Coast Guard |
|
46 CFR 197.328(c)(2)(ii) |
ASME BPVC VIII 1-2 |
2000 |
Boiler and Pressure Vessel Code, Section VIII, Divisions 1 and 2
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (8) |
EPA Method 610 (GC) |
1982 |
Polynuclear Hydrocarbons by GC/FID
|
U.S. Environmental Protection Agency |
Housing and Urban Development Department |
|
24 CFR 200.925c(c)(3) |
ICBO Uniform Mechanical Code |
1991 |
Uniform Mechanical Code
|
International Conference of Building Officials |
Research and Special Programs Administration |
|
18 CFR 38.2(a)(7) |
NAESB Publication |
2009 |
Inadvertent Interchange Payback with minor corrections
|
North American Energy Standards Board Wholesale Electric Quadrant |
Environmental Protection Agency |
|
40 CFR 63.4141(b)(1) |
ASTM D2697 |
1986 |
Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
|
ASTM International |
Health and Human Services Department |
|
45 CFR 162.1802(a)(2) |
ASC X12N 837 |
2000 |
Health Care Claim: Dental, version 4010
|
Washington Publishing Company |
Coast Guard |
|
46 CFR 161.006-4(h) |
FedSpec QQ-B-611 |
1938 |
Brass, Commercial: Bars, Plates, Rods Shape, Sheets and Strip
|
Federal Specifications Standards and Test Methods |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (22) |
EPA Method 200.7 |
1994 |
ICP - metals, Revision 4.4
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.21(f)(3) Note |
APHA Method 9222 A |
1997 |
Membrane Filter Technique for Members of the Coliform Group
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 799.9120(f)(5) |
OECD No. 420 |
1992 |
Guidelines for Testing of Chemicals, Acute Oral Toxicity—Fixed Dose Method
|
Organization for Economic Cooperation and Development |
Federal Highway Administration |
|
23 CFR 625.4(b)(1) |
AASHTO Standard Specifications for Highway Bridges, 17th ed. |
2002 |
Standard Specifications for Highway Bridges
|
American Association of State Highway and Transportation Officials |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Terbutryn) |
EPA Method 619 |
1993 |
Triazine Pesticides by Liquid/Liquid Extraction and GC/NPD
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 419.13(c)(1)(i) |
EPA-440-1-82-014 |
1985 |
Development Document for Effluent Limitations Guidelines, New Source Performance Standards, and Pretreatment Standards for the Petroleum Refining Point Source Category, Table III-7, pp. 49-54.
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 80.47(h)(1) |
ASTM D86 |
2007 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
Food and Drug Administration |
|
21 CFR 178.3910(a)(4)(iii) Footnote 1 |
NIST Circular 484 |
1949 |
Spectrophotometry
|
National Institute of Standards and Technology, U.S. Department of Commerce |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (31) |
USGS I-4515-91 |
1993 |
Total Kjeldahl Nitrogen - Block Digest, Phenate
|
U.S. Geological Survey |
Consumer Product Safety Commission |
|
16 CFR 1615.32(a)(1) |
AATCC 124 |
1996 |
Appearance of Durable Press Fabrics After Repeated Home Laundering
|
American Association of Textile Chemists and Colorists |
Environmental Protection Agency |
|
40 CFR 63.14(c)(3) |
AOAC Method 957.02 |
1995 |
Phosphorus (Total) in Fertilizers, Preparation of Sample Solution, Sixteenth edition
|
AOAC International |
Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
ASTM A370 |
1994 |
Standard Test Method and Definitions for Mechanical Testing of Steel Products
|
ASTM International |
Rural Utilities Service |
|
7 CFR 1755.870(n)(2) |
ASTM E29 |
1990 |
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60.564(j)(1)(i) |
ASTM D3370 |
1976 |
Standard Practices for Sampling Water
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 3280.604(b)(2) |
IAPMO PS 9 |
1984 |
Material and Property Standard for Diversion Tees and Twin Waste Elbow
|
International Association of Plumbing and Mechanical Officials |
Coast Guard |
|
46 CFR 160.013-3(a) |
FedSpec GGG-A-926 |
1999 |
Axes
|
Federal Specifications Standards and Test Methods |
National Highway Traffic Safety Administration |
|
49 CFR 572.172(a) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
Environmental Protection Agency |
|
40 CFR 75, Appendix F, Section 3.3.6.1 |
ASTM D5291 |
2002 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
|
ASTM International |
Federal Communications Commission |
|
47 CFR 15.38(b)(6) |
ANSI C63.4 |
2003 |
Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 63, Subpart DDDD, Table 4, (7) |
NCASI Method IM/CAN/WP-99.02 |
2004 |
Impinger/Canister Source Sampling Method For Selected HAPs and Other Compounds at Wood Products Facilities
|
National Council of the Paper Industry for Air and Stream Improvement, Inc. |
Energy Department |
|
10 CFR 431.86(b) |
HI BTS-2000 |
2001 |
Method to Determine Efficiency of Commercial Space Heating Boilers
|
Hydronics Institute |
Health and Human Services Department |
|
45 CFR 162.1402(b)(2) |
ASC X12N 276/277 |
2006 |
Health Care Claim Status Request and Response
|
Washington Publishing Company |
National Highway Traffic Safety Administration |
|
49 CFR 571.5(d)(14) |
ASTM D756 |
1978 |
Standard Practice for Determination of Weight and Shape Changes of Plastics under Accelerated Service Conditions
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (34) |
EPA Method 617 |
1993 |
Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 143.4(b) Table (Sulfate) |
EPA Method 375.2 |
1993 |
Sulfate (Colorimetric, Automated, Methylthymol Blue, AA II), Revision 2.0
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 63.1208(b)(5)(i)(C)(5) |
ASTM D6735 |
2001 |
Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources--Impinger Method
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (34) |
APHA Method 6200 B |
1997 |
Volatile Organic Compounds by Purge and Trap GC/MS
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 141.24(h)(13)(ii) |
EPA Method 505 |
1995 |
Organohalide pesticides/PCBs (Drinking Water)
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 60.107a(e)(2)(v) |
ASTM D4468 |
1985 |
Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Calorimetry
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1926.552(c)(16) |
ANSI A10.4 |
1963 |
Safety Requirements for Workmen's Hoists
|
American National Standards Institute |
Coast Guard |
|
40 CFR 136.3(a) Table IB (3) |
APHA Method 3113 B |
2004 |
Metals by Graphite Furnace Atomic Absorption
|
American Public Health Association |
Coast Guard |
|
46 CFR 56.01-2(e)(54) |
ASTM B124 |
1996 |
Standard Specification for Copper and Copper-Alloy Forging Rod, Bar, and Shapes
|
ASTM International |
Architectural and Transportation Barriers Compliance Board |
|
36 CFR 1191, App D, 1005.2.1 |
ICC/IBC |
2003 |
International Building Code
|
International Code Council |
National Highway Traffic Safety Administration |
|
49 CFR 572.20 |
Drawing No. SA 103C 082 |
1976 |
Foot Assembly, Right
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
Coast Guard |
|
33 CFR 154, Appendix B, 3.1 |
ASTM F722 |
1982 |
Standard Specification for Welded Joints for Shipboard Piping Systems
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(44) |
ANSI S1.4 |
1976 |
Specification for Sound Level Meters
|
American National Standards Institute |
Federal Motor Carrier Safety Administration |
|
49 CFR 393.95(f)(1) |
FMVSS 125 |
1998 |
Motorcycle Controls and Displays
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
Occupational Safety and Health Administration |
|
29 CFR 1918.104(b)(2) |
ASTM F2412 |
2005 |
Standard Test Methods for Foot Protection
|
ASTM International |
Minerals Management Service |
|
30 CFR 250.1628(b)(2) |
API RP 14E |
2000 |
Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems
|
American Petroleum Institute |
Coast Guard |
|
46 CFR 111.54-1(a)(1) |
NEC 2002 |
2002 |
National Electrical Code Handbook
|
National Fire Protection Association |
Federal Railroad Administration |
|
49 CFR 223 Appendix A (b)(10)(ii) |
ASTM C33 |
1977 |
Standard Specification for Lightweight Aggregates for Concrete Masonry Units
|
ASTM International |
Coast Guard |
|
46 CFR 56.01-2(e)(5) |
ASTM A126 |
1995 |
Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 5, 1(c) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |