DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 75, Appendix A, Section 5.1.4(b) | EPA-600-R-97-121 | 1997 | EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards, as amended August 25, 1999 | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.890(k)(6)(i) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S4.1.1.4 | SAE J-903a | 1966 | Passenger Car Windshield Wiper Systems | Society of Automotive Engineers | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 516 | 1990 | Standard Specification for Vermiculite Loose Fill Thermal Insulation | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Methanol) | ASTM D 3695 | 1995 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 272, Subpart UU | VTHWMP | 2015 | State of Vermont Hazardous Waste Management Program (Reserved) | State of Vermont | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 3(a) | ASTM D 6350 | 2003 | Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy | ASTM International | |
Food and Drug Administration | 21 CFR 137.195 | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.178(a)(2) | ANSI B56.1 | 1969 | Safety Standard for Powered Industrial Trucks, Part II | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1724, Appendix A to Subpart E | USACE ER 1110-2-1155 | 1995 | U.S. Army Corps of Engineers Engineering and Design Dam Safety Program, Appendix E | Department of the Army, U.S. Army Corps of Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(i)(7) | AWS D10.9 | 1969 | Standard Qualification of Welding Procedures and Welders for Piping and Tubing | American Welding Society | |
Energy Department | 10 CFR 420.15(d)(4) | CABO Model Energy Code | 1993 | Model Energy Code | Council of American Building Officials | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table Note (6) | APHA Standard Methods, 18th Edition | 1992 | Standard Methods for the Examination of Water and Wastewater, 18th Edition | American Public Health Association | |
Federal Aviation Administration | 14 CFR 36.6(c)(1)(vi) | IEC 61094-3 | 1995 | Measurement Microphones--Part 3: Primary Method for Free-Field Calibration of Laboratory Standard Microphones by the Reciprocity Technique, edition 1.0 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 39.1005(b)(1) | ANSI B16.5 | 1981 | Steel Pipe Flanges and Flanged Fittings | American National Standards Institute | |
Coast Guard | 27 CFR 21.68(b)(1) 244 | National Formulary | 1980 | Formula No. 38-F | U.S. Pharmacopeial Convention | |
Energy Department | 10 CFR 430 Subpart B, App. S, 2a | ASME A112.18.1M | 1996 | Plumbing Fixture Fittings | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.135-15(e)(1)(iii) | ISO 1172:1996(E) | 1996 | Textile-glass-reinforced plastics—Prepregs, moulding compounds and laminates—Determination of the textile-glass and mineral-filler content—Calcination methods, Second Edition | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.276(f)(i) | CGA S-1.2 | 1980 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (99) | ASTM D 4657 | 1998 | Standard Test Method for Polynuclear Aromatic Hydrocarbons in Water (Withdrawn 2005) | ASTM International | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Standard Methods, 20th Edition | 1998 | Standard Methods for the Examination of Water and Wastewater. 20th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60 Subpart JJJJ, Table 2(1)(c)(iv) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Coast Guard | 46 CFR 160.026-6(d) Table 160.026-6(d)(2) | MIL-W-15117 | 1990 | Water, drinking, canned, emergency | U.S. Department of Defense | |
Coast Guard | 46 CFR 114.600(b) | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
National Highway Traffic Safety Administration | 40 CFR 60.632(f) | ASTM E 260 | 1996 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 260.11(c)(3)(xxiii) | EPA Method 9040C | 2004 | pH Electrometric Measurement (and in Basic Manual Update IIIB) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (63) | AOAC Method 993.14 | 1998 | Sodium-Total, mg/L | AOAC International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 6 | EPA-600-R-93-100 | 1993 | Methods for Determination of Inorganic Substances in Environmental Samples | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 55.14(e)(11)(i)(A) | 40 CFR part 52, subpart W | 2010 | Commonwealth of Massachusetts Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Federal Highway Administration | 23 CFR 625.4(d)(1)(vii)(A) | AASHTO BWC-7-I1-OL | 2018 | AASHTO BWC-7-I1-OL, 2018 Interim Revisions to AASHTO/AWS D1.5M/D1.5: 2015 Bridge Welding Code | American Association of State Highway and Transportation Officials | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM F 819 | 2010 | Standard Terminology Relating to Electrical Protective Equipment for Workers | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IE (1) | APHA Method 7110 B | 2000 | Gross alpha/beta - Evaporation | American Public Health Association | |
Food and Drug Administration | 21 CFR 178.3620(b)(1)(ii) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
National Archives and Records Administration | 36 CFR 1238.5(e)(4) | AIIM MS51 | 1991 | Micrographics--ISO Resolution Test Chart No. 2--Description and Use | Association for Information and Image Management | |
Coast Guard | 46 CFR 108.497(b) | ASTM F 1014 | 1992 | Standard Specification for Flashlights on Vessels | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(s)(1)(i)(A) | 35 I.A.C. 215, Subpart Y | 1989 | Administrative Code | State of Illinois | |
Coast Guard | 46 CFR 114.600(b) | UL 1102 | 1992 | Non integral Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(5) | Drawing No. SA-SID-M060 | 1994 | Title not specified | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.5.4.1 | SAE J-1703 | 1995 | Motor Vehicle Brake Fluid | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 57.5040(b)(4) | ANSI N13.8 | 1973 | Radiation Protection in Uranium Mines | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.114 | Drawing No. SA-SIDH3-M001 | 1997 | Complete Assembly SIDH3 | Reprographic Technologies | |
Health and Human Services Department | 45 CFR 162.1302(b)(2)(ii) | ASC X12N 278 | 2006 | Health Care Services Review--Request for Review and Response | Washington Publishing Company | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(82) | API MPMS | 2005 | Chapter 5—Metering, Section 8—Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology; First Edition | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (5) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/mass Spectrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(13)(i)(G) | AOAC Method 973.45 | 1998 | Oxygen (dissolved) in water. Titrimetric methods | AOAC International | |
Research and Special Programs Administration | 45 CFR 162.1203(a)(2) | CAQH Publication | 2011 | Phase I CORE 153: Eligibility and Benefits Connectivity Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 80.125(b) | AICPA Publication 059021 | 1991 | Codification of Statements on Auditing Standards, Statements on Standards for Attestation Engagements | American Institute of Certified Public Accountants, Inc. | |
Rural Utilities Service | 7 CFR 1755.902(e)(3) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 270.25(e)(3) | EPA-450-2-81-005 | 1981 | Air Pollution Training Institute Course 415: Control of Gaseous Emissions | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(6) | ASME SPPE-1 | 1994 | Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers |