This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 49 CFR 572.111(a) | Drawing No. 96-SIDH3-001 | 1996 | Head-Neck Bracket | Reprographic Technologies | |
Food and Drug Administration | 21 CFR 801.410(d)(2) | ASTM D 1415 | 1988 | Standard Test Method for Rubber Property--International Hardness | ASTM International | |
Minerals Management Service | 10 CFR 431.64(b)(2) | ARI 1200 | 2006 | Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets | Air Conditioning and Refrigeration Institute | |
Coast Guard | 46 CFR 110.10-1(f)(3) | IEEE C37.13 | 1990 | Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures | Institute of Electrical and Electronics Engineers | |
Research and Special Programs Administration | 49 CFR 179.220-18(a)(1) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Food and Drug Administration | 21 CFR 184.1191(b) | Food Chemicals Codex | 1981 | Calcium Carbonate | National Academy Press | |
Consumer Product Safety Commission | 16 CFR 1615.4(g)(2)(iii) Footnote 5 | AATCC 34 | 1969 | Fire Resistance of Textile Fabrics | American Association of Textile Chemists and Colorists | |
Federal Aviation Administration | 14 CFR 36 Appendix J J36.109(d)(1)(iii) | IEC 651 | 1979 | Sound Level Meters | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (100) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(b)(1) Table | EPA Method 502.2 | 1995 | Volatile Organic Compounds (Drinking Water) by GC/PID/ELCD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(a) | ASTM D 2234/D 2234M | 2010 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
Federal Trade Commission | 16 CFR 460.5(d)(1) | ASTM C 1363 | 1997 | Standard Test Method for the Thermal Performance of Building Assemblies by Means of a Hot Box Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (63) | APHA Method 3500-Na B | 1997 | Sodium, Flame-Emission Photometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 8 | WC Method B-1011 | 1987 | Waters Test Method for Determination of Nitrite/Nitrate in Water Using Single Column Ion Chromatography | Waters Corp. | |
Environmental Protection Agency | 40 CFR 60.41c Distillate oil | ASTM D 6751 | 2012 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 60.45(f)(5)(i) | ASTM D 1945 | 1996 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 63.626(d)(3)(vi)(F) | AOAC Method 962.02 | 1995 | Phosphorus (Total) in Fertilizers, Gravimetric Quinolinium Molybdophosphate Method | AOAC International | |
Federal Communications Commission | 47 CFR 68.317(c) | EIA-579 | 1991 | Acoustic-To-Digital and Digital-To-Acoustic Transmission Requirements for ISDN Terminals | Electronic Industries Association | |
Environmental Protection Agency | 40 CFR 60.633(h)(2) | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Rural Utilities Service | 7 CFR 1728.97(a)(17) | RUS Bulletin 50–72 (U–4) | 1979 | RUS Specification for Electrical Equipment Enclosures (5–35 kV) (10–79) | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 98.7(e)(9) | ASTM D 1836 | 2007 | Standard Specification for Commercial Hexanes | Society of Automotive Engineers | |
Coast Guard | 46 CFR 57.02-2(a)(1) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.01-2(d)(28) | ASME SA-675 | 1998 | Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 98.7(e)(25) | ASTM D 4891 | 2006 | Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion | ASTM International | |
Rural Utilities Service | 7 CFR 1755.405(d)(4) | ANSI T1.506 | 1990 | Specifications for Switched Exchange Access Network | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 88.104-94(k)(2) | CA State Publication | 1990 | California Regulatory Requirements Applicable to the Clean Fuel Fleet and California Pilot Programs | State of California | |
Rural Utilities Service | 7 CFR 1755.508(z) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 160.156-11(c)(2)(i)(B) | ASTM D 2584 | 2008 | Standard Test Method of Ignition Loss for Cured Reinforced Resins | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (6) | APHA Method 3114 C | 2009 | Arsenic and Selenium Digestion | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(13)(i)(I) | AOAC Method 973.47 | 1998 | Organic carbon in water. Infrared analyzer method | AOAC International | |
Environmental Protection Agency | 40 CFR 799.5085(j) Table 3, C4 | ASTM E 729 | 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians | ASTM International | |
Environmental Protection Agency | 40 CFR 98.244(b)(4)(viii) | EPA Method 8031 | 1994 | Acrylonitrile By Gas Chromatography, Revision 0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 260.11(c)(3) | EPA SW-846 | 2014 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Third Edition | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.136(b)(1) | Drawing No. 880105-528R | 1987 | Sliding knee assembly, right | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Diuron) | EPA Method 553 | 1992 | Determination of Benzidines and Nitrogen-Containing Pesticides in Water by Liquid-Liquid Extraction or Liquid-Solid Extraction and Reverse Phase High Performance Liquid Chromatography/Particle Beam/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 266, Appendix IX, 5.0 | EPA-450-2-78-027R | 1986 | Guidance on Air Quality Models (Revised) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1625(b)(3)(iii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 60.111(b) | ASTM D 396 | 1992 | Standard Specification for Fuel Oils | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iv)(B)(2) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels | American Society of Mechanical Engineers | |
National Archives and Records Administration | 36 CFR 1235.46(b)(2) | ANSI X3.180 | 1990 | Magnetic Tape and Cartridge for Information Interchange - 18-Track, Parallel, 1/2-inch (12.65mm), 37 871 CPI (1491 cpmm), Group-Coded Requirements for Recording | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.110(a)(2) | RT Publication | 1997 | SID/Hybrid III Part 572 Subpart M User's Manual | Reprographic Technologies | |
Coast Guard | 46 CFR 56.01-2(d)(15) | ASME B16.22 | 2001 | Wrought Copper and Copper Alloy Solder Joint Pressure Fittings | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63.14(g)(25) | ASTM D 2697 | 1986 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(66) | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Coast Guard | 46 CFR 160.002-4(b) | DWG No. F-49-6-5 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Child) | U.S. Coast Guard | |
Environmental Protection Agency | 40 CFR 63.2984(e) | ACGIH Publication | 1998 | Industrial Ventilation Manual: A Manual of Recommended Practice, 23rd Edition, Chapters 3 and 5 | American Conference of Governmental Industrial Hygienists | |
Mine Safety and Health Administration | 30 CFR 28.31(b) | MIL-F-15160D | 1997 | Fuses; Instrument; Power, and Telephone | U.S. Department of Defense | |
Coast Guard | 46 CFR 111.54-1(a)(1) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
Research and Special Programs Administration | 10 CFR 430.2, Definitions, Rated wattage (1)(ii) | ANSI C78.81 | 2005 | Electric Lamps - Double-Capped Fluorescent Lamps - Dimensional and Electrical Characteristics | American National Standards Institute | |
Federal Railroad Administration | 49 CFR 238 Appendix B (b) Critical Radiant Flux | ASTM E 648 | 2000 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source | ASTM International |