Environmental Protection Agency |
|
40 CFR 60 Subpart JJJJ, Table 2(1)(c)(ii) |
ASTM D6522 |
2000 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
Food and Drug Administration |
|
21 CFR 165.110(b)(4)(iii)(E)(2)(iii) |
EPA-600-4-91-010 |
1991 |
Method 200.7--Determination of Metals and Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Atomic Emission Spectrometry
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 52.741(a)(3), Heavy Liquid |
ASTM D2879 |
1986 |
Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
|
ASTM International |
Research and Special Programs Administration |
|
10 CFR 430.2, Definitions, Rough service lamp |
IESNA Handbook |
2000 |
The IESNA Lighting Handbook
|
Illuminating Engineering Society of North America |
Coast Guard |
|
40 CFR 86.1910(c)(1) |
ASTM D975 |
2013 |
Standard Specification for Diesel Fuel Oils
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 90.7(b)(1) Table |
ASTM D2699 |
1992 |
Standard Test Method for Knock Characteristics of Motor Fuels by the Research Method
|
ASTM International |
Coast Guard |
|
46 CFR 160.151-21(u) |
IMO Resolution MSC.293(87) |
2010 |
Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code
|
International Maritime Organization |
Coast Guard |
|
46 CFR 197.300(d) |
ANSI B31.1 |
2013 |
Code for Pressure Piping
|
American National Standards Institute |
Energy Department |
|
10 CFR 430 Subpart B, App. O, 2.1.1 |
UL 730 |
1974 |
Oil-Fired Wall Furnaces
|
Underwriters Laboratories, Inc. |
Environmental Protection Agency |
|
40 CFR 63.3151(b) |
ASTM D1475 |
1998 |
Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
|
ASTM International |
Health and Human Services Department |
|
45 CFR 162.1602(a) |
ASC X12N 835 |
2000 |
Health Care Claim Payment/Advice
|
Washington Publishing Company |
Coast Guard |
|
46 CFR 160.176-4(b) |
UL 1191 |
1984 |
Standard for Components for Personal Flotation Devices
|
Underwriters Laboratories, Inc. |
National Highway Traffic Safety Administration |
|
49 CFR 572.146(j) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Pentachlorophenol) |
EPA Method 1625 |
1984 |
Semivolatile Organic Compounds by Isotope Dilution GC/MS
|
U.S. Environmental Protection Agency |
Federal Railroad Administration |
|
49 CFR 232.603(a) |
AAR S-4220 |
2002 |
ECP Cable-Based Brake DC Power Supply—Performance Specification, Version 2.0
|
Association of American Railroads |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (23) |
EPA Method 507 |
1995 |
Nitrogen & Phosphorous Pesticides (Drinking Water)
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 55.14(e)(3)(ii)(G) |
40 CFR part 52, subpart F |
2009 |
State of California, South Coast Air Quality Management District Requirements Applicable to OCS Sources (Parts I, II and III)
|
U.S. Environmental Protection Agency |
Architectural and Transportation Barriers Compliance Board |
|
36 CFR 1191, App D, 408.3.2.1 |
BHMA A156.19 |
1997 |
Power Assist and Low Energy Power Operated Doors
|
Builders Hardware Manufacturers Association |
Occupational Safety and Health Administration |
|
29 CFR 1910.106(b)(1)(iv)(C) |
UL 58 |
1961 |
Steel Underground Tanks for Flammable and Combustible Liquids
|
Underwriters Laboratories, Inc. |
Research and Special Programs Administration |
|
40 CFR 136.3(a) Table IB (23) |
APHA Method 4500-CN D |
1999 |
Cyanide by Titrimetric Method
|
American Public Health Association |
Coast Guard |
|
46 CFR 182.710(c)(2) |
ANSI B31.1 |
1986 |
Code for Pressure Piping
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 430, Appendix A, Method 1653 (18.10) |
EPA Method 330.4 |
1979 |
Total Residual Chlorine
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 80.165(c)(1)(ii) |
ASTM D5598 |
2001 |
Standard Specification for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.111(b)(2)(ii) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VIII, Paragraphs 125 to 128, 132, and 133
|
American Society of Mechanical Engineers |
Minerals Management Service |
|
30 CFR 250.1202(l)(4) |
API MPMS |
2007 |
Chapter 11, Section 1
|
American Petroleum Institute |
Coast Guard |
|
21 CFR 145.3(n) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
Environmental Protection Agency |
|
40 CFR 52.741(w)(1)(i) |
35 I.A.C. 215, Subpart Z |
1989 |
Administrative Code
|
State of Illinois |
Rural Utilities Service |
|
7 CFR 1755.870(i)(1) |
ASTM D4565 |
1990 |
Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 |
ASTM D3177 |
1989 |
Standard Test Method for Total Sulfur in the Analysis Sample of Coal and Coke
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(s)(3) |
NIOSH Publication |
1987 |
NIOSH Recommendations for Occupational Safety and Health Standards
|
National Institute for Occupational Safety and Health |
Coast Guard |
|
46 CFR 160.010-3(a)(16) |
IMO LSA Code |
2010 |
Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances
|
International Maritime Organization |
Housing and Urban Development Department |
|
24 CFR 3280.703 |
ANSI Z21.22/CSA 4.4-M |
1999 |
Relief Valves and Automatic Gas Shutoff Devices for Hot Water Supply Systems
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 61.18(d)(1) |
EPA SW-846 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Third Edition, as amended by Revision I, December 1987
|
U.S. Environmental Protection Agency |
Energy Department |
|
10 CFR 431.76(d)(1) |
ANSI Z21.47 |
1998 |
Gas-Fired Central Furnaces
|
American National Standards Institute |
Health and Human Services Department |
|
45 CFR 162.1102(b)(2)(ii) |
ASC X12N 837 |
2006 |
Health Care Claim: Dental
|
Washington Publishing Company |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (22) |
APHA Method 6200 B |
1997 |
Volatile Organic Compounds by Purge and Trap GC/MS
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB Footnote 39 |
OIA Method PAI-DK01 |
1994 |
Nitrogen Kjeldahl, (Block Digestion, Steam Distillation, Tritrimetric Detection)
|
OI Analytical |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (5) Barium |
EPA Method 200.8 |
1994 |
Metals by ICP-MS
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 143.4(b) Table (Zinc) |
APHA Method 3111 B |
1999 |
Metals by Flame Atomic Absorption
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 63.4941(b)(3) |
ASTM D1475 |
1990 |
Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1926.900(k)(5) |
IME Publication 20 |
1971 |
Radio Frequency Energy—A Potential Hazard in the Use of Electric Blasting Caps
|
Institute of Makers of Explosives |
Coast Guard |
|
46 CFR 111.105-11(a) |
UL 913 |
2003 |
Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III Division 1, Hazardous (Classified) Locations
|
Underwriters Laboratories, Inc. |
Environmental Protection Agency |
|
40 CFR 136.3(b)(1)(i)(B) |
EPA-600-8-78-017 |
1978 |
Microbiological Methods for Monitoring the Environment, Water, and Wastes, Part III Analytical Methodology, Section B Total Coliform Methods, 2.6.2 Two-Step Enrichment Procedure, page 111
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.25(a) Table |
APHA Method 7110 B |
2000 |
Gross alpha/beta - Evaporation
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 60.4415(a)(1)(i) |
ASTM D1552 |
2003 |
Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
|
ASTM International |
Food and Drug Administration |
|
16 CFR 1616.2 Footnote 2 |
ANSI Z535.1 |
1998 |
Standard for Safety Color Code
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 435.15 Note 11(a) |
EPA Method 1644 |
2015 |
Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds
|
U.S. Environmental Protection Agency |
Federal Railroad Administration |
|
49 CFR 214.115(b) |
ANSI Z41 |
1991 |
Protective Footwear
|
American National Standards Institute |
Coast Guard |
|
40 CFR 60.106(j)(2) |
ASTM D1266 |
1998 |
Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60.17(g)(64) |
ASTM D1826 |
1977 |
Standard Test Method for Calorific Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
|
ASTM International |