This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (40) | AOAC Method 993.30 | 1998 | Nitrite (as N), mg/L | AOAC International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F B | 1998 | Fluoride Distillation | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0018 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Coast Guard | 40 CFR 136.3(a) Table IB (35) | EPA Method 245.7 | 2005 | Mercury in Water by Cold Vapor Atomic Fluorescence Spectrometry, EPA-821-R-05-001, Revision 2.0 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.021-1(a)(1) | NIST Publication 440 | 1976 | Color: Universal Language and Dictionary of Names | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 59.213(b)(2) | ASTM E 380 | 1993 | Standard Practice for Use of the SI International System of Units | ASTM International | |
Coast Guard | 46 CFR 58.60-9 | API RP 14C | 1986 | Analysis, Design, Installation and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 46 CFR 160.135-11(c)(2)(ii) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Environmental Protection Agency | 40 CFR 1043.100(a)(1)(i) | IMO Publication | 2008 | Revised MARPOL Annex VI, Regulations for the Prevention of Pollution from Ships (2008 Annex VI) | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(E) | EPA Method 615 | 1993 | Chlorinated Herbicides by Liquid/Liquid Extraction, Derivitization and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | EPA Method 200.8 | 1994 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(e)(2) | ISO 15765-4:2005(E) | 2005 | Road Vehicles—Diagnostics on Controller Area Networks (CAN)—Part 4: Requirements for emissions-related systems | International Organization for Standardization | |
Food and Drug Administration | 21 CFR 177.1345(b)(2) | ASTM D 1525 | 1987 | Standard Test Method for Vicat Softening Temperature of Plastics | ASTM International | |
Environmental Protection Agency | 40 CFR 147.750(a)(3) | INUIC regulations | 1991 | Indiana Administrative Code, title 310, article 7, rules 1 through 3 (Cumm. Supp. 1991) | State of Indiana | |
Environmental Protection Agency | 40 CFR 63.404(a) | EPA SW-846 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-P-791B | 1971 | Putty | Federal Specifications Standards and Test Methods | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASHRAE GRP 158 | 1979 | Cooling and Heating Load Calculation Manual | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM D 2661 | 1991 | Acrylonitrile Butadiene Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings | ASTM International | |
Research and Special Programs Administration | 49 CFR 195.3(c) E7 | ASTM A 691 | 2002 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperature | ASTM International | |
Coast Guard | 46 CFR 160.077-19(d)(2) | ASTM D 751 | 1995 | Standard Test Methods for Coated Fabrics | ASTM International | |
Environmental Protection Agency | 40 CFR 600.113-12(f)(4)(ii)(A) SGE | ASTM D 1289 | 2012 | Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(vi) | ANSI Z87.1 | 2003 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | UL 174 | 1994 | Household Electric Storage Tank Water Heaters | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.36(h) | Drawing No. 78051-47 | 1987 | Upper leg assembly, right | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (70) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
Research and Special Programs Administration | 18 CFR 38.2(a)(12) | NAESB Publication | 2009 | Business Practices for Measurement and Verification of Wholesale Electricity Demand Response | North American Energy Standards Board Wholesale Electric Quadrant | |
Coast Guard | 33 CFR 154.500(d)(2) | ANSI B16.24 | 1979 | Bronze Pipe Flanges and Flanged Fittings, Classes 150 and 300 | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUU, Table 4, (3)(a)(i)(2)(b) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Food and Drug Administration | 21 CFR 184.1979c(b)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Public Health Service | 42 CFR 84.41(b) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(70) | ISO 10423:2003 | 2008 | (REF)Drilling and production equipment—Wellhead and Christmas tree equipment; Errata 1, Sept 2004, Errata 2, Apr 2005, Errata 3, Jun 2006, Errata 4, Aug 2007, Errata 5, May 2009; Add. 1, Feb 2008; Add. 2, 3, and 4, Dec 2008 | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (80) | APHA Method 6420 B | 2000 | Phenols by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.74(a)(1) Table Note 12 | HCC Method 10133 | 2000 | Determination of Turbidity by Laser Nephelometry, Revision 2.0 | Hach Chemical Company | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(11) | ASTM D 1890 | 1981 | Standard Test Method for Beta Particle Radioactivity of Water | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(i)(4) | ANSI Z88.2 | 1969 | Respiratory Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (20) Ortho-phosphate | ASTM D 4327 | 1997 | Inorganic Anions by Ion Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(189) | ASTM D 6784 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Coast Guard | 46 CFR 54.05-10(a) | ASTM A 20/A 20M | 1997 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(2)(i), Table I-2 Note | ASTM D 1049 | 2010 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 478 | 2009 | Standard Specification for In-Service Care of Insulating Line Hose and Covers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.152(c)(7) | NFPA 30 | 1969 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Interior Department | 43 CFR 11.71(l)(5)(iii)(A) | AFS Special Publication 13 | 1982 | Monetary Values of Freshwater Fish and Fish-Kill Counting Guidelines, Part II | American Fisheries Society | |
Environmental Protection Agency | 40 CFR 147.2400(a)(1) | WAUIC regulations | 1983 | Revised Code of Washington section 90.48.020, 90.48.080, 90.48.160, and 90.48.162 (Bureau of National Affairs, 1983 Laws) | State of Washington | |
Rural Utilities Service | 7 CFR 1755.890(i)(5)(v) | ASTM B 694 | 1986 | Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 175.33(a)(1)(ii) | ICAO Publication | 2005 | Technical Instructions for the Safe Transport of Dangerous Goods by Air | International Civil Aviation Organization | |
National Highway Traffic Safety Administration | 49 CFR 571.106 S12.7(b) | ASTM G 154 | 2000 | Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.5 | 2003 | Pipe Flanges and Flanged Fittings NPS 1/2 through NPS 24 Metric/Inch Standard 2003 DHS/USCG | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (60) | ASTM D 3859B | 2008 | Standard Test Methods for Selenium in Water, Graphite Furnace AAS | ASTM International | |
National Highway Traffic Safety Administration | 9 CFR 381.409(c)(6) | USDA Handbook 74 | 1973 | Energy Values of Foods: Basis and Derivation | U.S. Department of Agriculture | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(1)(i) | EPA-600-4-79-020 | 1983 | Method 204.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency |