This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60.106a(a)(1)(vi) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.261(h)(1) | 29 CFR 1910.23 | 2014 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards | Occupational Safety and Health Administration, U.S. Department of Labor | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-45 | 2003 | Bypass and Drain Connection Standard | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 160.151-21(d) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 587.6(b) | Drawing No. DSL-1284 | 1980 | Side Impact Moving Deformable Barrier Drawings | Reprographic Technologies | |
Coast Guard | 46 CFR 175.600(b) Table | UL 1570 | 1995 | Fluorescent Lighting Fixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.01-2(e)(13) | ASTM A 194/A 194M | 1998 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service or Both | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1208(b)(5)(ii)(B) | ASTM D 6735 | 2001 | Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources--Impinger Method | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(4) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII, Paragraph UG-84 | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 430 Subpart B, App. N, 2.2 | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.135-5(b)(5) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Coast Guard | 40 CFR 60.106(j)(2) | ASTM D 1266 | 1998 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) | ASTM International | |
Public Health Service | 42 CFR 52b.12(c)(7)(iv) | NFPA 101 | 1997 | Life Safety Code | National Fire Protection Association | |
Coast Guard | 46 CFR 56.01-2(d)(3) | ASME B&PV Code | 1998 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(34) | ANSI C33.2 | 1956 | Safety Standard for Transformer-Type Arc Welding Machines | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (8) | APHA Method 3111 D | 1999 | Metals by Flame Atomic Absorption, Nitrous Oxide | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(v) | ASTM D 511 | 2008 | Standard Test Methods for Calcium and Magnesium in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(h)(1)(xiv) | ISO 9439:1999(E) | 1999 | Water Quality—Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium—Carbon Dioxide Evolution Test. Second Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 56.01-2(d)(16) | ASME B16.23 | 2002 | Cast Copper Alloy Solder Joint Drainage Fittings: DWV | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.137(k) | Drawing No. SA-572-S27 | 1987 | Lower neck force/moment transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.2.1 | SAE J-1703 | 1983 | Motor Vehicle Brake Fluid | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Heptachlor) | EPA Method 505 | 1995 | Organohalide pesticides/PCBs (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 268.44(o), Table Footnote 4 | EPA SW-846 | 2015 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75.6(a)(3) | ASTM D 287 | 2000 | Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ANSI Z21.21 | 1987 | Automatic Valves for Gas Appliances | American National Standards Institute | |
Coast Guard | 46 CFR 110.10-1(n)(2) | MIL-HDBK-299(SH) | 1989 | Military Handbook Cable Comparison Handbook Data Pertaining to Electric Shipboard Cable Notice 1-1991 (Revision of MIL-HDBK-299(SH)) | Naval Sea Systems Command | |
Research and Special Programs Administration | 49 CFR 179.220-7(a) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE 4a | 2001 | Amendment to IEEE Standard Techniques for High-Voltage Testing | Institute of Electrical and Electronics Engineers | |
Coast Guard | 29 CFR 1910.6(e)(74) | ANSI Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63.99(a)(31)(i) | NJ State Regulations | 1998 | Toxic Catastrophe Prevention Act Program | State of New Jersey | |
Drug Enforcement Administration | 21 CFR 1300.03 FIPS 186-2 | FIPS Publication 186-2 | 2000 | Digital Signature Standard (DSS) | National Institute of Standards and Technology, U.S. Department of Commerce | |
Energy Department | 10 CFR 431.76(e)(1) | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.155(i)(1) | ASTM D 56 | 1969 | Standard Test Method for Flash Point by Tag Closed Tester | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(iv) | ASTM G 21 | 1990 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi | ASTM International | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 103, 7.1.1 | ASTM D 1193 | 1977 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(63) | ASTM D 1552 | 2003 | Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(F)(8) | EPA Method 506 | 1990 | Determination of Phthalate and Adipate Esters in Drinking Water by Liquid-Liquid Extraction or Liquid-Solid Extraction and Gas Chromatography with Photoionization Detection | U.S. Environmental Protection Agency | |
Federal Railroad Administration | 49 CFR 229 Appendix F Verification Guidance (a)(6)(vi) | IEC 61508-6 | 2000 | Part 6: Guidelines on the applications of IEC 61508-2 and -3 | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (15) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.852(c)(1)(i)(E) | APHA Method 9223 | 1998 | Enzyme Substrate Coliform Test, B, Enzyme Substrate Test, Colilert® and Colisure®. | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(f) | ASTM D 6722 | 2006 | Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by the Direct Combustion Analysis | ASTM International | |
Rural Utilities Service | 7 CFR 1755.390(j)(1) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Energy Department | 10 CFR 430.3(e)(6) | ASHRAE 41.6 | 2001 | Standard Method for Measurement of Moist Air Properties | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Housing and Urban Development Department | 24 CFR 200.945(a)(2) | ASTM D 3676 | 1989 | Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay | ASTM International | |
Federal Communications Commission | 47 CFR 15.120(d)(1) | EIA-744 | 1997 | Transport of Content Advisory Information Using Extended Data Service (XDS) | Electronic Industries Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (10) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Benzo(a)pyrene) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart DDDD, Table 9, Mercury | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1223.2 | ASTM F2088 | 2013 | Standard Consumer Safety Specification for Portable Bed Rails | ASTM International | |
Coast Guard | 46 CFR 111.81-1(d) | IEC 92-201 | 1994 | Electrical Installation in Ships, Part 201: System Design-General, Fourth Edition | International Electrotechnical Commission |