This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 430 Subpart B, App. R, 4.5.1 | CIE 13.3 | 1995 | Technical Report: Method of Measuring and Specifying Colour Rendering Properties of Light Sources | International Commission on Illumination | |
Coast Guard | 46 CFR 160.010-3(a)(4) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.171(a)(2) | NHTSA Publication | 2011 | Parts List and Drawings, Part 572 Subpart T, Hybrid III 10-Year-Old Child Test Dummy (HIII-10C) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 30 CFR 75.1107-17 | NFPA 15 | 1969 | Standard for Water Spray Fixed Systems for Fire Protection | National Fire Protection Association | |
Rural Utilities Service | 7 CFR 1755.902(b)(2) | ITU-T Recommendation G.652 | 2005 | Series G: Transmission Systems and Media, Digital Systems and Networks, Transmission media characteristics—Optical fibre cables, Characteristics of a single-mode optical fibre and cable | International Telecommunication Union--Telecommunication | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(6) | Drawing No. SA-SID-M081 | 1987 | Leg Assembly, Left | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 60.111(b) | ASTM D2880 | 1978 | Standard Specification for Gas Turbine Fuel Oils | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(31) | NFPA 505 | 1969 | Standard for Type Designations, Areas of Use, Maintenance, and Operation of Powered Industrial Trucks | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A119.19.10 | 1994 | Dual Flush Devices for Water Closets | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 563.5 Stability control | FMVSS No. 126 | 2007 | Electronic stability control systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (32) | USGS O-2002-01 | 2001 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides and Selected Degradates in Water by C-18 Solid-Phase Extraction and GC/MS | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Silver) | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart ZZZZ, Table 4, (3)(a)(ii)(1) | ASTM D6522 | 2000 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B315 | 1993 | Seamless Copper Alloy Pipe Tube | ASTM International | |
Rural Utilities Service | 7 CFR 1728.202(f)(1)(v)(C) | AWPA A9 | 2001 | Standard Method for Analysis of Treated Wood and Treating Solutions by X-ray Spectroscopy | American Wood Protection Association | |
Coast Guard | 21 CFR 131.206(e) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(7) | ASTM B88 | 1969 | Seamless Copper Water Tube | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (32) | EPA Method 610 (HPLC) | 1982 | Polynuclear Hydrocarbons by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Simazine) | EPA Method 551.1 | 1995 | Determination of Chlorination Disinfection Byproducts, Chlorinated Solvents, and Halogenated Pesticides/Herbicides in Drinking Water by Liquid-Liquid Extraction and Gas Chromatography with Electron-Capture Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.107a(d)(7)(ii) | ASTM D1826 | 1994 | Standard Test Method for Calorific Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.97(a)(3)(ii) | ANSI Z535.1 | 2011 | Safety colors | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.4.2 | ASTM D1121 | 1967 | Standard Method of Test for Reserve Alkalinity of Engine Antifreezes and Antirust | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(13) | SAE J-395 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Crawler Tractors and Crawler-Type Loaders | Society of Automotive Engineers | |
Housing and Urban Development Department | 24 CFR 200.946(a)(1)(xiii) | EIMA Test Method 101.03 | 1995 | Standard Test Method for Determining the Tensile Adhesion Strength of an Exterior Insulation and Finish System (EIFS), Class PB (modified ASTM C297-91) | Exterior Insulation Manufacturers Association | |
Research and Special Programs Administration | 49 CFR 173.115(a)(2) | ASTM E681 | 1985 | Standard Test Method for Concentration Limits of Flammability of Chemicals | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(59) | ASTM D1475 | 1990 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 393.86(a)(6) | FMVSS 223 | 1998 | Rear Impact Guards | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(2)(ii) | ASTM D2471 | 1999 | Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (35) | USGS I-4464-01 | 2001 | Non Potable Water Mercury, Low Level | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (9) Chromium | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 58 Appendix E, 12.0(30) | EPA-600-4-84-070 | 1984 | Philadelphia Roadway Study, Burton, R.M. and J.C. Suggs. | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 179.102-4(a)(2)(ii) | ASTM A370 | 1994 | Standard Test Method and Definitions for Mechanical Testing of Steel Products | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-3, Method 5F, Section 7.2.1 | ASTM D1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA | USGS B-0050-85 | 1989 | Membrane Filtration Quantitative: Fecal Coliform | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 52.741(j)(1)(i) | 35 I.A.C. 215, Subpart R | 1989 | Section 215.445 | State of Illinois | |
Environmental Protection Agency | 40 CFR 63.14(l)(2) | EPA-454-R-98-015 | 1997 | Office of Air Quality Planning and Standards (OAQPS) Fabric Filter Bag Leak Detection Guidance | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 431.86(c)(1)(ii)(A) | HI BTS-2000 | 2001 | Method to Determine Efficiency of Commercial Space Heating Boilers | Hydronics Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.181(a)(5) | SAE J-1733 | 1994 | Sign Convention for Vehicle Crash Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(Q) | EPA Method 352.1 | 1971 | Nitrogen, Nitrate, Colorimetric, Brucine | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435 Appendix 6, Subpart A | EPA Method 1670 | 2015 | Reverse Phase Extraction (RPE) Method for Detection of Oil Contamination in Non-Aqueous Drilling Fluids (NAF) (GC/MS) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(b)(13) | ASTM D2700 | 2013 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel | ASTM International | |
Food and Drug Administration | 21 CFR 176.170(a)(5) | ASTM D1545 | 1981 | Standard Method of Test for Viscosity of Transparent Liquids by Bubble Time Method | ASTM International | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 478.24(b) | BATF Publication 5300.5 | 2008 | State Laws and Published Ordinances--Firearms | Bureau of Alcohol, Tobacco, Firearms and Explosives, U.S. Department of the Treasury | |
Energy Department | 10 CFR 440 Appendix A | ASTM C547 | 1977 | Insulation, Thermal (Mineral Fiber for Preformed Pipe) | ASTM International | |
Coast Guard | 45 CFR 162.920(c)(3)(iii) | CAQH Publication | 2011 | Phase II CORE 259: Eligibility and Benefits 270/271 AAA Error Code Reporting Rule, version 2.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Coast Guard | 46 CFR 160.077-21(c)(3) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 | ASTM D3286 | 1985 | Standard Test Method for Gross Calorific Value of Coal and Coke by the Isoperibol Bomb Calorimeter | ASTM International | |
Food Safety and Inspection Service | 45 CFR 162.920(d)(2) | NACHA Publication | 2011 | ACH Record Format Specifications (Operating Rule 78), Part 3.1, Subpart 3.1.8 Sequence of Records for CCD Entrie | National Automated Clearing House Association | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0020 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.307(d) | API 650 | 1998 | Welded Steel Tanks for Oil Storage | American Petroleum Institute |