This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 52, Subpart QQ | SDSIP | 1979 | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of South Dakota | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME B16.26 | 1988 | Cast Copper Alloy Fittings for Flared Copper Tubes | American Society of Mechanical Engineers | |
Minerals Management Service | 30 CFR 250.1629(b)(4)(v) | API RP 14F | 2008 | Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 21 CFR 131.170(f) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) C6 | ASTM A 671 | 2004 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE 957 | 2005 | Guide for Cleaning Insulators | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 61.04(c)(1)(i) | NH State Regulations, Env-Sw 2100 | 2010 | Management and Control of Asbestos Disposal Sites Not Operated after July 9, 1981, (including a letter from Commissioner, Department of Environmental Services, State of New Hampshire, dated February 12, 2010, Env-Sw 2100) | State of New Hampshire | |
National Archives and Records Administration | 36 CFR 1238.10(a)(2) | AIIM MS14 | 1996 | Specifications for 16mm and 35mm Roll Microfilm | Association for Information and Image Management | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (43) | EPA Method 553 | 1992 | Determination of Benzidines and Nitrogen-Containing Pesticides in Water by Liquid-Liquid Extraction or Liquid-Solid Extraction and Reverse Phase High Performance Liquid Chromatography/Particle Beam/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.1401(a)(1) | NEUIC regulations | 1987 | Nebraska Environmental Protection Act, Revised Statutes of Nebraska sections 81-1502, 81-1506, 81-1519, and 81-1520 | State of Nebraska | |
Grain Inspection, Packers and Stockyards Administration | 9 CFR 381.409(c)(6) | USDA Handbook 74 | 1973 | Energy Values of Foods: Basis and Derivation | U.S. Department of Agriculture | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.937(c)(1) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 172.878(a)(3) | AOAC Journal | 1962 | Journal of the Association of Official Analytical Chemists, Volume 45, page 66 | AOAC International | |
Veterans Affairs Department | 38 CFR 17.74(p) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(47) | SAE RM-66-04 | 1995 | Compatibility Fluid, Appendix B to SAE Standard J1703 JAN95, Motor Vehicle Brake Fluid | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (47) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 2460 | 1990 | Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D 1552 | 2003 | Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.920(d) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.100(b)(2) | ANSI Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 25, Section 7.1.3 | ASTM D 2986 | 1995 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Coast Guard | 46 CFR 161.002-4(b)(1) | FM Class No. 3230-3250 | 1976 | Smoke Actuated Detectors for Automatic Fire Alarm Signaling | Factory Mutual Engineering and Research | |
Research and Special Programs Administration | 46 CFR 111.30-1 | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 164.007-1(b) | ASTM E 119 | 1998 | Standard Test Methods for Fire Tests of Building Construction and Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 147.550(a)(1) | GAUIC regulations | 1988 | Oil and Gas and Deep Drilling Act of 1975, Official Code of Georgia Annotated (O.C.G.A.) §§ 12-4-40 through 12-4-53 | State of Georgia | |
Rural Utilities Service | 7 CFR 1755.702(g)(2) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Health and Human Services Department | 45 CFR 162.1203(a)(10) | CAQH Publication | 2011 | Phase II CORE 270: Connectivity Rule, version 2.2.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5320-6B | 1974 | Airport Pavement Design and Evaluation (Through Change 1, 1974) | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 38 | EPA Method 1664 | 1999 | n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT–HEM; Non-polar Material) by Extraction and Gravimetry, Revision A | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | Industrial Method 129-71W | 1972 | Fluoride in Water and Wastewater | Bran & Luebbe Analyzing Technologies, Inc. | |
Housing and Urban Development Department | 24 CFR 3280.703 | UL 1096 | 1986 | Electrical Central Air Heating Equipment, Fourth Edition, with Revisions July 16, 1986, and January 30, 1988 | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.077-2(l) | IMO SOLAS 74/83 | 1983 | 1983 Amendments to the International Convention for the Safety of Life at Sea, 1974 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 80.46(h)(1)(iii) | ASTM D 2622 | 2010 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Coast Guard | 46 CFR 164.023-3(b)(3) | Federal Standard 191A | 1978 | Method 5804, Weathering Resistance of Cloth; Accelerated Weathering Method | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 39.2001(e) | IMO SOLAS | 1986 | International Convention for the Safety of Life at Sea, Consolidated Text of the 1974 SOLAS Convention, the 1978 SOLAS Protocol, the 1981 and 1983 SOLAS Amendments | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1043.30(f)(1) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(S) | EPA Method 637 | 1993 | MBTS and TCMTB by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 86.1(g)(15) | SAE J-1939-73 | 2006 | Application Layer—Diagnostics | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 173.370(c) | Ecolab Publication | 2000 | Hydrogen Peroxide and Peracid (as Peracetic Acid) Content | Ecolab Inc. | |
Energy Department | 10 CFR 430 Subpart B, App. T, 3b | ASME A112.19.6 | 1995 | Hydraulic Requirements for Water Closets and Urinals | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.151-5(d)(5) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 147.2200(a)(2) | TXUIC regulations | 2002 | Texas Statutory and Regulatory Requirements Applicable to the Underground Injection Control Program for Class III Brine Mining Wells | State of Texas | |
Environmental Protection Agency | 40 CFR 63.459(b)(8)(iii) | NCASI Method DI/MEOH-94.03 | 2000 | Methanol in Process Liquids and Wastewaters by GC/FID | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 612 | 1983 | Block and Board Insulation | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(8)(i) | ANSI H38.7 | 1969 | Specification for Aluminum Alloy Seamless Pipe and Seamless Extruded Tube | American National Standards Institute | |
National Archives and Records Administration | 36 CFR 1237.16(b) | ISO 18911 | 2000 | Imaging Materials--Processed Safety Photographic Film--Storage Practices | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix A Section 1910.158 (7) | NFPA 14 | 2013 | Standpipe and Hose Systems | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.18.1M | 1989 | Plumbing Fixture Fittings | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 75.1101-7(a) | NFPA 13 | 1969 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association |