This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 56.01-2(e)(2) | ASTM A 47 | 1995 | Standard Specification for Ferritic Malleable Iron Castings | ASTM International | |
Environmental Protection Agency | 40 CFR 80.165(b) | ASTM D 5500 | 1998 | Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Fuel for Intake Valve Deposit Formation | ASTM International | |
Coast Guard | 46 CFR 169.703(c)(5)(iv) | ABYC A-1 | 1993 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 183.340(i) | UL 486A | 1992 | Wire Connectors and Soldering Lugs For Use With Copper Conductors | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (39) | EPA Method 300.0 | 1993 | Ion chromatography - anions, Revision 2.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | APHA Method 4500-CN E | 1995 | Cyanide by Colorimetric Determination | American Public Health Association | |
Environmental Protection Agency | 40 CFR 59.401 Quick dry enamel (2) | ASTM D 1640 | 1989 | Standard Test Method for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.114 | Drawing No. SA-SIDH3-M001 | 1997 | Complete Assembly SIDH3 | Reprographic Technologies | |
National Highway Traffic Safety Administration | 30 CFR 56.13015(a) | NB-23 | 1979 | National Board Inspection Code | National Board of Boiler and Pressure Vessel Inspectors | |
Energy Department | 10 CFR 430 Subpart B, App. N, 10.7.1 | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.135-7(b)(3)(ii) | ASTM A 313/A 313M | 2008 | Standard Specification for Stainless Steel Spring Wire | ASTM International | |
Environmental Protection Agency | 40 CFR 1036.530(b)(1) | ASTM D 5291 | 2010 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 14 | Quanti-Tray®/2000 Method | 2002 | Quanti-Tray®/2000 Method | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 435.41(mm) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(b)(9) | ASTM D 1945 | 2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B 42 | 1996 | Standard Specification for Seamless Copper Pipe, Standard Sizes | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.272 Appendix B | ANSI/NFPA 69 | 2014 | Explosion prevention systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 147.650(a)(8) | IDUIC regulations | 1977 | Idaho Trade Secrets Act, Title 48, Chapter 8, Idaho Code, sections 48-801 through 48-807 (Bobbs-Merrill 1977 and Supp. 1984) | State of Idaho | |
Environmental Protection Agency | 40 CFR 63.10005(i)(4)(ii) | ASTM D 4006 | 2011 | Standard Test Method for Water in Crude Oil by Distillation, including Annex A1 and Appendix X1 | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(6)(iv) | ASTM D 3928 | 1989 | Standard Test Method for Evaluation of Gloss and Sheen Uniformity | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(k)(12)(i) | 29 CFR 1910.23 | 2014 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards | Occupational Safety and Health Administration, U.S. Department of Labor | |
Housing and Urban Development Department | 24 CFR 200.940(a)(2) | ASTM E 774 | 1992 | Standard Specifications for Sealed Insulating Glass Units | ASTM International | |
Environmental Protection Agency | 40 CFR 60.335(b)(10)(i) | ASTM D 1552 | 2001 | Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) | ASTM International | |
Research and Special Programs Administration | 49 CFR 195.3(c) B16 | API 2510 | 2001 | Design and Construction of LPG Installations | American Petroleum Institute | |
Rural Utilities Service | 7 CFR 1755.390(k)(6)(i) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.111b Maximum true vapor pressure (3) | ASTM D 2879 | 1996 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 591 | 1985 | Rigid Preformed Polyurethane Insulation Board | ASTM International | |
Coast Guard | 46 CFR 114.600(b) | ANSI B31.1 | 1986 | Code for Pressure Piping, Power Piping | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.35(c)(2)(i) | Drawing No. 86-5001-001 | 1996 | Leg Assembly, Complete | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (68) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 431.134(b) | ARI 810 | 2003 | Performance Rating of Automatic Commercial Ice-Makers 2003 | Air Conditioning and Refrigeration Institute | |
Research and Special Programs Administration | 49 CFR 173.63(f)(2) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
Food and Drug Administration | 21 CFR 189.110(c) | AOAC Journal | 1973 | Flavors and Nonalcoholic Beverages, Vol. 56, No. 5, pages 1281-1283 | AOAC International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 193.2013(a)(1) | AGA Publication | 2001 | Purging Principles and Practices | American Gas Association | |
Labor Department | 41 CFR 50-204.75 | 49 CFR 171 | 2014 | Hazardous Materials Regulations, General Information, Regulations, and Definitions | U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (76) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(1) | EPA-600-R-94-173 | 1994 | Technical Notes on Drinking Water Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.3.2 | APHA Method 602 | 2015 | Tentative Method of the Analysis for Gross Beta Radioactivity Content of the Atmosphere | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | APHA Method 4500-NO3 F | 2000 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(82) | ASTM D 2015 | 1996 | Standard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter | ASTM International | |
Coast Guard | 46 CFR 131.875(f) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Food and Drug Administration | 21 CFR 163.5(a) | AOAC Official Methods | 1975 | Official Methods of Analysis | AOAC International | |
Labor Department | 41 CFR 50-204.66(a) | CGA G-1 | 1966 | Acetylene | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 147.2550(a)(1) | WYUIC regulations | 1977 | Wyoming Environmental Quality Act, Wyoming Statutes sections 35-11-101 through 35-11-115, and 35-11-301 through 35-11-305 (1977 Republished Edition and 1989 Cumm. Supp.) | State of Wyoming | |
Environmental Protection Agency | 40 CFR 60, Appendix A-4, Method 7C, Section 7.1.1 | ASTM D 1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 9095B | 2004 | Paint Filter Liquids Test | U.S. Environmental Protection Agency | |
Federal Railroad Administration | 49 CFR 238 Appendix B (b) Specific Extinction Area | ASTM E 1354 | 1999 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter | ASTM International | |
Coast Guard | 46 CFR 56.50-15(b) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (52) | APHA Method 3500-K B | 1997 | Potassium, Flame Photometric Method | American Public Health Association | |
Energy Department | 10 CFR 430 Subpart B, App. O, 2.4.2 | ANSI Z11.182 | 1965 | Standard Method of Test for Smoke Density in the Flue Gases from Distillate Fuels | American National Standards Institute |