This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 282.56(d)(1)(i)(A) | CTUSTP | 1996 | Connecticut Statutory Requirements Applicable to the Underground Storage Tank Program | State of Connecticut | |
Rural Utilities Service | 7 CFR 1755.860(m)(7)(ii) | ASTM D4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Environmental Protection Agency | 40 CFR 60.111a(b) Petroleum liquids | ASTM D396 | 1978 | Standard Specification for Fuel Oils | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(11) | CGA Standard Hose Connection Standard, 1957 | 1957 | Standard Hose Connection Standard | Compressed Gas Association | |
Coast Guard | 46 CFR 154.188 | ABS Publication | 1981 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 572.146(j) | Drawing No. 210-4540-2 | 1994 | No title given | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Pentachlorophenol) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.268(n)(11)(v) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Energy Department | 10 CFR 434.701.1 RS-45 | ARI 330 | 1993 | Ground-Source Closed-Loop Heat Pumps (RS-45) | Air Conditioning and Refrigeration Institute | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(6)(ii)(C)(2) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section XI | American Society of Mechanical Engineers | |
Federal Railroad Administration | 49 CFR 232.603(a) | AAR S-4210 | 2007 | ECP Cable-Based Brake System Cable, Connectors, and Junction Boxes—Performance Specifications | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (22) | EPA Method 622 | 1993 | Organophosphorus Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Chloride) | APHA Method 4500-Cl D | 1998 | Chlorine, Amperometric direct | American Public Health Association | |
Coast Guard | 40 CFR 136.3(a) Table IB (22) | ASTM D1688B | 2007 | Standard Test Methods for Copper in Water, Atomic Absorption, Chelation-Extraction | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM D240 | 2009 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Hexachlorocyclopentadiene) | EPA Method 508 | 1990 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.106a(a)(2)(iii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI/NSF 14 | 1990 | Plastic Piping Components and Related Materials | National Sanitation Foundation | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(1)(ii) | EPA Method 200.8 | 1991 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 430.32(n)(2)(i) | ANSI C78.81 | 2010 | Electric Lamps - Double-Capped Fluorescent Lamps - Dimensional and Electrical Characteristics | American National Standards Institute | |
Coast Guard | 46 CFR 111.30-19(b)(4) | IEC 332-1 | 1993 | Test on Electric Cables Under Fire Conditions, Part 1: Test on a Single Vertical Insulated Wire or Cable | International Electrotechnical Commission | |
Research and Special Programs Administration | 49 CFR 195.3(c) E5 | ASTM A671 | 2004 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures | ASTM International | |
Coast Guard | 46 CFR 35.01-3(b) | ASTM F1014 | 1992 | Standard Specification for Flashlights on Vessels | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(32) | ANSI B175.1 | 1991 | Safety Requirements for Gasoline-Powered Chain Saws | American National Standards Institute | |
Federal Motor Carrier Safety Administration | 49 CFR 393.11(a)(1) | FMVSS 108 | 1998 | Lamps, Reflective Devices, and Associated Equipment | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Housing and Urban Development Department | 24 CFR 200.944(a)(4) | APA PRP-108 | 1988 | Performance Standards and Policies for Structural Use Panels | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (22) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(78) | ASTM D6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. R, 2.1 | CIE 13.3 | 1995 | Technical Report: Method of Measuring and Specifying Colour Rendering Properties of Light Sources | International Commission on Illumination | |
Coast Guard | 46 CFR 164.015-4(g)(2) | ASTM D1692T | 1968 | Test for Flammability of Plastic Sheeting and Cellular Plastics | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (31) | OIA Method PAI-DK01 | 1994 | Nitrogen Kjeldahl, (Block Digestion, Steam Distillation, Tritrimetric Detection) | OI Analytical | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (5) Barium | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 2.6.2 | EPA-600-4-79-057 | 1979 | Technical Assistance Document for the Calibration of Ambient Ozone Monitors | U.S. Environmental Protection Agency | |
Interior Department | 43 CFR 11.18(a)(4) | DOI NRDAM/CME | 1999 | The CERCLA Type A Natural Resource Damage Assessment Model for Coastal and Marine Environments Technical Documentation, Volumes I-VI, dated April 1996, including Revision I dated October 1997, and Revision II dated December 1999 | U.S. Department of the Interior | |
Environmental Protection Agency | 40 CFR 136.3(b)(1)(i)(A) | EPA-600-8-78-017 | 1978 | Microbiological Methods for Monitoring the Environment, Water, and Wastes, Part III Analytical Methodology, Section B Total Coliform Methods, page 108 | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 172.723(b)(2) | AOCS Method Cd 1-25 | 1993 | Iodine Value of Fats and Oils Wijs Method | American Oil Chemists Society | |
Environmental Protection Agency | 40 CFR 435.11(u) | EPA Method 1654 A | 1992 | PAH Content of Oil by HPLC/UV, Revision A | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.1426(f)(9)(ii) | ASTM D6866 | 2013 | Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis | ASTM International | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.2.5 | ASTM D1552 | 2001 | Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IA | APHA Method 9230 C | 2007 | Fecal Streptococcus and Enterococcus Groups, Membrane Filter Techniques | American Public Health Association | |
Research and Special Programs Administration | 49 CFR 173.1(c) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (2) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 434.402.4.2 | ASHRAE 90.1 | 1989 | Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings with addenda (RS-1) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-429e | 1969 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Energy Department | 10 CFR 430 Subpart B, App. N, 8.6.2 | IEC 62301 | 2005 | Household Electrical Appliances--Measurement of Standby Power | International Electrotechnical Commission | |
Rural Utilities Service | 7 CFR 1755.890(l)(5) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 13.3.1 | EPA SW-846 | 1996 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Third Edition | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.6(j)(1) | ASTM A370 | 1968 | Methods and Definitions for Mechanical Testing of Steel Products | ASTM International | |
Coast Guard | 46 CFR 160.060-5(c) | Drawing No. 160.060-1, Sheet 6 | 2012 | Buoyant Vest, Unicellular Polyethylene Foam, Adult and Child, Insert Pattern, Model CYS | U.S. Coast Guard | |
National Highway Traffic Safety Administration | 49 CFR 572.1`77(b)(8) | Drawing No. SA-572-S4 | 1987 | Accelerometer Specification | Reprographic Technologies |