Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(65) |
ANSI Z53.1 |
1967 |
Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (11) |
HCC Method 8009 |
1979 |
Zincon Method for Zinc, Hatch Handbook of Water Analysis
|
Hach Chemical Company |
Research and Special Programs Administration |
|
49 CFR 192.283(a)(1)(i) |
ASTM D2513 |
1999 |
Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing and Fittings
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 75, Appendix G, Section 2.1.2 |
ASTM D5291 |
2002 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 1065.1010(e)(1) |
ISO 2719 |
2002 |
Determination of flash point--Pensky-Martens closed cup method
|
International Organization for Standardization |
Coast Guard |
|
46 CFR 160.151-5(d)(4) |
IMO Revised recommendation on testing |
2010 |
Life-Saving Appliances, including LSA Code, Revised recommendation on testing of life-saving appliances
|
International Maritime Organization |
Coast Guard |
|
46 CFR 57.02-2(b) |
ASME B&PV Code |
1989 |
Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB Footnote 67 |
Orion Method AQ4500 |
2009 |
Determination of Turbidity by Nephelometry. Revision 5
|
Thermo Scientific |
Coast Guard |
|
33 CFR 183.440(a) |
SAE J-557 |
1968 |
High Tension Ignition Cable
|
Society of Automotive Engineers |
Coast Guard |
|
46 CFR 160.156-11(c)(1)(2)(B) |
ISO 1172:1996(E) |
1996 |
Textile-glass-reinforced plastics—Prepregs, moulding compounds and laminates—Determination of the textile-glass and mineral-filler content—Calcination methods, Second Edition
|
International Organization for Standardization |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (13) |
ASTM D5673 |
2005 |
Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(b)(15)(lvii) |
ASTM D5392 |
1993 |
Standard Test Method for Isolation and Enumeration of Escherichia coli in Water by the Two-Step Membrane Filter Procedure
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 799.5089(h)(2) |
ASTM E1148 |
2002 |
Standard Test Method for Measurements of Aqueous Solubility
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 63.5935 Corrosion-resistant resin (2) |
ASTM F1216 |
2009 |
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.218(d)(4) |
ANSI B31.1.0 Addenda |
2014 |
Addenda to Code for Pressure Piping
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 282.61(d)(1)(i)(B) |
HIUSTP |
2001 |
Hawaii Regulatory Requirements Applicable to the Underground Storage Tank Program
|
State of Hawaii |
Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 104, 7.1 |
ASTM D1193 |
1991 |
Standard Specification for Reagent Water
|
ASTM International |
Food and Drug Administration |
|
21 CFR 176.170(a)(5) |
ASTM D611 |
1982 |
Standard Test Method for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1926.200(g)(2) |
DOT Publication |
2000 |
Manual on Uniform Traffic Control Devices. Millennium Edition
|
U.S. Department of Transportation |
Occupational Safety and Health Administration |
|
29 CFR 1910.269 Appendix G |
ASTM F855 |
2009 |
Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment
|
ASTM International |
Research and Special Programs Administration |
|
46 CFR 111.60-13(a) |
IEEE 45 |
2002 |
Recommended Practice for Electrical Installations on Shipboard
|
Institute of Electrical and Electronics Engineers |
Coast Guard |
|
21 CFR 172.800(b)(1) |
FDA Publication |
1989 |
Acesulfame Potassium Assay
|
Food and Drug Administration, U.S. Department of Health and Human Services |
Federal Communications Commission |
|
47 CFR 76.602(b)(1) |
SCTE 26 (formerly DVS 194) |
2001 |
Home Digital Network Interface Specification with Copy Protection
|
Society of Cable Telecommunications Engineers |
Energy Department |
|
10 CFR 440 Appendix A |
ASTM C971 |
1982 |
Duct-work Insulation
|
ASTM International |
Coast Guard |
|
46 CFR 111.60-3(b)(3) |
MIL-C-24640A |
1995 |
Military Specification Cables, Light Weight, Electric, Low Smoke, for Shipboard Use, General Specification for (1995) Supplement 1
|
U.S. Department of Defense |
Environmental Protection Agency |
|
40 CFR 147.350(a)(1) |
CTUIC regulations |
1990 |
Connecticut General Statutes Annotated, title 22a (Environmental Protection), chapter 439, sections 22a-1 through 22a-27
|
State of Connecticut |
Rural Utilities Service |
|
7 CFR 1755.860(m)(9)(i) |
ASTM D4566 |
1990 |
Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60.111a(b) Petroleum liquids |
ASTM D975 |
1998 |
Standard Specification for Diesel Fuel Oils
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(13) |
CGA Publication |
1958 |
Regulator Connection Standard
|
Compressed Gas Association |
Coast Guard |
|
46 CFR 154.420(a) |
ABS Publication |
1981 |
Rules for Building and Classing Steel Vessels
|
American Bureau of Shipping |
National Highway Traffic Safety Administration |
|
49 CFR 572.146(k) |
Part No. 210-0000 |
2001 |
Parts List and Drawings, Subpart P Hybrid III 3-year-old child crash test dummy, (H-III3C, Alpha version)
|
Reprographic Technologies |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Pentachlorophenol) |
EPA Method 515.2 |
1995 |
Chlorinated acids Liquid/Solid and GC/ECD
|
U.S. Environmental Protection Agency |
Energy Department |
|
10 CFR 434.701.1 RS-29 |
ARI 365 |
1994 |
Commercial and Industrial Unitary Air-Conditioning Condensing Units (RS-29)
|
Air Conditioning and Refrigeration Institute |
Nuclear Regulatory Commission |
|
10 CFR 50.55a(g)(6)(ii)(D)(3) |
ASME Code Case N-729-1 |
2006 |
Alternative Examination Requirements for PWR Reactor Vessel Upper Heads with Nozzles Having Pressure-Retaining Partial-Penetration Welds, Section XI, Division 1
|
American Society of Mechanical Engineers |
Federal Railroad Administration |
|
49 CFR 232.603(a) |
AAR S-4230 |
2004 |
Intratrain Communication (ITC) Specification for Cable-Based Freight Train Control System, Version 3.0
|
Association of American Railroads |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (23) |
EPA Method 614 |
1993 |
Organophosphorous Pesticides by Liquid/Liquid Extraction and GC/ECD
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 143.4(b) Table (Chloride) |
APHA Method 4500-Cl B |
1992 |
Chlorine by Iodometric Direct Method
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 141.24(e)(1) Table (Picloram) |
EPA Method 515.2 |
1995 |
Chlorinated acids Liquid/Solid and GC/ECD
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 98.94(f)(4)(i) |
EPA-430-R-10-003 |
2010 |
Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1
|
U.S. Environmental Protection Agency |
Engineers Corps |
|
33 CFR 222.3(e) |
ANSI C2 |
2012 |
National Electrical Safety Code
|
American National Standards Institute |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/NSPI 1 |
1991 |
Standard for Public Swimming Pools
|
National Spa and Pool Institute |
Coast Guard |
|
33 CFR 155.1050(l)(2)(iii) |
ASTM F1779 |
2008 |
Standard Practice for Reporting Visual Observations of Oil on Water
|
ASTM International |
Energy Department |
|
10 CFR 431.19(c)(3) |
ISO/IEC Guide 25 |
1990 |
General requirements for the competence of calibration and testing laboratories
|
International Organization for Standardization / International Electrotechnical Commission |
Environmental Protection Agency |
|
40 CFR 63, Subpart JJJJJJ, Table 5, (1)(e) |
ASTM E871 |
2006 |
Standard Method of Moisture Analysis of Particulate Wood Fuels
|
ASTM International |
Minerals Management Service |
|
30 CFR 250.1202(a)(3)(iii) |
API MPMS |
2013 |
Chapter 5, Section 8
|
American Petroleum Institute |
Coast Guard |
|
46 CFR 111.30-5(a)(1) |
IEC 60092-302 |
1997 |
Electrical Installation in Ships, Part 302: Low-Voltage Switchgear and Control Gear Assemblies, Fourth Edition
|
International Electrotechnical Commission |
Research and Special Programs Administration |
|
49 CFR 195.3(c) E4 |
ASTM A381 |
2001 |
Standard Specification for Metal-Arc-Welded Steel Pipe for Use with High-Pressure Transmission Systems
|
ASTM International |
Coast Guard |
|
46 CFR 77.01-3(b) |
ASTM F1014 |
1992 |
Standard Specification for Flashlights on Vessels
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(36) |
ANSI H23.1 |
1970 |
Seamless Copper Water Tube Specification
|
American National Standards Institute |
Federal Motor Carrier Safety Administration |
|
49 CFR 393.13(b) |
FMVSS 108 |
1998 |
Lamps, Reflective Devices, and Associated Equipment
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |