This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-13 | 2000 | Guidelines for Periodic Visual Inspection and Requalification of Acetylene Cylinders | Compressed Gas Association | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.4.1 | 1993 | Water Heater Relief Valve Drain Tubes | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (8) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xii) | ASTM D 1067 | 2006 | Standard Test Method for Acidity or Alkalinity of Water | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(h)(2) | ASTM E 729 | 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1808-01(f)(12)(iii) | SAE J-2534 | 2002 | Recommended Practice for Pass-Thru Vehicle Programming | Society of Automotive Engineers | |
Energy Department | 10 CFR 434.701.1 RS-2 | ASHRAE 55 | 1992 | Thermal Environmental Conditions for Human Occupancy including addenda 55a-95 (RS-2) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | AWWA C 207 | 1955 | Steel Pipe Flanges | American Water Works Association | |
Coast Guard | 46 CFR 175.600(b) Table | ASTM B 209 | 1996 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.142(a) | Drawing No. ATD 6259 | 1987 | Adapter plate | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Isopropalin) | EPA Method 627 | 1997 | The Determination of Dinitroaniline Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272.1301(a)(1)(ii) | MOHWMP | 1990 | Missouri Regulatory Requirements Applicable to the Hazardous Waste Management Program | State of Missouri | |
Environmental Protection Agency | 40 CFR 75.6(a)(15) | ASTM D 1946 | 2006 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 125.180(b) | IEEE 45 | 1977 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Food and Drug Administration | 21 CFR 177.1990(c)(2) | ASTM D 3536 | 1976 | Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by Liquid Exclusion Chromatography (Gel Permeation Chromatography--GPC) | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(95) | ASTM D 2382 | 1976 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Food and Drug Administration | 21 CFR 175.300(b)(3)(xxxiii) | ASTM D 2503 | 1982 | Standard Method of Test for Molecular Weight of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | APA H815E | 1989 | Design and Fabrication of All-Plywood Beams, Suppl. 5 | APA--The Engineered Wood Association | |
Coast Guard | 46 CFR 164.013-2(b) | UL 1191 | 1995 | Standards for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Federal Communications Commission | 47 CFR 15.38(b)(11) | IEC CISPR Publication 22 | 1997 | Information Technology Equipment--Radio Disturbance Characteristics--Limits and Methods of Measurement | International Electrotechnical Commission | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM E 29 | 1990 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Federal Aviation Administration | 15 CFR 230.2 | NIST SP 260 | 2012 | Catalog of NIST Standard Reference Materials and Supplement | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 160.060-3(c) | Federal Standard 191 | 1978 | Textile Test Method 5660 | U.S. Coast Guard | |
Mine Safety and Health Administration | 30 CFR 56.14131(d) | SAE J-386 | 1993 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.10(a) | Drawing No. SA 150 M080 | 1987 | Right Leg Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 111.75-20(a) | UL 1598A | 2000 | Standard for Supplemental Requirements for Luminaires for Installation on Marine Vessels, First Edition | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(a) | ANSI B30.5 | 1968 | Safety Code for Crawler, Locomotive and Truck Cranes | American National Standards Institute | |
Federal Railroad Administration | 49 CFR 232.103(l) | AAR S-469-47 | 1999 | Performance Specification of Freight Brakes | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (15) | 3M Test Method 0222 | 1994 | Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk | 3M Corporation | |
Environmental Protection Agency | 40 CFR 141.852(c)(1)(ii)(C) | APHA Method 9222 | 2005 | Membrane Filter Technique for Members of the Coliform Group, B, Standard Total Coliform Membrane Filter Procedure | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(a) | ASTM D 6323 | 2003 | Standard Guide for Laboratory Subsampling of Media Related to Waste Management ActivitiessubpartDDDDD-app6.xml | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-4, Method 7D, Section 7.1.1 | ASTM D 1193 | 1977 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(33) | ASTM D 5191 | 2013 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | SMACCNA Publication | 1978 | Energy Recovery Equipment and Systems, Air-to-Air | Sheet Metal and Air Conditioning Contractors' National Association | |
Housing and Urban Development Department | 24 CFR 200.946(a)(2) | ASTM D 3273 | 1991 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (11) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Chlordane) | EPA Method 508.1 | 1995 | Determination of Chlorinated Pesticides, Herbicides, and Organohalides by Liquid-Solid Extraction and Electron Capture Gas Chromatography | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.63(f)(4) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Consumer Product Safety Commission | 16 CFR 1450.3 (a) | ANSI/APSP-16 | 2011 | Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, and Hot Tubs | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200.925b(c)(5) | ASCE 7 | 1988 | Minimum Design Loads for Buildings and Other Structures | American Society of Civil Engineers | |
Environmental Protection Agency | 40 CFR 60.17(g)(93) | ASTM D 2369 | 1993 | Standard Test Method for Volatile Content of Coatings | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(v)(1) | TFI M-1 | 1961 | Standards for the Storage and Handling of Agricultural Anhydrous Ammonia | Fertilizer Institute | |
Public Health Service | 42 CFR 37.42(i)(5)(i)(A) | DICOM Standard PS 3.3-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 3: Information Object Definitions | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 111.60-6(a) | UL 1581 | 2003 | Reference Standard for Electrical Wires, Cables, and Flexible Cords | Underwriters Laboratories, Inc. | |
Research and Special Programs Administration | 49 CFR 195.205(b)(3) | API 2510 | 2001 | Design and Construction of LPG Installations | American Petroleum Institute | |
Energy Department | 10 CFR 431.96 (b)(2) Table 1 | AHRI 210/240-2008 | 2008 | Standard for Unitary Air-Conditioning & Air-Source Heat Pump Equipment | Air Conditioning, Heating, and Refrigeration Institute | |
Energy Department | 10 CFR 430.3(i)(1) | CIE 13.3 | 1995 | Technical Report: Method of Measuring and Specifying Colour Rendering Properties of Light Sources | International Commission on Illumination | |
Occupational Safety and Health Administration | 29 CFR 1910.103(b) | ANSI B31.1 Addendum | 1969 | Code for Pressure Piping Addendum | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 173.32(b)(4) | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
Housing and Urban Development Department | 24 CFR 3280.306(b)(2)(v) | ASTM D 3953 | 1991 | Standard Specification for Strapping, Flat Steel and Seals | ASTM International |