear
|
American National Standards Institute |
Mine Safety and Health Administration |
|
30 CFR 75.333(d)(1) |
ASTM E162 |
1987 |
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
NAPHCC National Standard Plumbing Code |
1993 |
National Standard Plumbing Code
|
National Association of Plumbing Heating Cooling Contractors |
National Highway Traffic Safety Administration |
|
49 CFR 571.205(a) S5.1.2.1 |
ANSI Z26.1 |
1977 |
Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (1) |
APHA Method 6410 B |
1995 |
Base/Neutral and Acid Extractable Compounds by GC/MS
|
American Public Health Association |