Occupational Safety and Health Administration |
|
29 CFR 1910.137(b) Note to paragraph (b) |
ASTM F712 |
2006 |
Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers
|
ASTM International |
National Highway Traffic Safety Administration |
|
49 CFR 572.185(c)(1)(i) |
Drawing No. 175-8000 |
2009 |
Neoprene Body Suit
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IH Footnote 16 |
Colilert® Method |
2013 |
Colilert Test Kit
|
IDEXX Laboratories |
National Highway Traffic Safety Administration |
|
49 CFR 571.122 S6.1.1.3 |
ASTM E1136 |
2003 |
Standard Specification for Radial Standard Reference Test Tire
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 141.24(e)(1) Table (Toxaphene) |
EPA Method 525.2 |
1995 |
Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 60.107a(d)(7)(iii) |
ASTM D1945 |
2010 |
Standard Test Method for Analysis of Natural Gas by Gas Chromatography
|
ASTM International |
Food and Drug Administration |
|
21 CFR 131.160(c)(1) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
Coast Guard |
|
46 CFR 160.151-21(j) |
IMO Resolution MSC.293(87) |
2010 |
Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code
|
International Maritime Organization |
Coast Guard |
|
46 CFR 184.240(g) |
ABYC A-1 |
1993 |
Marine Liquefied Petroleum Gas Systems
|
American Boat and Yacht Council |
National Highway Traffic Safety Administration |
|
49 CFR 572.20 |
Drawing No. SA 103C 042 |
1976 |
Upper Arm Assembly, Right
|
Reprographic Technologies |
Health and Human Services Department |
|
45 CFR 162.1302(b)(1) |
NCPDP Publication |
1999 |
Telecommunication Standard Implementation Guide, Version 5.1
|
National Council for Prescription Drug Programs |
Coast Guard |
|
46 CFR 160.170-21(a)(1) |
IMO MSC.1/Circular 1205 |
2006 |
Guidelines for Developing Operation and Maintenance Manuals for Lifeboat Systems
|
International Maritime Organization |
Coast Guard |
|
27 CFR 21.64(a) |
The United States Pharmacopoeia |
1980 |
Formula No. 37
|
U.S. Pharmacopeial Convention |
Environmental Protection Agency |
|
40 CFR 60.17(g)(199) |
ASTM E260 |
1996 |
Standard Practice for Packed Column Gas Chromatography
|
ASTM International |
National Highway Traffic Safety Administration |
|
49 CFR 572.20 |
Drawing No. SA 103C 002 |
1987 |
Title not specified
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (63) |
EPA Method 525.2 |
1995 |
Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0
|
U.S. Environmental Protection Agency |
Research and Special Programs Administration |
|
49 CFR 178.57(d)(5) |
CGA C-3 |
1994 |
Standard for Welding and Brazing on Thinned Walled Containers
|
Compressed Gas Association |
Environmental Protection Agency |
|
40 CFR 58 Appendix E, 12.0(33) |
EPA-450-4-87-013 |
1987 |
On-Site Meteorological Program Guidance for Regulatory Modeling Applications
|
U.S. Environmental Protection Agency |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 178.338-2(a) |
ASTM A1008/A 1008M |
2003 |
Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1926.200(i) |
ANSI Z535.2 |
2011 |
Environmental and Facility Safety Signs
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (74) |
EPA Method 610 (GC) |
1982 |
Polynuclear Hydrocarbons by GC/FID
|
U.S. Environmental Protection Agency |
Coast Guard |
|
45 CFR 162.1203(a)(5) |
CAQH Publication |
2011 |
Phase I CORE 156: Eligibility and Benefits Real Time Response Rule, version 1.1.0
|
Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) |
Rural Utilities Service |
|
7 CFR 1755.910(g)(2)(v) |
ASTM D4568 |
1986 |
Standard Test Method for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Cable Materials
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 435 Appendix 8, Subpart A |
EPA Method 1646 |
2015 |
Procedure for Mixing Base Fluids With Sediments
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 86.1(b)(16) |
ASTM D4052 |
2011 |
Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.104(b)(4)(ii) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VIII, Paragraph UG-84
|
American Society of Mechanical Engineers |
Coast Guard |
|
46 CFR 160.010-3(a)(2) |
IMO LSA Code |
2010 |
Life-Saving Appliances, including LSA Code
|
International Maritime Organization |
Rural Utilities Service |
|
7 CFR 1755.390(k)(8)(iii)(B) |
ICEA S-84-608 |
1988 |
Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements
|
Insulated Cable Engineers Association |
Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart L Appendix B 1910.163 |
NFPA No. 26 |
1988 |
Supervision of Valves
|
National Fire Protection Association |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 533.3R |
1970 |
Fabrication, Handling and Erection of Precast Concrete Wall Panels
|
American Concrete Institute |
Housing and Urban Development Department |
|
24 CFR 3280.604(b)(2) |
FedSpec TT-P-1536A |
1975 |
Plumbing Fixture Setting Compound
|
Federal Specifications Standards and Test Methods |
Housing and Urban Development Department |
|
24 CFR 3280.604(b)(2) |
ASME A112.18.3M |
1996 |
Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings
|
American Society of Mechanical Engineers |
National Highway Traffic Safety Administration |
|
29 CFR 1918.104(b)(1)(ii) |
ANSI Z41 |
1999 |
Protective Footwear
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 76.4(d)(1) |
ISO 9931 |
1991 |
Coal--Sampling of Pulverized Coal Conveyed by Gases in Direct Fired Coal Systems
|
International Organization for Standardization |
Environmental Protection Agency |
|
40 CFR 260.11(c)(3)(xxii) |
EPA Method 9012B |
2004 |
Total and Amenable Cyanide (Automated Colorimetric, with Off-Line Distillation) (and in Basic Manual Update IIIB)
|
U.S. Environmental Protection Agency |
Energy Department |
|
10 CFR 430.3(c)(14) |
ANSI C82.3 |
2002 |
Reference Ballasts for Fluorescent Lamps
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (51) |
APHA Method 3111 B |
1999 |
Metals by Flame Atomic Absorption
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (19) Nitrite |
WC Method B-1011 |
1987 |
Waters Test Method for Determination of Nitrite/Nitrate in Water Using Single Column Ion Chromatography
|
Waters Corp. |
Environmental Protection Agency |
|
40 CFR 147.550(a)(2) |
GAUIC regulations |
1988 |
Ground Water Use Act of 1972, O.C.G.A. §§ 12-5-90 through 12-5-107
|
State of Georgia |
Environmental Protection Agency |
|
40 CFR 63, Subpart UUUUU, Table 2, (5)(a) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 91.6(b)(1) Table |
ASTM D3606 |
1992 |
Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 1065.1010(b)(8) |
ASTM D910 |
2013 |
Standard Specification for Aviation Gasolines
|
ASTM International |
National Archives and Records Administration |
|
36 CFR 1234.3(g)(2) |
UL 827 |
1999 |
Central-Station Alarm Services
|
Underwriters Laboratories, Inc. |
Environmental Protection Agency |
|
40 CFR 1065.710 Table 1 |
ASTM D6550 |
2010 |
Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IA Footnote 26 |
EPA-821-R-02-012 |
2002 |
Methods for Measuring the Acute Toxicity of Effluents and Receiving Waters to Freshwater and Marine Organisms, Fifth Edition
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 52, Subpart XX |
WVSIP |
1979 |
State of West Virginia Implementation Plan with Regulatory and Nonregulatory Revisions
|
State of West Virginia |
Environmental Protection Agency |
|
40 CFR 141.40(a)(3) Table 1 (perfluoroheptanoic acid (PFHpA)) |
EPA Method 537 |
2009 |
Determination of Selected Perfluorinated Alkyl Acids in Drinking Water by Solid Phase Extraction and Liquid Chromatography/Tandem Mass Spedctrometry (LC/MS/MS)
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 114, 3.1.1 |
ASTM D3972 |
1997 |
Standard Test Method for Isotopic Uranium in Water by Radiochemistry
|
ASTM International |
Food and Drug Administration |
|
21 CFR 165.110(b)(4)(iii)(I)(2)(i) |
EPA-600-R-93-100 |
1993 |
Method 300.0--Methods for the Determination of Inorganic Substances in Environmental Samples
|
U.S. Environmental Protection Agency |
Federal Motor Carrier Safety Administration |
|
49 CFR 393.86(a)(1) |
FMVSS 223 |
1998 |
Rear Impact Guards
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |