This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (32) | 3M Test Method 0222 | 1994 | Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk | 3M Corporation | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995a | 1971 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(u)(5) | SAE J-765 | 1961 | Recommended Practice for Crane Loading Stability Test Code | Society of Automotive Engineers | |
Public Health Service | 42 CFR 37.10(f)(5) | DICOM Standard PS 3.12-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 12: Media Formats and Physical Media for Media Interchange | National Electrical Manufacturers Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(18) | ASTM D 1123 | 1959 | Standard Method of Test for Water in Concentrated Engine Antifreezes by the Iodine Reagent Method | ASTM International | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM B 694 | 1986 | Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(12) | SAE J-394 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) Note | Chromocult Coliform Agar Presence/Absence Membrane | 2000 | Simultaneous detection of Coliform bacteria and E. coli in water | Merck KGaA | |
Environmental Protection Agency | 40 CFR 799.9120(f)(4) | OECD No. 425 | 1998 | Guidelines for Testing of Chemicals, Acute Oral Toxicity: Up-and-Down Procedure | Organization for Economic Cooperation and Development | |
Coast Guard | 46 CFR 169.703(c)(7)(i) | NFPA 302 | 1980 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1918.3(b)(2) | ANSI A14.2 | 1990 | Safety Requirements for Portable Metal Ladders | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(34) | ANSI/ISEA Z89.1 | 1997 | Personnel Protection—Protective Headwear for Industrial Workers—Requirements | International Safety Equipment Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (32) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 111.54-1(b) | UL 489 | 2000 | Molded-Case Circuit Breakers and Circuit Breaker Enclosures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 108.503 | IMO Resolution A.649(16) | 1989 | Code for the Construction and Equipment of Mobile Offshore Drilling Units (MODU Code), with amendments of June 1991 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 9 | ASTM Annual Book of Standards | 1996 | Water and Environmental Technology--Section 11.02 | ASTM International | |
Environmental Protection Agency | 40 CFR 430, Appendix A | EPA Method 1650 | 2014 | Adsorbable Organic Halides by Adsorption and Coulometric Titration | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.47(r)(1)(v) | ASTM D 5599 | 2010 | Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection | ASTM International | |
Coast Guard | 46 CFR 111.105-3 | IEC 60079 | 2007 | Electrical Apparatus for Explosive Gas Atmospheres Series | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 63, Subpart ZZZZ, Table 4, (3)(a)(iv)(1) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5325-2C | 1975 | Airport Design Standards--Airports Served by Air Carriers--Surface Gradient and Line-of-Sight (Through change 1, 1975) | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 164.018-5(a)(1) | FedSpec L-P-375C | 1970 | Plastic Film, Flexible, Vinyl Chloride | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1910.106(a)(14)(i) | ASTM D 56 | 1970 | Standard Test Method for Flash Point by Tag Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 76.15(a)(2) | ASTM D 3172 | 1989 | Standard Practice for Proximate Analysis of Coal and Coke | ASTM International | |
Coast Guard | 33 CFR 155.140(c)(2) | ASTM F 715 | 1995 | Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage | ASTM International | |
Coast Guard | 46 CFR 160.048-3(d)(1) | FedSpec CCC-C-426D | 1995 | Cloth, Drill, Cotton | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(10)(iv), Table H-26 | ASME B&PV Code | 1949 | Boiler and Pressure Vessel Code, Section VIII, Paragraph 201 | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 175.540(d) | IMO Resolution A.741(18) | 1993 | International Management Code for the Safe Operation of Ships and for Pollution Prevention | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (33) | AOAC Method 993.14 | 1998 | Magnesium-Total, mg/L | AOAC International | |
Research and Special Programs Administration | 49 CFR 195.205(b)(3) | API 510 | 1997 | Pressure Vessel Inspection Code | American Petroleum Institute | |
Coast Guard | 46 CFR 38.01-3(b) | ASTM D 4986 | 1998 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 98.314(d) | ASTM D 5373 | 2008 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Sulfate) | ASTM D 516 | 1990 | Standard Test Method for Sulfate Ion in Water | ASTM International | |
Research and Special Programs Administration | 46 CFR 113.65-5 | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Health and Human Services Department | 45 CFR 162.1802(a)(3) | ASC X12N 837 | 2000 | Health Care Claim: Professional, version 4010 | Washington Publishing Company | |
Food and Drug Administration | 21 CFR 177.1595(c)(1) | FDA Publication | 1989 | Intrinsic Viscosity of ULTEM Polyetherimide Using Chloroform as a Solvent | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 160.133-7(b)(3) | ASTM A 276 | 2008 | Standard Specification for Stainless Steel Bars and Shapes | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 573.182(a) | Drawing No. 175-0000, Sheet 1 of 6 | 2008 | Transducers-crash test sensors for the ES-2re Crash Test Dummy | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Research and Special Programs Administration | 18 CFR 33.32(a)(3) | ALI Publication | 1992 | Restatement of the Law (Third) Trusts Section 227 | American Law Institute | |
Coast Guard | 46 CFR 161.002-4(b)(4) | ABS Publication | 1996 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Environmental Protection Agency | 40 CFR 75.6(a)(46) | ASTM D 4809 | 2000 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | EPA Method 900.0 | 1980 | Gross Alpha and Gross Beta Radioactivity | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.107a(e)(1)(ii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 52.741(x)(1)(i) | 35 I.A.C. 215, Subpart B | 1989 | Administrative Code | State of Illinois | |
Energy Department | 10 CFR 434.404.1 | ANSI Z21.56 | 1994 | Gas-Fired Pool Heaters (RS-38) | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 59.505(d) | CAARB Method 310 | 2005 | Determination of Volatile Organic Compounds (VOC) in Consumer Products and Reactive Organic Compounds in Aerosol Coating Products | California Air Resources Board | |
Environmental Protection Agency | 40 CFR 761.19(a)(2) | ASTM D 129 | 1978 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (55) | ASTM D 3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
Coast Guard | 46 CFR 175.600(b) Table | ASTM B 96 | 1993 | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels | ASTM International | |
National Oceanic and Atmospheric Administration | 50 CFR 226.210 | USGS Paper 2294 | 1987 | Hydrologic Unit Maps, Water Supply | U.S. Geological Survey |