This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 40 CFR 60.335(a)(4) | EPA Method 1 | 2014 | Sample and Velocity Traverses for Stationary Sources | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 178.3770(a)(3) | ASTM D 1387 | 1978 | Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
Coast Guard | 46 CFR 111.54-1(c)(2) | IEC 60947-2 | 2003 | Low-Voltage Switchgear and Controlgear Part 2: Circuit-Breakers, Third Edition | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.5.1 | API MPMS | 2005 | Chapter 22, Section 2 | American Petroleum Institute | |
Coast Guard | 46 CFR 171.080(g) | IMO Resolution MSC.216(82) | 2006 | Amendments to the International Convention for the Safety of Life At Sea, 1974, As Amended (IMO Res. MSC.216(82) | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (34) | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption, Revision 2.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (8) Calcium | ASTM D 511B | 1993 | Standard Test Methods for Calcium and Magnesium In Water, Atomic Absorption Spectrophotometric | ASTM International | |
Coast Guard | 46 CFR 160.133-5(c)(2) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.181 Table A | Drawing No. 175-7000-2 | 2009 | Leg Assembly, Right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(D) | EPA Method 160.4 | 1971 | Residue, Volatile (Gravimetric, Ignition at 550 degrees C) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 6 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.1468(b)(6) | ASTM E 711 | 1987 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter | ASTM International | |
Environmental Protection Agency | 40 CFR 147.1700(a)(5) | NCUIC regulations | 1989 | North Carolina Drinking Water Act, N.C. GEN. STAT. §§ 130A-311 through 130A-332 | State of North Carolina | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | IAPMO PS 199 | 2015 | Title Unkown | International Association of Plumbing and Mechanical Officials | |
Federal Aviation Administration | 14 CFR 34.1 Characteristic level | ICAO Annex 16 | 2008 | Environmental Protection, Appendix 6 | International Civil Aviation Organization | |
Research and Special Programs Administration | 42 CFR 460.72(b)(5)(iv) | NFPA 101 | 2000 | Life Safety Code, as amended by NFPA Temporary Interim Amendment 00-1(101) | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(99) | ASTM D 2504 | 1993 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1807-01(f) | SAE J-1877 | 1994 | Recommended Practice for Bar-Coded Vehicle Identification Number Label | Society of Automotive Engineers | |
Health and Human Services Department | 45 CFR 162.1602(a) | ASC X12N 835 | 2000 | Health Care Claim Payment/Advice | Washington Publishing Company | |
Food and Drug Administration | 21 CFR 172.809(b) | TCI Publication | 1996 | Analytical Methods for Specification Tests for Curdlan | Takeda Chemical Industries, Ltd. | |
Health and Human Services Department | 45 CFR 162.1102(a)(1) | NCPDP Publication | 2000 | Batch Standard Batch Implementation Guide, Version 1, Release 1 | National Council for Prescription Drug Programs | |
Research and Special Programs Administration | 49 CFR 172.519(f) | ICAO Publication | 1993 | Technical Instructions for the Safe Transport of Dangerous Goods by Air | International Civil Aviation Organization | |
Coast Guard | 46 CFR 96.07-5(b)(1) | ABS Publication | 2013 | All ABS Standards | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 571.208 S13.1 | SAE J-211/1 | 1980 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.902(l)(7)(i) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Coast Guard | 46 CFR 110.10-1(f)(6) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations On Shipboard | Institute of Electrical and Electronics Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.15(b) | Drawing No. SA 103C 061 | 1976 | Upper Leg Assembly Left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (53) | APHA Method 6630 B | 2000 | Organochlorine Pesticides by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Energy Department | 10 CFR 434.403.2.4 | ASHRAE 62 | 1989 | Ventilation for Acceptable Indoor Air Quality (RS-41) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(6)(ii)(D)(1) | ASME Code Case N-729-1 | 2006 | Alternative Examination Requirements for PWR Reactor Vessel Upper Heads with Nozzles Having Pressure-Retaining Partial-Penetration Welds, Section XI, Division 1 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(6) | ANSI B30.5, 5-1.3.3 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Telescoping Boom | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (58) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (bromochloromethane (Halon 1011)) | EPA Method 524.3 | 2009 | Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart MMMM, Table 3, Sulfur Dioxide | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.163 | ANSI/NFPA 11B | 2014 | Synthetic Foam and Combined Agent Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (16) Mercury | APHA Method 3112 B | 1995 | Mercury by Cold Vapor Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7091 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(21) | AWS D1.4-98 | 1998 | Structural Welding Code—Reinforcing Steel | American Welding Society | |
Coast Guard | 46 CFR 63.15-1(b) | ASME CSD-1 | 2004 | Controls and Safety Devices for Automatically Fired Boilers | American Society of Mechanical Engineers | |
Minerals Management Service | 30 CFR 250.1203(b)(2)(iii) | AGA Report No. 9 | 2007 | Measurement of Gas by Multipath Ultrasonic Meters; Second Edition | American Gas Association | |
Environmental Protection Agency | 40 CFR 52.741(v)(1)(i) | 35 I.A.C. 215, Subpart B | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.870(a)(6) | ASTM D 1248 | 1989 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(viii) | APHA Method 2120 | 2001 | Color | American Public Health Association | |
Food and Drug Administration | 21 CFR 573.640(b)(4)(i) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.178(f)(1) | NFPA 30 | 1969 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.6.2.1.1(a) | ASTM D 362 | 1984 | Standard Specification for Industrial Grade Toluene | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.101(a) | Drawing No. 92041-009 | 1992 | Six-Axis Load Cell Simulator Assembly | Reprographic Technologies | |
Coast Guard | 46 CFR 56.01-2(k)(15) | MSS SP-83 | 1995 | Class 3000 Steel Pipe Unions, Socket Welding and Threaded | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 25.45-2(b)(2) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 0040 | 1996 | Sampling of Principal Organic Hazardous Constituents from Combustion Sources Using Tedlar® Bags | U.S. Environmental Protection Agency |