| Federal Aviation Administration |
|
14 CFR 36.6(c)(1)(ii) |
IEC 225 |
1966 |
Octave, Half-Octave, Third Octave Band Filters Intended for the Analysis of Sounds and Vibrations
Archived
|
International Electrotechnical Commission |
| Federal Aviation Administration |
|
14 CFR 36.6(c)(1)(iii) |
IEC 651 |
1979 |
Sound Level Meters
Archived
|
International Electrotechnical Commission |
| Federal Aviation Administration |
|
14 CFR 36.6(c)(1)(iv) |
IEC 561 |
1976 |
Electro-acoustical Measuring Equipment for Aircraft Noise Certification
Archived
|
International Electrotechnical Commission |
| Federal Aviation Administration |
|
14 CFR 36.6(c)(1)(v) |
IEC 804 |
1985 |
Integrating-averaging Sound Level Meters
Archived
|
International Electrotechnical Commission |
| Federal Aviation Administration |
|
14 CFR 36.6(c)(2)(i) |
SAE ARP 866A |
1975 |
Standard Values at Atmospheric Absorption as a Function of Temperature and Humidity for Use in Evaluating Aircraft Flyover Noise
Archived
|
Society of Automotive Engineers |
| National Institute of Standards and Technology |
|
15 CFR 200.115(a) |
NIST SP 250 |
2012 |
National Institute of Standards and Technology
Archived
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| National Institute of Standards and Technology |
|
15 CFR 230.7(a) |
NIST SP 260 |
2012 |
Catalog of NIST Standard Reference Materials and Supplement
Archived
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Consumer Product Safety Commission |
|
16 CFR 1203.3(a)(1) |
ISO 6220 |
1983 |
Draft Standard for Headforms for Use in the Testing of Protective Helmets
Archived
|
International Organization for Standardization |
| Consumer Product Safety Commission |
|
16 CFR 1203.3(a)(2) |
SAE J-211 |
1988 |
Instrumentation for Impact Tests
Archived
|
Society of Automotive Engineers |
| Consumer Product Safety Commission |
|
16 CFR 1630.4(b)(1)(iii) |
AATCC 124 |
1996 |
Appearance of Durable Press Fabrics After Repeated Home Laundering
Archived
|
American Association of Textile Chemists and Colorists |
| Consumer Product Safety Commission |
|
16 CFR 1631.4(b)(1)(iii) |
AATCC 124 |
1996 |
Appearance of Durable Press Fabrics After Repeated Home Laundering
Archived
|
American Association of Textile Chemists and Colorists |
| Consumer Product Safety Commission |
|
16 CFR 1632.5(b)(2)(iv) |
AATCC 124 |
1996 |
Appearance of Durable Press Fabrics After Repeated Home Laundering
Archived
|
American Association of Textile Chemists and Colorists |
| Technology Administration |
|
15 CFR 1150.3(a) |
Federal Standard 595A |
1987 |
Color 12199, Blaze Orange
Archived
|
Federal Specifications Standards and Test Methods |
| Food and Drug Administration |
|
21 CFR 137.180(c) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
Archived
|
AOAC International |
| Food and Drug Administration |
|
21 CFR 137.270(b) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
Archived
|
AOAC International |
| Food and Drug Administration |
|
16 CFR 1615.1 Footnote 2 |
ANSI Z535.1 |
1998 |
Standard for Safety Color Code
Archived
|
American National Standards Institute |
| Food and Drug Administration |
|
16 CFR 1616.2 Footnote 2 |
ANSI Z535.1 |
1998 |
Standard for Safety Color Code
Archived
|
American National Standards Institute |
| Food and Drug Administration |
|
16 CFR 1203.53(b) |
ANSI Z90.4 |
1984 |
Protective Headgear for Bicyclists
Archived
|
American National Standards Institute |
| Food and Drug Administration |
|
16 CFR 1203.53(b) |
ASTM F1446 |
1993 |
Standard Test Method for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
Archived
|
ASTM International |
| Food and Drug Administration |
|
16 CFR 1203.53(b) |
ASTM F1446 |
1994 |
Standard Test Method for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
Archived
|
ASTM International |
| Food and Drug Administration |
|
16 CFR 1203.53(b) |
ASTM F1447 |
1993 |
Standard Specification for Protective Headgear Used in Bicycling
Archived
|
ASTM International |
| Food and Drug Administration |
|
21 CFR 2.19 |
AOAC Official Methods |
1980 |
Official Methods of Analysis and Supplements
Archived
|
AOAC International |
| Food and Drug Administration |
|
16 CFR 1203.53(b) |
ASTM F1447 |
1994 |
Standard Specification for Protective Headgear Used in Bicycling
Archived
|
ASTM International |
| Food and Drug Administration |
|
16 CFR 1203.53(b) |
CSA D113.2-M |
1989 |
Cycling Helmets
Archived
|
Canadian Standards Association |
| Federal Highway Administration |
|
23 CFR 625.4(a)(1) |
AASHTO GDHS-7 |
2001 |
A Policy on Geometric Design of Highways and Streets
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(a)(2) |
AASHTO Publication |
2005 |
Policy on Design Standards--Interstate Systems
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(b)(1) |
AASHTO Publication |
1992 |
Standard Specification for Highway Bridges
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(b)(10) |
AASHTO Publication |
1994 |
Standard Specification for Structural Supports for Highway Signs, Luminaires, and Traffic Signals
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(b)(2) |
AASHTO Publication |
1993 |
Interim Specifications, Bridges
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(b)(3) |
AASHTO Publication |
1994 |
Interim Specifications, Bridges
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(b)(4) |
AASHTO Publication |
1995 |
Interim Specifications, Bridges
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(b)(5) |
AASHTO Publication |
1994 |
AASHTO LRFD Bridge Design Specifications, 1st Edition, U.S. Units
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(b)(6) |
AASHTO Publication |
1994 |
AASHTO LRFD Bridge Design Specifications, 1st Edition, SI Units
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(b)(7) |
AASHTO Publication |
1988 |
Standard Specification for Movable Highway Bridges
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(b)(8) |
ANSI/AASHTO/AWS D1.5 |
1995 |
Bridge Welding Code
Archived
|
American Welding Society |
| Federal Highway Administration |
|
23 CFR 625.4(b)(9) |
ANSI/AWS D1.4 |
1992 |
Structural Welding Code--Reinforcing Steel
Archived
|
American Welding Society |
| Federal Highway Administration |
|
23 CFR 625.4(c)(2) |
AASHTO Materials Standards |
1995 |
Standard Specification for Transportation Materials and Methods of Sampling and Testing, Parts I and II
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
16 CFR 1203.53(b) |
Snell N-94 |
1994 |
Standard for Protective Headgear for Use in Non-Motorized Sports
Archived
|
Snell Memorial Foundation |
| Housing and Urban Development Department |
|
24 CFR 3280.4(a) |
ARI All Standards |
2013 |
All specifications, standards and codes without specific reference
Archived
|
Air Conditioning and Refrigeration Institute |
| Housing and Urban Development Department |
|
24 CFR 3280.4(a) |
AA All Standards |
2013 |
All specifications, standards and codes without specific reference
Archived
|
Aluminum Association |
| Housing and Urban Development Department |
|
24 CFR 3280.4(a) |
AAMA All Standards |
2013 |
All specifications, standards and codes without specific reference
Archived
|
American Architectural Manufacturers Association |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
AA ASM 35 |
1980 |
Aluminum Sheet Metal Work in Building Construction
Archived
|
Aluminum Association |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(w)(1) |
IME Publication 2 |
1964 |
American Table of Distances for Storage of Explosives
Archived
|
Institute of Makers of Explosives |
| Coast Guard |
|
46 CFR 169.115(c)(1) |
ABYC H-24.9 |
1975 |
Fuel Strainers and Fuel Filters
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
21 CFR 172.833(b)(3) |
FAO Food and Nutrition Paper 5 |
1991 |
Compendium of Food Additive Specifications, Addendum 4
Archived
|
Food and Agricultural Organization of the United Nations |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACCA Manual J |
1986 |
Load Calculation for Residential Winter and Summer Air Conditioning
Archived
|
Air Conditioning Contractors of America |
| Housing and Urban Development Department |
|
24 CFR 3285.4(b)(1) |
ACCA Manual J |
2013 |
Residential Load Calculation, 8th Edition
Archived
|
Air Conditioning Contractors of America |
| Coast Guard |
|
46 CFR 169.115(c)(1) |
ABYC A-1 |
1978 |
Marine Liquefied Petroleum Gas Systems
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 147.7(b)(1) |
ABYC H-25 |
1981 |
Portable Fuel Systems for Flammable Liquids
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 27.102(b) |
ABYC H-25 |
1986 |
Portable Fuel Systems for Flammable Liquids
Archived
|
American Boat and Yacht Council |