This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 80.84(d)(1)(i) | ASTM D86 | 2001 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Coast Guard | 46 CFR 12.02-11(a)(1) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 7 CFR 1728.201(j)(4) | AWPA A7 | 1975 | Standard Wet Ashing Procedure for Preparing Wood for Chemical Analysis | American Wood Protection Association | |
Rural Utilities Service | 7 CFR 1755.902(c)(4)(i) | ASTM D4565 | 1999 | Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Research and Special Programs Administration | 49 CFR 193.2101 | NFPA 59A | 2001 | Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG) | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60.632(f) | ASTM E169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(v) | ANSI Z41 | 1991 | Protective Footwear | American National Standards Institute | |
Coast Guard | 46 CFR 160.055-1(b) | Drawing No. 160.055-1B, Sheet 2 | 2012 | Life Preservers, Unicellular Foam, Child, Buoyant Inserts, Model 63 | U.S. Coast Guard | |
National Highway Traffic Safety Administration | 49 CFR 572.174(b)(1) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Rural Utilities Service | 7 CFR 1755.390, Appendix A III(5)(c) | ASTM D4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-1252B | 1976 | Insulation, Thermal Reflective (Aluminum Foil) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 110.10-1(g)(13) | IEC 60079-15 | 2001 | Electrical Apparatus for Explosive Gas Atmospheres—Part 15: Type of Protection “n”, Second Edition | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 63.1208(b)(5)(ii)(B) | ASTM D6735 | 2001 | Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources--Impinger Method | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(11) | ASTM D5 | 1965 | Test for Penetration by Bituminous Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID Footnote 8 | 3M Test Method 0222 | 1994 | Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk | 3M Corporation | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(37) | ASTM G151 | 1997 | Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (36) | APHA Method 6630 C | 2000 | Organochlorine Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Total Disolved Solids) | APHA Method 2540 C | 1992 | Solids, Total Dissolved Solids Dried at 180 degrees C | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart IIII, Appendix A, Section 4.1 | EPA-450-3-88-018 | 1988 | Protocol for Determining Daily Volatile Organic Compound Emission Rate of Automobile and Light-Duty Truck Topcoat Operations | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1918.101(a)(1)(i)(C) | ANSI Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 56.2 Potable water | 40 CFR 141 | 1974 | National Primary Drinking Water Regulations | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (39) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | EPA Method 904.0 | 1980 | Radium-228, Report No. 600-4-80-032 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D129 | 1978 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
National Highway Traffic Safety Administration | 24 CFR 3280.404(b) | AAMA 1701.2 | 1995 | Primary Window and Sliding Glass Door Voluntary Standard for Utilization in Manufactured Housing | American Architectural Manufacturers Association | |
Mine Safety and Health Administration | 30 CFR 57.14130(j) | SAE J-1194 | 1983 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 10.3 | EPA Method 7470 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SSW-846 Third Edition | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.01-2(e)(51) | ASTM B88 | 1996 | Standard Specification for Seamless Copper Water Tube | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(147) | ASTM D4084 | 1982 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.106 S12.7(b) | ASTM D4329 | 1999 | Standard Practice for Fluorescent UV Exposure of Plastics | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(21) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 108, 7.1.3 | ASTM D1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 141.25(a) Table Note 8 | DOE HASL-300 | 1990 | DOE EML Procedures Manual, 27th Edition, Volume 1 | U.S. Department of Energy | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(28) | ASTM D4052 | 2011 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter | ASTM International | |
Coast Guard | 46 CFR 59.10-5(k) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 164.120-7, Table 156.120-7(d)(4)(i) | ASTM D543 | 2006 | Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (39) | EPA Method 353.2 | 1993 | Determination of Nitrate-Nitrite Nitrogen by Automated Colorimetry, Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | APHA Method 4500-CN E | 1995 | Cyanide by Colorimetric Determination | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 11.2.2 | ASTM D2369 | 1987 | Standard Test Method for Volatile Content of Coatings | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(1) | ACI 318R-95 | 1995 | Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute | |
Coast Guard | 33 CFR 183.540(a) | SAE J-1527 | 1985 | Marine Fuel Hoses | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 177.1990(c)(3) | FDA Publication | 1986 | Residual Methyl Acrylate and Vinylidene Chloride Monomers in Saran MA/VDC Resins and Pellets by headspace Gas Chromatography | Food and Drug Administration, U.S. Department of Health and Human Services | |
National Highway Traffic Safety Administration | 49 CFR 572.187(c)(2) | Drawing No. 175-9000 | 2009 | Headform assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 14 | Quanti-Tray® Method | 2002 | Quanti-Tray® Method | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (1) | ASTM D5673 | 1996 | Standard Test Method for Elements in Water by Inductively Coupled Plasma--Mass Spectrometry | ASTM International | |
Coast Guard | 46 CFR 160.076-21(a) | UL 1191 | 2008 | Standard for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 86.1(g)(19) | SAE J-1979 | 1997 | E/E Diagnostic Test Modes | Society of Automotive Engineers | |
Energy Department | 10 CFR 434.404.1 | ANSI Z21.56 | 1994 | Gas-Fired Pool Heaters (RS-38) | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.20 | Drawing No. SA 103C 041 | 1976 | Upper Arm Assembly, Left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 69 | EPA Method 1627 | 2011 | Kinetic Test Method for the Prediction of Mine Drainage Quality, EPA-821-R-09-002 | U.S. Environmental Protection Agency |