| National Highway Traffic Safety Administration |
|
49 CFR 571.108 S5.2 (14) |
Annual Book of Standards |
1985 |
Annual Book of ASTM Standards: Test Methods for Rating Motor, Diesel, Aviation Fuels, Section I, parts A2.3.2, A2.3.3, and A2.7 in Annex 2
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.108 S5.2 (15) |
ASTM D362 |
1984 |
Standard Specification for Industrial Grade Toluene
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.108 S5.2 (16) |
ASTM C150 |
1977 |
Standard Specification for Portland Cement
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.108 S5.2 (17) |
ASTM C150 |
1956 |
Standard Specifications for Portland Cement
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.108 S5.2 (18) |
IES LM-45 |
1980 |
IES Approved Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps
|
Illuminating Engineering Society of North America |
| National Highway Traffic Safety Administration |
|
49 CFR 571.108 S8.1.13 |
FedSpec L-S-300 |
1965 |
Sheeting and Tape, Reflective: Nonexposed Lens, Adhesive Backing
|
Federal Specifications Standards and Test Methods |
| National Highway Traffic Safety Administration |
|
49 CFR 571.108 S14.2.5.7.3 |
CIE 1931 |
1931 |
Chromaticity Diagram
|
International Commission on Illumination |
| National Highway Traffic Safety Administration |
|
49 CFR 572.15(b) |
Drawing No. SA 103C 020 |
1976 |
Neck Assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.15(b) |
Drawing No. SA 103C 042 |
1976 |
Upper Arm Assembly Right
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.15(b) |
Drawing No. SA 103C 010 |
1976 |
Head Assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.15(b) |
Drawing No. SA 103C 030 |
1976 |
Torso Assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.15(b) |
Drawing No. SA 103C 041 |
1976 |
Upper Arm Assembly Left
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.15(b) |
Drawing No. SA 103C 051 |
1976 |
Forearm Hand Assembly Left
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.15(b) |
Drawing No. SA 103C 052 |
1976 |
Forearm Hand Assembly Right
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.15(b) |
Drawing No. SA 103C 061 |
1976 |
Upper Leg Assembly Left
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Architectural and Transportation Barriers Compliance Board |
|
36 CFR 1192 |
ISO 10865-1:2012 |
2012 |
Americans With Disabilities Act (ADA) Accessibility Guidelines for Transportation Vehicles
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 60 Subpart DDDD, Table 2, Mercury |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart DDDD, Table 6, Mercury |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart DDDD, Table 7, Mercury |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart DDDD, Table 2, Mercury |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart DDDD, Table 6, Mercury |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart DDDD, Table 7, Mercury |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart DDDD, Table 9, Mercury |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart DDDD, Table 9, Mercury |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.55c |
AHA Catalog No. 057007 |
1993 |
An Ounce of Prevention: Waste Reduction Strategies for Health Care Facilities Site
|
American Hospital Association Service, Inc. |
| Environmental Protection Agency |
|
40 CFR 60.56c(b)(4) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.56c(b)(13) |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.56c(b)(13) |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.63(f)(2) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.63(f)(4) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.593(b)(2) |
ASTM E260 |
1973 |
Standard Practice for Packed Column Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.593(b)(2) |
ASTM E260 |
1991 |
Standard Practice for Packed Column Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.593(b)(2) |
ASTM E260 |
1996 |
Standard Practice for Packed Column Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.593(b)(2) |
ASTM E168 |
1967 |
Standard Practices for General Techniques of Infrared Quantitative Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.593(b)(2) |
ASTM E168 |
1977 |
Standard Practices for General Techniques of Infrared Quantitative Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.593(b)(2) |
ASTM E169 |
1977 |
Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.593(b)(2) |
ASTM E168 |
1992 |
Standard Practices for General Techniques of Infrared Quantitative Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.593(b)(2) |
ASTM E169 |
1963 |
Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.593(b)(2) |
ASTM E169 |
1993 |
Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.593(d) |
ASTM D86 |
1978 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.593(d) |
ASTM D86 |
1982 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.593(d) |
ASTM D86 |
1990 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.593(d) |
ASTM D86 |
1995 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.593(d) |
ASTM D86 |
1996 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.73a(b)(3) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.73a(c)(2)(ii) |
ASTM E1584 |
2011 |
Standard Test Method for Assay of Nitric Acid 2011 EPA/AP
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.4211(f)(2)(ii) |
NAERC EOP-002-3 |
2012 |
Capacity and Energy Emergencies
|
North American Electric Reliability Corporation |
| Environmental Protection Agency |
|
40 CFR 60 Subpart IIII, Table 7(1)(a)(iii) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart IIII, Table 7(1)(a)(iv) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart IIII, Table 7(1)(b)(iii) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |