This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 3.3.6.2 | ASTM D 5865 | 2010 | Standard Test Method for Gross Calorific Value of Coal and Coke | ASTM International | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 30.1(a) | BATF Publication 5110.6 | 1978 | Gauging Manual Embracing Instructions and Tables for Determining Quantity of Distilled Spirits by Proof and Weight | Bureau of Alcohol, Tobacco, Firearms and Explosives, U.S. Department of the Treasury | |
Occupational Safety and Health Administration | 29 CFR 1910.141(a)(2) Potable water | 40 CFR 141 | 2013 | National Primary Drinking Water Regulations | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | AAR Publication | 1988 | AAR Manual of Standards and Recommended Practices, Section I, Specially Equipped Freight Car and Intermodal Equipment | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 2, 1(b) | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Housing and Urban Development Department | 24 CFR 3282.12(b)(3)(i)(B)(4) | SBCCI Standard Plumbing Code | 2014 | Standard Plumbing Code | Southern Building Code Congress International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.19.1M | 1987 | Enameled Cast Iron Plumbing Fixtures | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 98.314(c) | ASTM D 3176 | 2002 | Standard Practice for Ultimate Analysis of Coal and Coke | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(x)(1)(i) | 35 I.A.C. 215, Subpart X | 1989 | Administrative Code, | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.703(g)(8) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Food and Drug Administration | 21 CFR 131.110(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 63.865(b)(5)(iii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 431.95(b)(4) | ARI 310/380 | 2004 | Packaged Terminal Air-Conditioners and Heat Pumps | Air Conditioning and Refrigeration Institute | |
Environmental Protection Agency | 40 CFR 52, Subpart J | DCSIP | 1979 | District Implementation Plan with Regulatory and Nonregulatory Revisions | District of Columbia | |
Coast Guard | 46 CFR 199.05(b) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-reflective Materials on Life-saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 56.01-2(k)(1) | MSS SP-6 | 2001 | Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (33) | EPA Method 608 | 1982 | Organochlorine Pesticides & PCBs by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Maganese) | APHA Method 3113 B | 1992 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Coast Guard | 46 CFR 57.06-1(c) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.17(q)(1) | WPCF Method 209A | 1980 | Total Residue Dried at 103–105 °C, in Standard Methods for the Examination of Water and Wastewater, 15th Edition | Water Pollution Control Federation | |
Energy Department | 10 CFR 430.3(e)(8) | ASHRAE 51 | 1999 | Laboratory Methods for Testing Fans for Aerodynamic Performance Rating | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 162.018-7(a) | CGA S-1.2.5.2 | 2013 | Flow test data for safety and relief valves for use on pressure vessels | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (13) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/mass Spectrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (32) | APHA Method 6440 B | 2000 | Polynuclear Aromatic Hydrocarbons by Micro Liquid-Liquid Extraction Chromatographic Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Simazine) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.107a(d)(5)(iii) | ASME MFC-4M | 2008 | Measurement of Gas Flow by Turbine Meters | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 75, Appendix A, Section 2.1.1.1(c) | ASTM D 129 | 2000 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.76(a) | Drawing No. SA 106C 041 | 1997 | Arm Assembly, Right, Revision A | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.151 Table A | Drawing No. 921022-041 | 2001 | Neck Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 58 Appendix C, 2.9 | AWMA Publicaltion | 1988 | IMPROVE—a new remote area particulate monitoring system for visibility studies, Eldred, R.A., Cahill, T.A., Pitchford, M., and Malm, W.C.; Proceedings of the 81st Annual Meeting of the Air Pollution Control Association, Paper 88-54.3 | Air and Waste Management Association | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-429d | 1967 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Coast Guard | 46 CFR 147.45(f)(5) | UL 1313 | 1985 | Standard for Nonmetallic Safety Cans for Petroleum Products | Underwriters Laboratories, Inc. | |
Research and Special Programs Administration | 49 CFR 195.106(e) | ASTM A 333/A 333M | 2005 | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IG (Ethalfluralin) | EPA Method 627 | 1997 | Dinitroaniline Pesticides by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(n)(4) | NCASI Method IM/CAN/WP-99.02 | 2004 | Impinger/Canister Source Sampling Method For Selected HAPs and Other Compounds at Wood Products Facilities | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
Coast Guard | 46 CFR 114.600(b) | IEEE 45 | 1977 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 160.052-4(b) | 46 CFR 160.055 | 2012 | Life Preserver, Unicellular Plastic Foam, Adult and Child NDG | U.S. Coast Guard | |
Research and Special Programs Administration | 49 CFR 173.315 Table Note 17 | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (9) Chromium | APHA Method 3120 B | 1992 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Animal and Plant Health Inspection Service | 21 CFR 165.110(b)(4)(iii)(I)(7)(i) | APHA Method 4500-ClO2 D | 1992 | Chlorine Dioxide, (Reserved) | American Public Health Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.153(b) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(12) | NFPA 58 | 1969 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 201.327(i)(1)(ii)(C) | ISO 17166 CIE S 007/E | 2000 | Erythemal reference action spectrum and standard erythema dose | International Organization for Standardization | |
Federal Railroad Administration | 49 CFR 238 Appendix B Note 3 | California State Technical Bulletin 129 | 1992 | Flammability Test Procedure for Mattresses for Use in Public Buildings | State of California, Department of Consumer Affairs | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(R) | EPA Method 365.3 | 1978 | Phosphorus, All Forms (Colorimetric, Ascorbic Acid, Two Reagent) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.15 Note 3 | EPA Method 1617 | 2015 | Static Sheen Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, Section (2) | SAE J-1989 | 1989 | Recommended Service Procedure for the Containment of R-12 | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.055-1(a)(2) | FedSpec CCC-C-426D | 1995 | Cloth, Drill, Cotton | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1917.44(n)(5)(i) | NHTSA Publication | 2014 | Safety Precautions for Mounting and Demounting Tube-Type Truck/Bus Tires | National Highway Traffic Safety Administration, U.S. Department of Transportation |