This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.252(d)(1)(v) | API 1104 | 1968 | Standard for Welding Pipelines and Related Facilities | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(a) | ASTM D4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (1) | ASTM D4657 | 1998 | Standard Test Method for Polynuclear Aromatic Hydrocarbons in Water (Withdrawn 2005) | ASTM International | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Heptachlor) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1918.104(b)(1)(i) | ASTM F2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
Environmental Protection Agency | 40 CFR 60.104a(d)(6) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/AAMA 1102.7 | 1989 | Voluntary Specifications for Aluminum Storm Doors | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403(b) | CA State Regulations | 1972 | Division of Industrial Safety, General Safety Orders, Register 72, Number 6, Article 25, Section 3655—Overhead Guards for High-Lift Rider Trucks | State of California, Administrative Code | |
Food and Drug Administration | 21 CFR 136.110(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 182.450(f) | ABYC H-33 | 1989 | Diesel Fuel Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 63, Appendix A, Method 306B, Section 6.2 | ASTM D1331 | 1989 | Standard Test Method for Surface and Interfacial Tension of Solutions of Surface of Active Agents | ASTM International | |
Coast Guard | 27 CFR 21.63(a) | National Formulary | 1980 | Formula No. 36 | U.S. Pharmacopeial Convention | |
Federal Motor Carrier Safety Administration | 49 CFR 393.24(c) | FMVSS 108 | 1998 | Lamps, Reflective Devices, and Associated Equipment | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Housing and Urban Development Department | 24 CFR 100.201 Building entrance on an accessible route | ANSI A117.1 | 1986 | American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (17) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM D257 | 1991 | Standard Test Method for DC Resistance of Conductance of Insulating Materials | ASTM International | |
Food and Drug Administration | 21 CFR 172.841(b) | 1st Supplement, 5th Edition, Food Chemical Index | 2006 | Polydextrose | National Academy Press | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-61X | 1978 | Head Assembly, Complete, Revision T | General Motors Corporation | |
Energy Department | 10 CFR 430 Subpart B, App. R, 2.1 | IES LM-45 | 2000 | Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps | Illuminating Engineering Society of North America | |
Coast Guard | 46 CFR 162.161-6(b)(5) | UL 2166 | 2001 | Standard for Safety for Halocarbon Clean Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (30) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (3) Arsenic | APHA Method 3113 B | 1999 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 55.14(d)(17)(i) | 40 CFR part 52, subpart II | 1992 | State of North Carolina Air Pollution Control Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 10 | AOAC Official Methods | 1995 | Official Methods of Analysis of AOAC International, 16th Edition, Volume I, Chapter 17 | AOAC International | |
Environmental Protection Agency | 40 CFR 433.11 | 40 CFR Part 401 | 2015 | General Provisions | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.1101(h)(3) | ASTM D6751 | 2007 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Federal Communications Commission | 47 CFR 80.1101(c)(10) | IMO Resolution A.664(16) | 1989 | Performance Standards for Enhanced Group Call Equipment | International Maritime Organization | |
Housing and Urban Development Department | 24 CFR 3285.4(i)(1) | SEI/ASCE 32 | 2001 | Design and Construction of Frost-Protected Shallow Foundations | Structual Engineering Institute/American Society of Civil Engineers | |
Coast Guard | 46 CFR 111.75-20(a) | UL 1598A | 2000 | Standard for Supplemental Requirements for Luminaires for Installation on Marine Vessels, First Edition | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 60.632(f) | ASTM E169 | 1993 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(50) | API RP 2I | 2008 | In-Service Inspection of Mooring Hardware for Floating Structures | American Petroleum Institute | |
Coast Guard | 46 CFR 160.057-4(d)(9) | NIST Report 4792 | 1956 | Development of a Laboratory Test for Evaluation of the Effectiveness of Smoke Signals | National Institute of Standards and Technology, U.S. Department of Commerce | |
National Highway Traffic Safety Administration | 49 CFR 572.177(a)(2) | NHTSA Publication | 2011 | Procedures for Assembly, Disassembly and Inspection (PADI) of the Hybrid III 10-Year-Old Child Test Dummy (HIII-10C) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (1) | ASTM D2972B | 1993 | Arsenic by Gaseous Hydride Atomic Absorption | ASTM International | |
Research and Special Programs Administration | 21 CFR 173.165(d) | Food Chemicals Codex | 1981 | Candida Lipolytica | National Academy Press | |
Environmental Protection Agency | 40 CFR 90.509(a) | ASTM E29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Environmental Protection Agency | 40 CFR 94.2(b), Annex VI Technical Code | Annex VI of MARPOL 73/78 | 1997 | Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 587.15(d) | SAE J-211 | 1995 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(20) | ASTM D323 | 1968 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Coast Guard | 33 CFR 101.120(a)(2) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-2, Regulation 11 | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(14) | SAE J-592e | 1972 | Clearance, Side Marker, and Identification Lamps | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.107 | 29 CFR 1910.107(b)(5) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | U.S. Department of Labor | |
Environmental Protection Agency | 40 CFR 147.2650(a)(2) | PRUIC regulations | 1988 | Puerto Rico Public Policy Environmental Act (PRPPE), Title 12 Laws of Puerto Rico Annotated (LPRA) Chapters 121 and 131, 1977 edition, as amended 1988 edition, and Chapter 122 | Commonwealth of Puerto Rico | |
Occupational Safety and Health Administration | 14 CFR 150.13(c) | IEC 179 | 1973 | Precision Sound Level Meters | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASME RTP-1 | 2015 | Reinforced Thermoset Plastic Corrosion-Resistant Equipment | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14130(h) | SAE J-1194 | 1999 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 63.3151(b) | ASTM D5965 | 2002 | Standard Test Method for Specific Gravity of Coating Powders | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (45) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 7500-I D | 2000 | Radioactive Iodine-Distillation Method | American Public Health Association | |
Coast Guard | 46 CFR 56.01-2(e)(33) | ASTM A369/A 369M | 1992 | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service | ASTM International |